Page MenuHomePhabricator
Files F18588305

D10628.diff
No OneTemporary
Actions

D10628.diff
View Options

diff --git a/conf/__init_conf__.php b/conf/__init_conf__.php
--- a/conf/__init_conf__.php
+++ b/conf/__init_conf__.php
@@ -22,6 +22,24 @@
if ($conf === false) {
if (!Filesystem::pathExists($full_config_path)) {
+
+ // These are very old configuration files which we used to ship with
+ // by default. File based configuration was de-emphasized once web-based
+ // configuration was built. The actual files were removed to reduce
+ // user confusion over how to configure Phabricator.
+
+ switch ($config) {
+ case 'default':
+ case 'production':
+ return array();
+ case 'development':
+ return array(
+ 'phabricator.developer-mode' => true,
+ 'darkconsole.enabled' => true,
+ 'celerity.minify' => false,
+ );
+ }
+
$files = id(new FileFinder($root.'/conf/'))
->withType('f')
->withSuffix('conf.php')
diff --git a/conf/default.conf.php b/conf/default.conf.php
deleted file mode 100644
--- a/conf/default.conf.php
+++ /dev/null
@@ -1,1090 +0,0 @@
-<?php
-
-// IMPORTANT: DO NOT EDIT THIS FILE.
-// This file is no longer read by default, and your efforts will have no effect.
-// Follow the instructions in the documentation to configure Phabricator.
-
-return array(
-
- // The root URI which Phabricator is installed on.
- // Example: "http://phabricator.example.com/"
- 'phabricator.base-uri' => null,
-
- // If you have multiple environments, provide the production environment URI
- // here so that emails, etc., generated in development/sandbox environments
- // contain the right links.
- 'phabricator.production-uri' => null,
-
-// -- IMPORTANT! Security! -------------------------------------------------- //
-
- // IMPORTANT: By default, Phabricator serves files from the same domain the
- // application lives on. This is convenient but not secure: it creates a large
- // class of vulnerabilities which can not be generally mitigated.
- //
- // To avoid this, you should configure a second domain in the same way you
- // have the primary domain configured (e.g., point it at the same machine and
- // set up the same vhost rules) and provide it here. For instance, if your
- // primary install is on "http://www.phabricator-example.com/", you could
- // configure "http://www.phabricator-files.com/" and specify the entire
- // domain (with protocol) here. This will enforce that files are
- // served only from the alternate domain. Ideally, you should use a
- // completely separate domain name rather than just a different subdomain.
- //
- // It is STRONGLY RECOMMENDED that you configure this. Your install is NOT
- // SECURE unless you do so.
- 'security.alternate-file-domain' => null,
-
- // Default key for HMAC digests where the key is not important (i.e., the
- // hash itself is secret). You can change this if you want (to any other
- // string), but doing so will break existing sessions and CSRF tokens.
- 'security.hmac-key' => '[D\t~Y7eNmnQGJ;rnH6aF;m2!vJ8@v8C=Cs:aQS\.Qw',
-
- // If the web server responds to both HTTP and HTTPS requests but you want
- // users to connect with only HTTPS, you can set this to true to make
- // Phabricator redirect HTTP requests to HTTPS.
- //
- // Normally, you should just configure your server not to accept HTTP traffic,
- // but this setting may be useful if you originally used HTTP and have now
- // switched to HTTPS but don't want to break old links, or if your webserver
- // sits behind a load balancer which terminates HTTPS connections and you
- // can not reasonably configure more granular behavior there.
- //
- // NOTE: Phabricator determines if a request is HTTPS or not by examining the
- // PHP $_SERVER['HTTPS'] variable. If you run Apache/mod_php this will
- // probably be set correctly for you automatically, but if you run Phabricator
- // as CGI/FCGI (e.g., through nginx or lighttpd), you need to configure your
- // web server so that it passes the value correctly based on the connection
- // type. Alternatively, you can add a PHP snippet to the top of this
- // configuration file to directly set $_SERVER['HTTPS'] to the correct value.
