No One
Actions

Authored By

	amckinley
	Apr 27 2017, 5:05 PM

Size

19 KB

Referenced Files

None

Subscribers

None

View Options

	#
	# This is the main Apache HTTP server configuration file. It contains the
	# configuration directives that give the server its instructions.
	# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
	# In particular, see
	# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
	# for a discussion of each configuration directive.
	#
	# Do NOT simply read the instructions in here without understanding
	# what they do. They're here only as hints or reminders. If you are unsure
	# consult the online docs. You have been warned.
	#
	# Configuration and logfile names: If the filenames you specify for many
	# of the server's control files begin with "/" (or "drive:/" for Win32), the
	# server will use that explicit path. If the filenames do not begin
	# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
	# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
	# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
	# will be interpreted as '/logs/access_log'.

	#
	# ServerRoot: The top of the directory tree under which the server's
	# configuration, error, and log files are kept.
	#
	# Do not add a slash at the end of the directory path. If you point
	# ServerRoot at a non-local disk, be sure to specify a local disk on the
	# Mutex directive, if file-based mutexes are used. If you wish to share the
	# same ServerRoot for multiple httpd daemons, you will need to change at
	# least PidFile.
	#
	ServerRoot "/usr/local/opt/httpd24"

	#
	# Mutex: Allows you to set the mutex mechanism and mutex file directory
	# for individual mutexes, or change the global defaults
	#
	# Uncomment and change the directory if mutexes are file-based and the default
	# mutex file directory is not on a local disk or is not appropriate for some
	# other reason.
	#
	# Mutex default:/usr/local/var/run/apache2

	#
	# Listen: Allows you to bind Apache to specific IP addresses and/or
	# ports, instead of the default. See also the <VirtualHost>
	# directive.
	#
	# Change this to Listen on specific IP addresses as shown below to
	# prevent Apache from glomming onto all bound IP addresses.
	#
	#Listen 12.34.56.78:80
	Listen 80