- 'security.require-https' => false,
-
- // Is Phabricator permitted to make outbound HTTP requests?
- 'security.allow-outbound-http' => true,
-
-
-// -- Internationalization -------------------------------------------------- //
-
- // This allows customizing texts used in Phabricator. The class must extend
- // PhabricatorTranslation.
- 'translation.provider' => 'PhabricatorEnglishTranslation',
-
- // You can use 'translation.override' if you don't want to create a full
- // translation to give users an option for switching to it and you just want
- // to override some strings in the default translation.
- 'translation.override' => array(),
-
-
-// -- Access Policies ------------------------------------------------------- //
-
- // Phabricator allows you to set the visibility of objects (like repositories
- // and source code) to "Public", which means anyone on the internet can see
- // them, even without being logged in. This is great for open source, but
- // some installs may never want to make anything public, so this policy is
- // disabled by default. You can enable it here, which will let you set the
- // policy for objects to "Public". With this option disabled, the most open
- // policy is "All Users", which means users must be logged in to view things.
- 'policy.allow-public' => false,
-
-
-// -- Logging --------------------------------------------------------------- //
-
- // To enable the Phabricator access log, specify a path here. The Phabricator
- // access log can provide more detailed information about Phabricator access
- // than normal HTTP access logs (for instance, it can show logged-in users,
- // controllers, and other application data). If not set, no log will be
- // written.
- //
- // Make sure the PHP process can write to the log!
- 'log.access.path' => null,
-
- // Format for the access log. If not set, the default format will be used:
- //
- // "[%D]\t%h\t%u\t%M\t%C\t%m\t%U\t%c\t%T"
- //
- // Available variables are:
- //
- // - %c The HTTP response code.
- // - %C The controller which handled the request.
- // - %D The request date.
- // - %e Epoch timestamp.
- // - %h The webserver's host name.
- // - %p The PID of the server process.
- // - %R The HTTP referrer.
- // - %r The remote IP.
- // - %T The request duration, in microseconds.
- // - %U The request path.
- // - %u The logged-in username, if one is logged in.
- // - %P The logged-in user PHID, if one is logged in.
- // - %M The HTTP method.
- // - %m For conduit, the Conduit method which was invoked.
- //
- // If a variable isn't available (for example, %m appears in the file format
- // but the request is not a Conduit request), it will be rendered as "-".
- //
- // Note that the default format is subject to change in the future, so if you
- // rely on the log's format, specify it explicitly.
- 'log.access.format' => null,
-
-
-// -- DarkConsole ----------------------------------------------------------- //
-
- // DarkConsole is a administrative debugging/profiling tool built into
- // Phabricator. You can leave it disabled unless you're developing against
- // Phabricator.
-
- // Determines whether or not DarkConsole is available. DarkConsole exposes
- // some data like queries and stack traces, so you should be careful about
- // turning it on in production (although users can not normally see it, even
- // if the deployment configuration enables it).
- 'darkconsole.enabled' => false,
-
- // Always enable DarkConsole, even for logged out users. This potentially
- // exposes sensitive information to users, so make sure untrusted users can
- // not access an install running in this mode. You should definitely leave
- // this off in production. It is only really useful for using DarkConsole
- // utilities to debug or profile logged-out pages. You must set
- // 'darkconsole.enabled' to use this option.
- 'darkconsole.always-on' => false,
-
- // Map of additional configuration values to lock.
- 'config.lock' => array(),
-
- // Map of additional configuration values to hide.
- 'config.hide' => array(),
-
- // Map of additional configuration values to mask.
- 'config.mask' => array(),
-
- // Ignore setup warnings of the following issues.
- 'config.ignore-issues' => array(),
-
-// -- MySQL --------------------------------------------------------------- //
-
- // Class providing database configuration. It must implement
- // DatabaseConfigurationProvider.