	#
	# Dynamic Shared Object (DSO) Support
	#
	# To be able to use the functionality of a module which was built as a DSO you
	# have to place corresponding `LoadModule' lines at this location so the
	# directives contained in it are actually available _before_ they are used.
	# Statically compiled modules (those listed by `httpd -l') do not need
	# to be loaded here.
	#
	# Example:
	# LoadModule foo_module modules/mod_foo.so
	#
	LoadModule authn_file_module libexec/mod_authn_file.so
	#LoadModule authn_dbm_module libexec/mod_authn_dbm.so
	#LoadModule authn_anon_module libexec/mod_authn_anon.so
	#LoadModule authn_dbd_module libexec/mod_authn_dbd.so
	#LoadModule authn_socache_module libexec/mod_authn_socache.so
	LoadModule authn_core_module libexec/mod_authn_core.so
	LoadModule authz_host_module libexec/mod_authz_host.so
	LoadModule authz_groupfile_module libexec/mod_authz_groupfile.so
	LoadModule authz_user_module libexec/mod_authz_user.so
	#LoadModule authz_dbm_module libexec/mod_authz_dbm.so
	#LoadModule authz_owner_module libexec/mod_authz_owner.so
	#LoadModule authz_dbd_module libexec/mod_authz_dbd.so
	LoadModule authz_core_module libexec/mod_authz_core.so
	LoadModule access_compat_module libexec/mod_access_compat.so
	LoadModule auth_basic_module libexec/mod_auth_basic.so
	#LoadModule auth_form_module libexec/mod_auth_form.so
	#LoadModule auth_digest_module libexec/mod_auth_digest.so
	#LoadModule allowmethods_module libexec/mod_allowmethods.so
	#LoadModule file_cache_module libexec/mod_file_cache.so
	#LoadModule cache_module libexec/mod_cache.so
	#LoadModule cache_disk_module libexec/mod_cache_disk.so
	#LoadModule cache_socache_module libexec/mod_cache_socache.so
	#LoadModule socache_shmcb_module libexec/mod_socache_shmcb.so
	#LoadModule socache_dbm_module libexec/mod_socache_dbm.so
	#LoadModule socache_memcache_module libexec/mod_socache_memcache.so
	#LoadModule watchdog_module libexec/mod_watchdog.so
	#LoadModule macro_module libexec/mod_macro.so
	#LoadModule dbd_module libexec/mod_dbd.so
	#LoadModule dumpio_module libexec/mod_dumpio.so
	#LoadModule echo_module libexec/mod_echo.so
	#LoadModule buffer_module libexec/mod_buffer.so
	#LoadModule data_module libexec/mod_data.so
	#LoadModule ratelimit_module libexec/mod_ratelimit.so
	LoadModule reqtimeout_module libexec/mod_reqtimeout.so
	#LoadModule ext_filter_module libexec/mod_ext_filter.so
	#LoadModule request_module libexec/mod_request.so
	#LoadModule include_module libexec/mod_include.so
	LoadModule filter_module libexec/mod_filter.so
	#LoadModule reflector_module libexec/mod_reflector.so
	#LoadModule substitute_module libexec/mod_substitute.so
	#LoadModule sed_module libexec/mod_sed.so
	#LoadModule charset_lite_module libexec/mod_charset_lite.so
	#LoadModule deflate_module libexec/mod_deflate.so
	#LoadModule xml2enc_module libexec/mod_xml2enc.so
	#LoadModule proxy_html_module libexec/mod_proxy_html.so
	LoadModule mime_module libexec/mod_mime.so
	LoadModule log_config_module libexec/mod_log_config.so
	#LoadModule log_debug_module libexec/mod_log_debug.so
	#LoadModule log_forensic_module libexec/mod_log_forensic.so
	#LoadModule logio_module libexec/mod_logio.so
	LoadModule env_module libexec/mod_env.so
	#LoadModule mime_magic_module libexec/mod_mime_magic.so
	#LoadModule expires_module libexec/mod_expires.so
	LoadModule headers_module libexec/mod_headers.so
	#LoadModule usertrack_module libexec/mod_usertrack.so
	#LoadModule unique_id_module libexec/mod_unique_id.so
	LoadModule setenvif_module libexec/mod_setenvif.so
	LoadModule version_module libexec/mod_version.so
	#LoadModule remoteip_module libexec/mod_remoteip.so
	#LoadModule proxy_module libexec/mod_proxy.so
	#LoadModule proxy_connect_module libexec/mod_proxy_connect.so
	#LoadModule proxy_ftp_module libexec/mod_proxy_ftp.so
	#LoadModule proxy_http_module libexec/mod_proxy_http.so
	#LoadModule proxy_fcgi_module libexec/mod_proxy_fcgi.so
	#LoadModule proxy_scgi_module libexec/mod_proxy_scgi.so
	#LoadModule proxy_fdpass_module libexec/mod_proxy_fdpass.so
	#LoadModule proxy_wstunnel_module libexec/mod_proxy_wstunnel.so
	#LoadModule proxy_ajp_module libexec/mod_proxy_ajp.so
	#LoadModule proxy_balancer_module libexec/mod_proxy_balancer.so
	#LoadModule proxy_express_module libexec/mod_proxy_express.so
	#LoadModule proxy_hcheck_module libexec/mod_proxy_hcheck.so
	#LoadModule session_module libexec/mod_session.so
	#LoadModule session_cookie_module libexec/mod_session_cookie.so
	#LoadModule session_crypto_module libexec/mod_session_crypto.so
	#LoadModule session_dbd_module libexec/mod_session_dbd.so
	#LoadModule slotmem_shm_module libexec/mod_slotmem_shm.so
	#LoadModule slotmem_plain_module libexec/mod_slotmem_plain.so
	#LoadModule ssl_module libexec/mod_ssl.so
	#LoadModule dialup_module libexec/mod_dialup.so
	#LoadModule http2_module libexec/mod_http2.so
	#LoadModule lbmethod_byrequests_module libexec/mod_lbmethod_byrequests.so
	#LoadModule lbmethod_bytraffic_module libexec/mod_lbmethod_bytraffic.so
	#LoadModule lbmethod_bybusyness_module libexec/mod_lbmethod_bybusyness.so
	#LoadModule lbmethod_heartbeat_module libexec/mod_lbmethod_heartbeat.so
	LoadModule unixd_module libexec/mod_unixd.so
	#LoadModule heartbeat_module libexec/mod_heartbeat.so
	#LoadModule heartmonitor_module libexec/mod_heartmonitor.so
	#LoadModule dav_module libexec/mod_dav.so
	LoadModule status_module libexec/mod_status.so
	LoadModule autoindex_module libexec/mod_autoindex.so
	#LoadModule asis_module libexec/mod_asis.so
	#LoadModule info_module libexec/mod_info.so
	#LoadModule suexec_module libexec/mod_suexec.so
	<IfModule mpm_prefork_module>
	#LoadModule cgi_module libexec/mod_cgi.so
	</IfModule>
	<IfModule !mpm_prefork_module>
	#LoadModule cgid_module libexec/mod_cgid.so
	</IfModule>
	#LoadModule dav_fs_module libexec/mod_dav_fs.so
	#LoadModule dav_lock_module libexec/mod_dav_lock.so
	#LoadModule vhost_alias_module libexec/mod_vhost_alias.so
	#LoadModule negotiation_module libexec/mod_negotiation.so
	LoadModule dir_module libexec/mod_dir.so
	#LoadModule actions_module libexec/mod_actions.so
	#LoadModule speling_module libexec/mod_speling.so
	#LoadModule userdir_module libexec/mod_userdir.so
	LoadModule alias_module libexec/mod_alias.so
	LoadModule rewrite_module libexec/mod_rewrite.so
	LoadModule php5_module /usr/local/opt/php56/libexec/apache2/libphp5.so

	<IfModule unixd_module>
	#
	# If you wish httpd to run as a different user or group, you must run
	# httpd as root initially and it will switch.
	#
	# User/Group: The name (or #number) of the user/group to run httpd as.
	# It is usually good practice to create a dedicated user and group for
	# running httpd, as with most system services.
	#
	User amckinley
	Group staff

	</IfModule>

	# 'Main' server configuration
	#
	# The directives in this section set up the values used by the 'main'
	# server, which responds to any requests that aren't handled by a
	# <VirtualHost> definition. These values also provide defaults for
	# any <VirtualHost> containers you may define later in the file.
	#
	# All of these directives may appear inside <VirtualHost> containers,
	# in which case these default settings will be overridden for the
	# virtual host being defined.
	#

	#
	# ServerAdmin: Your address, where problems with the server should be
	# e-mailed. This address appears on some server-generated pages, such
	# as error documents. e.g. admin@your-domain.com
	#
	ServerAdmin you@example.com

	#
	# ServerName gives the name and port that the server uses to identify itself.
	# This can often be determined automatically, but we recommend you specify
	# it explicitly to prevent problems during startup.
	#
	# If your host doesn't have a registered DNS name, enter its IP address here.
	#
	ServerName local.phacility.com:80

	#
	# Deny access to the entirety of your server's filesystem. You must
	# explicitly permit access to web content directories in other
	# <Directory> blocks below.
	#
	<Directory />
	AllowOverride none
	Require all denied
	</Directory>

	#
	# Note that from this point forward you must specifically allow
	# particular features to be enabled - so if something's not working as
	# you might expect, make sure that you have specifically enabled it
	# below.
	#

	#
	# DocumentRoot: The directory out of which you will serve your
	# documents. By default, all requests are taken from this directory, but
	# symbolic links and aliases may be used to point to other locations.
	#
	DocumentRoot "/Users/amckinley/src/phacility/phabricator/webroot"
	<Directory "/Users/amckinley/src/phacility/phabricator/webroot">
	#
	# Possible values for the Options directive are "None", "All",
	# or any combination of:
	# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
	#
	# Note that "MultiViews" must be named explicitly --- "Options All"
	# doesn't give it to you.
	#
	# The Options directive is both complicated and important. Please see
	# http://httpd.apache.org/docs/2.4/mod/core.html#options
	# for more information.
	#
	Options Indexes FollowSymLinks

	#
	# AllowOverride controls what directives may be placed in .htaccess files.
	# It can be "All", "None", or any combination of the keywords:
	# AllowOverride FileInfo AuthConfig Limit
	#
	AllowOverride None

	#
	# Controls who can get stuff from this server.
	#
	Require all granted
	</Directory>

	#
	# DirectoryIndex: sets the file that Apache will serve if a directory
	# is requested.
	#
	<IfModule dir_module>
	DirectoryIndex index.php index.html
	</IfModule>