- 'mysql.configuration-provider' => 'DefaultDatabaseConfigurationProvider',
-
- // The username to use when connecting to MySQL.
- 'mysql.user' => 'root',
-
- // The password to use when connecting to MySQL.
- 'mysql.pass' => '',
-
- // The MySQL server to connect to.
- 'mysql.host' => 'localhost',
-
- // If you want to connect to a different port than the default (which is 3306)
- 'mysql.port' => null,
-
- // Phabricator supports PHP extensions MySQL and MySQLi. It is possible to
- // implement also other access mechanism (e.g. PDO_MySQL). The class must
- // extend AphrontMySQLDatabaseConnectionBase.
- 'mysql.implementation' => (extension_loaded('mysqli')
- ? 'AphrontMySQLiDatabaseConnection'
- : 'AphrontMySQLDatabaseConnection'),
-
-
-// -- Notifications --------------------------------------------------------- //
-
- // Set this to true to enable real-time notifications. You must also run a
- // notification server for this to work. Consult the documentation in
- // "Notifications User Guide: Setup and Configuration" for instructions.
- 'notification.enabled' => false,
-
- // Client port for the realtime server to listen on, and for realtime clients
- // to connect to. Use "localhost" if you are running the notification server
- // on the same host as the web server.
- 'notification.client-uri' => 'http://localhost:22280/',
-
- // URI and port for the notification root server.
- 'notification.server-uri' => 'http://localhost:22281/',
-
- // The server must be started as root so it can bind to privileged ports, but
- // if you specify a user here it will drop permissions after binding.
- 'notification.user' => null,
-
- // Location where the server should log to.
- 'notification.log' => '/var/log/aphlict.log',
-
- // PID file to use.
- 'notification.pidfile' => '/var/run/aphlict.pid',
-
- // Enable this option to get additional debug output in the browser.
- 'notification.debug' => false,
-
-
-// -- Email ----------------------------------------------------------------- //
-
- // Some Phabricator tools send email notifications, e.g. when Differential
- // revisions are updated or Maniphest tasks are changed. These options allow
- // you to configure how email is delivered.
-
- // You can test your mail setup by going to "MetaMTA" in the web interface,
- // clicking "Send New Message", and then composing a message.
-
- // Default address to send mail "From".
- 'metamta.default-address' => 'noreply@example.com',
-
- // Domain used to generate Message-IDs.
- 'metamta.domain' => 'example.com',
-
- // When a message is sent to multiple recipients (for example, several
- // reviewers on a code review), Phabricator can either deliver one email to
- // everyone (e.g., "To: alincoln, usgrant, htaft") or separate emails to each
- // user (e.g., "To: alincoln", "To: usgrant", "To: htaft"). The major
- // advantages and disadvantages of each approach are:
- //
- // - One mail to everyone:
- // - Recipients can see To/Cc at a glance.
- // - If you use mailing lists, you won't get duplicate mail if you're
- // a normal recipient and also Cc'd on a mailing list.
- // - Getting threading to work properly is harder, and probably requires
- // making mail less useful by turning off options.
- // - Sometimes people will "Reply All" and everyone will get two mails,
- // one from the user and one from Phabricator turning their mail into
- // a comment.
- // - Not supported with a private reply-to address.
- // - Mails are sent in the server default translation.
- // - One mail to each user:
- // - Recipients need to look in the mail body to see To/Cc.
- // - If you use mailing lists, recipients may sometimes get duplicate
- // mail.
- // - Getting threading to work properly is easier, and threading settings
- // can be customzied by each user.
- // - "Reply All" no longer spams all other users.
- // - Required if private reply-to addresses are configured.
- // - Mails are sent in the language of user preference.
- //
- // In the code, splitting one outbound email into one-per-recipient is
- // sometimes referred to as "multiplexing".
- 'metamta.one-mail-per-recipient' => true,
-
- // When sending a message that has no To recipient (i.e. all recipients
- // are CC'd, for example when multiplexing mail), set the To field to the
- // following value. If no value is set, messages with no To will have
- // their CCs upgraded to To.