	<FilesMatch \.php$>
	SetHandler application/x-httpd-php
	</FilesMatch>

	#
	# The following lines prevent .htaccess and .htpasswd files from being
	# viewed by Web clients.
	#
	<Files ".ht*">
	Require all denied
	</Files>

	#
	# ErrorLog: The location of the error log file.
	# If you do not specify an ErrorLog directive within a <VirtualHost>
	# container, error messages relating to that virtual host will be
	# logged here. If you do define an error logfile for a <VirtualHost>
	# container, that host's errors will be logged there and not here.
	#
	ErrorLog "/usr/local/var/log/apache2/error_log"
	ErrorLogFormat "[%t] %M"

	#
	# LogLevel: Control the number of messages logged to the error_log.
	# Possible values include: debug, info, notice, warn, error, crit,
	# alert, emerg.
	#
	LogLevel warn

	<IfModule log_config_module>
	#
	# The following directives define some format nicknames for use with
	# a CustomLog directive (see below).
	#
	LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
	LogFormat "%h %l %u %t \"%r\" %>s %b" common

	<IfModule logio_module>
	# You need to enable mod_logio.c to use %I and %O
	LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
	</IfModule>

	#
	# The location and format of the access logfile (Common Logfile Format).
	# If you do not define any access logfiles within a <VirtualHost>
	# container, they will be logged here. Contrariwise, if you do
	# define per-<VirtualHost> access logfiles, transactions will be
	# logged therein and not in this file.
	#
	CustomLog "/usr/local/var/log/apache2/access_log" common

	#
	# If you prefer a logfile with access, agent, and referer information
	# (Combined Logfile Format) you can use the following directive.
	#
	#CustomLog "/usr/local/var/log/apache2/access_log" combined
	</IfModule>

	<IfModule alias_module>
	#
	# Redirect: Allows you to tell clients about documents that used to
	# exist in your server's namespace, but do not anymore. The client
	# will make a new request for the document at its new location.
	# Example:
	# Redirect permanent /foo http://www.example.com/bar

	#
	# Alias: Maps web paths into filesystem paths and is used to
	# access content that does not live under the DocumentRoot.
	# Example:
	# Alias /webpath /full/filesystem/path
	#
	# If you include a trailing / on /webpath then the server will
	# require it to be present in the URL. You will also likely
	# need to provide a <Directory> section to allow access to
	# the filesystem path.

	#
	# ScriptAlias: This controls which directories contain server scripts.
	# ScriptAliases are essentially the same as Aliases, except that
	# documents in the target directory are treated as applications and
	# run by the server when requested rather than as documents sent to the
	# client. The same rules about trailing "/" apply to ScriptAlias
	# directives as to Alias.
	#
	ScriptAlias /cgi-bin/ "/usr/local/var/apache2/cgi-bin/"

	</IfModule>

	<IfModule cgid_module>
	#
	# ScriptSock: On threaded servers, designate the path to the UNIX
	# socket used to communicate with the CGI daemon of mod_cgid.
	#
	#Scriptsock cgisock
	</IfModule>

	#
	# "/usr/local/var/apache2/cgi-bin" should be changed to whatever your ScriptAliased
	# CGI directory exists, if you have that configured.
	#
	<Directory "/usr/local/var/apache2/cgi-bin">
	AllowOverride None
	Options None
	Require all granted
	</Directory>

	<IfModule headers_module>
	#
	# Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
	# backend servers which have lingering "httpoxy" defects.
	# 'Proxy' request header is undefined by the IETF, not listed by IANA
	#
	RequestHeader unset Proxy early
	</IfModule>

	<IfModule mime_module>
	#
	# TypesConfig points to the file containing the list of mappings from
	# filename extension to MIME-type.
	#
	TypesConfig /usr/local/etc/apache2/2.4/mime.types

	#
	# AddType allows you to add to or override the MIME configuration
	# file specified in TypesConfig for specific file types.
	#
	#AddType application/x-gzip .tgz
	#
	# AddEncoding allows you to have certain browsers uncompress
	# information on the fly. Note: Not all browsers support this.
	#
	#AddEncoding x-compress .Z
	#AddEncoding x-gzip .gz .tgz
	#
	# If the AddEncoding directives above are commented-out, then you
	# probably should define those extensions to indicate media types:
	#
	AddType application/x-compress .Z
	AddType application/x-gzip .gz .tgz