- 'metamta.placeholder-to-recipient' => null,
-
- // When a user takes an action which generates an email notification (like
- // commenting on a Differential revision), Phabricator can either send that
- // mail "From" the user's email address (like "alincoln@logcabin.com") or
- // "From" the 'metamta.default-address' address. The user experience is
- // generally better if Phabricator uses the user's real address as the "From"
- // since the messages are easier to organize when they appear in mail clients,
- // but this will only work if the server is authorized to send email on behalf
- // of the "From" domain. Practically, this means:
- // - If you are doing an install for Example Corp and all the users will
- // have corporate @corp.example.com addresses and any hosts Phabricator
- // is running on are authorized to send email from corp.example.com,
- // you can enable this to make the user experience a little better.
- // - If you are doing an install for an open source project and your
- // users will be registering via Facebook and using personal email
- // addresses, you MUST NOT enable this or virtually all of your outgoing
- // email will vanish into SFP blackholes.
- // - If your install is anything else, you're much safer leaving this
- // off since the risk in turning it on is that your outgoing mail will
- // mostly never arrive.
- 'metamta.can-send-as-user' => false,
-
- // Limit the maximum size of the body of an email generated for a diff
- // (in bytes).
- 'metamta.email-body-limit' => 524288,
-
- // Adapter class to use to transmit mail to the MTA. The default uses
- // PHPMailerLite, which will invoke "sendmail". This is appropriate
- // if sendmail actually works on your host, but if you haven't configured mail
- // it may not be so great. A number of other mailers are available (e.g., SES,
- // SendGrid, SMTP, custom mailers), consult "Configuring Outbound Email" in
- // the documentation for details.
- 'metamta.mail-adapter' =>
- 'PhabricatorMailImplementationPHPMailerLiteAdapter',
-
- // When email is sent, what format should Phabricator use for user's
- // email addresses? Valid values are:
- // - 'short' - 'gwashington <gwashington@example.com>'
- // - 'real' - 'George Washington <gwashington@example.com>'
- // - 'full' - 'gwashington (George Washington) <gwashington@example.com>'
- // The default is 'full'.
- 'metamta.user-address-format' => 'full',
-
- // If you're using PHPMailer to send email, provide the mailer and options
- // here. PHPMailer is much more enormous than PHPMailerLite, and provides more
- // mailers and greater enormity. You need it when you want to use SMTP
- // instead of sendmail as the mailer.
- 'phpmailer.mailer' => 'smtp',
- 'phpmailer.smtp-host' => '',
- 'phpmailer.smtp-port' => 25,
-
- // When using PHPMailer with SMTP, you can set this to one of "tls" or "ssl"
- // to use TLS or SSL. Leave it blank for vanilla SMTP. If you're sending
- // via Gmail, set it to "ssl".
- 'phpmailer.smtp-protocol' => '',
-
- // Set following if your smtp server requires authentication.
- 'phpmailer.smtp-user' => null,
- 'phpmailer.smtp-password' => null,
-
- // If you're using Amazon SES to send email, provide your AWS access key
- // and AWS secret key here. To set up Amazon SES with Phabricator, you need
- // to:
- // - Make sure 'metamta.mail-adapter' is set to:
- // "PhabricatorMailImplementationAmazonSESAdapter"
- // - Make sure 'metamta.can-send-as-user' is false.
- // - Make sure 'metamta.default-address' is configured to something sensible.
- // - Make sure 'metamta.default-address' is a validated SES "From" address.
- 'amazon-ses.access-key' => null,
- 'amazon-ses.secret-key' => null,
-
- // If you're using Sendgrid to send email, provide your access credentials
- // here. This will use the REST API. You can also use Sendgrid as a normal
- // SMTP service.