	#
	# AddHandler allows you to map certain file extensions to "handlers":
	# actions unrelated to filetype. These can be either built into the server
	# or added with the Action directive (see below)
	#
	# To use CGI scripts outside of ScriptAliased directories:
	# (You will also need to add "ExecCGI" to the "Options" directive.)
	#
	#AddHandler cgi-script .cgi

	# For type maps (negotiated resources):
	#AddHandler type-map var

	#
	# Filters allow you to process content before it is sent to the client.
	#
	# To parse .shtml files for server-side includes (SSI):
	# (You will also need to add "Includes" to the "Options" directive.)
	#
	#AddType text/html .shtml
	#AddOutputFilter INCLUDES .shtml
	</IfModule>

	#
	# The mod_mime_magic module allows the server to use various hints from the
	# contents of the file itself to determine its type. The MIMEMagicFile
	# directive tells the module where the hint definitions are located.
	#
	#MIMEMagicFile /usr/local/etc/apache2/2.4/magic

	#
	# Customizable error responses come in three flavors:
	# 1) plain text 2) local redirects 3) external redirects
	#
	# Some examples:
	#ErrorDocument 500 "The server made a boo boo."
	#ErrorDocument 404 /missing.html
	#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
	#ErrorDocument 402 http://www.example.com/subscription_info.html
	#

	#
	# MaxRanges: Maximum number of Ranges in a request before
	# returning the entire resource, or one of the special
	# values 'default', 'none' or 'unlimited'.
	# Default setting is to accept 200 Ranges.
	#MaxRanges unlimited

	#
	# EnableMMAP and EnableSendfile: On systems that support it,
	# memory-mapping or the sendfile syscall may be used to deliver
	# files. This usually improves server performance, but must
	# be turned off when serving from networked-mounted
	# filesystems or if support for these functions is otherwise
	# broken on your system.
	# Defaults: EnableMMAP On, EnableSendfile Off
	#
	#EnableMMAP off
	#EnableSendfile on

	# Supplemental configuration
	#
	# The configuration files in the /usr/local/etc/apache2/2.4/extra/ directory can be
	# included to add extra features or to modify the default configuration of
	# the server, or you may simply copy their contents here and change as
	# necessary.

	# Server-pool management (MPM specific)
	#Include /usr/local/etc/apache2/2.4/extra/httpd-mpm.conf

	# Multi-language error messages
	#Include /usr/local/etc/apache2/2.4/extra/httpd-multilang-errordoc.conf

	# Fancy directory listings
	#Include /usr/local/etc/apache2/2.4/extra/httpd-autoindex.conf

	# Language settings
	#Include /usr/local/etc/apache2/2.4/extra/httpd-languages.conf

	# User home directories
	#Include /usr/local/etc/apache2/2.4/extra/httpd-userdir.conf

	# Real-time info on requests and configuration
	#Include /usr/local/etc/apache2/2.4/extra/httpd-info.conf

	# Virtual hosts
	Include /usr/local/etc/apache2/2.4/extra/httpd-vhosts.conf

	# Local access to the Apache HTTP Server Manual
	#Include /usr/local/etc/apache2/2.4/extra/httpd-manual.conf

	# Distributed authoring and versioning (WebDAV)
	#Include /usr/local/etc/apache2/2.4/extra/httpd-dav.conf

	# Various default settings
	#Include /usr/local/etc/apache2/2.4/extra/httpd-default.conf

	# Configure mod_proxy_html to understand HTML4/XHTML1
	<IfModule proxy_html_module>
	Include /usr/local/etc/apache2/2.4/extra/proxy-html.conf
	</IfModule>

	# Secure (SSL/TLS) connections
	#Include /usr/local/etc/apache2/2.4/extra/httpd-ssl.conf
	#
	# Note: The following must must be present to support
	# starting without SSL on platforms with no /dev/random equivalent
	# but a statically compiled-in mod_ssl.
	#
	<IfModule ssl_module>
	SSLRandomSeed startup builtin
	SSLRandomSeed connect builtin
	</IfModule>

File Metadata

Mime Type: text/plain; charset=utf-8
Storage Engine: blob
Storage Format: Encrypted (AES-256-CBC)
Storage Handle: 631431
Default Alt Text: (19 KB)

No OneActions

View Options

File Metadata

Event Timeline

No One
Actions