- 'sendgrid.api-user' => null,
- 'sendgrid.api-key' => null,
-
- // You can configure a reply handler domain so that email sent from Maniphest
- // will have a special "Reply To" address like "T123+82+af19f@example.com"
- // that allows recipients to reply by email and interact with tasks. For
- // instructions on configurating reply handlers, see the article
- // "Configuring Inbound Email" in the Phabricator documentation. By default,
- // this is set to 'null' and Phabricator will use a generic 'noreply@' address
- // or the address of the acting user instead of a special reply handler
- // address (see 'metamta.default-address'). If you set a domain here,
- // Phabricator will begin generating private reply handler addresses. See
- // also 'metamta.maniphest.reply-handler' to further configure behavior.
- // This key should be set to the domain part after the @, like "example.com".
- 'metamta.maniphest.reply-handler-domain' => null,
-
- // You can follow the instructions in "Configuring Inbound Email" in the
- // Phabricator documentation and set 'metamta.maniphest.reply-handler-domain'
- // to support updating Maniphest tasks by email. If you want more advanced
- // customization than this provides, you can override the reply handler
- // class with an implementation of your own. This will allow you to do things
- // like have a single public reply handler or change how private reply
- // handlers are generated and validated.
- //
- // This key should be set to a loadable subclass of
- // PhabricatorMailReplyHandler.
- 'metamta.maniphest.reply-handler' => 'ManiphestReplyHandler',
-
- // If you don't want phabricator to take up an entire domain
- // (or subdomain for that matter), you can use this and set a common
- // prefix for mail sent by phabricator. It will make use of the fact that
- // a mail-address such as phabricator+D123+1hjk213h@example.com will be
- // delivered to the phabricator users mailbox.
- // Set this to the left part of the email address and it well get
- // prepended to all outgoing mail. If you want to use e.g.
- // 'phabricator@example.com' this should be set to 'phabricator'.
- 'metamta.single-reply-handler-prefix' => null,
-
- // Prefix prepended to mail sent by Maniphest. You can change this to
- // distinguish between testing and development installs, for example.
- 'metamta.maniphest.subject-prefix' => '[Maniphest]',
-
- // See 'metamta.maniphest.reply-handler-domain'. This does the same thing, but
- // affects Pholio.
- 'metamta.pholio.reply-handler-domain' => null,
-
- // Prefix prepended to mail sent by Pholio.
- 'metamta.pholio.subject-prefix' => '[Pholio]',
-
- // See 'metamta.maniphest.reply-handler-domain'. This does the same thing, but
- // affects Macro.
- 'metamta.macro.reply-handler-domain' => null,
-
- // Prefix prepended to mail sent by Macro.
- 'metamta.macro.subject-prefix' => '[Macro]',
-
- // See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
- // but allows email replies via Differential.
- 'metamta.differential.reply-handler-domain' => null,
-
- // See 'metamta.maniphest.reply-handler'. This does the same thing, but
- // affects Differential.
- 'metamta.differential.reply-handler' => 'DifferentialReplyHandler',
-
- // Prefix prepended to mail sent by Differential.
- 'metamta.differential.subject-prefix' => '[Differential]',
-
- // Set this to true if you want patches to be attached to mail from
- // Differential. This won't work if you are using SendGrid as your mail
- // adapter.
- 'metamta.differential.attach-patches' => false,
-
- // To include patches in email bodies, set this to a positive integer. Patches
- // will be inlined if they are at most that many lines. For instance, a value
- // of 100 means "inline patches if they are no longer than 100 lines". By
- // default, patches are not inlined.
- 'metamta.differential.inline-patches' => 0,
-
- // If you enable either of the options above, you can choose what format
- // patches are sent in. Valid options are 'unified' (like diff -u) or 'git'.
- 'metamta.differential.patch-format' => 'unified',
-
- // Enables a different format for comments in differential emails.
- // Differential will create unified diffs around the comment, which
- // will give enough context for people who are only viewing the
- // reviews in email to understand what is going on. The context will
- // be created based on the range of the comment.
- 'metamta.differential.unified-comment-context' => false,
-
- // Prefix prepended to mail sent by Diffusion.
- 'metamta.diffusion.subject-prefix' => '[Diffusion]',
-
- // See 'metamta.maniphest.reply-handler-domain'. This does the same thing,
- // but allows email replies via Diffusion.
- 'metamta.diffusion.reply-handler-domain' => null,
-
- // See 'metamta.maniphest.reply-handler'. This does the same thing, but
- // affects Diffusion.
- 'metamta.diffusion.reply-handler' => 'PhabricatorAuditReplyHandler',
-
- // Set this to true if you want patches to be attached to commit notifications
- // from Diffusion. This won't work with SendGrid.
- 'metamta.diffusion.attach-patches' => false,
-
- // To include patches in Diffusion email bodies, set this to a positive
- // integer. Patches will be inlined if they are at most that many lines.
- // By default, patches are not inlined.
- 'metamta.diffusion.inline-patches' => 0,
-
- // If you've enabled attached patches or inline patches for commit emails, you
- // can establish a hard byte limit on their size. You should generally set
- // reasonable byte and time limits (defaults are 1MB and 60 seconds) to avoid
- // sending ridiculously enormous email for changes like "importing an external
- // library" or "accidentally committed this full-length movie as text".
- 'metamta.diffusion.byte-limit' => 1024 * 1024,
-
- // If you've enabled attached patches or inline patches for commit emails, you
- // can establish a hard time limit on generating them.
- 'metamta.diffusion.time-limit' => 60,
-
- // Prefix prepended to mail sent by Package.
- 'metamta.package.subject-prefix' => '[Package]',
-
- // See 'metamta.maniphest.reply-handler'. This does similar thing for package
- // except that it only supports sending out mail and doesn't handle incoming
- // email.
- 'metamta.package.reply-handler' => 'OwnersPackageReplyHandler',
-
- // By default, Phabricator generates unique reply-to addresses and sends a
- // separate email to each recipient when you enable reply handling. This is
- // more secure than using "From" to establish user identity, but can mean
- // users may receive multiple emails when they are on mailing lists. Instead,
- // you can use a single, non-unique reply to address and authenticate users
- // based on the "From" address by setting this to 'true'. This trades away
- // a little bit of security for convenience, but it's reasonable in many
- // installs. Object interactions are still protected using hashes in the
- // single public email address, so objects can not be replied to blindly.
- 'metamta.public-replies' => false,
-
- // You can configure an email address like "bugs@phabricator.example.com"
- // which will automatically create Maniphest tasks when users send email
- // to it. This relies on the "From" address to authenticate users, so it is
- // is not completely secure. To set this up, enter a complete email
- // address like "bugs@phabricator.example.com" and then configure mail to
- // that address so it routed to Phabricator (if you've already configured
- // reply handlers, you're probably already done). See "Configuring Inbound
- // Email" in the documentation for more information.
- 'metamta.maniphest.public-create-email' => null,
-
- // If you enable 'metamta.public-replies', Phabricator uses "From" to
- // authenticate users. You can additionally enable this setting to try to
- // authenticate with 'Reply-To'. Note that this is completely spoofable and
- // insecure (any user can set any 'Reply-To' address) but depending on the
- // nature of your install or other deliverability conditions this might be
- // okay. Generally, you can't do much more by spoofing Reply-To than be
- // annoying (you can write but not read content). But, you know, this is
- // still **COMPLETELY INSECURE**.
- 'metamta.insecure-auth-with-reply-to' => false,
-
- // If you enable 'metamta.maniphest.public-create-email' and create an
- // email address like "bugs@phabricator.example.com", it will default to
- // rejecting mail which doesn't come from a known user. However, you might
- // want to let anyone send email to this address; to do so, set a default
- // author here (a Phabricator username). A typical use of this might be to
- // create a "System Agent" user called "bugs" and use that name here. If you
- // specify a valid username, mail will always be accepted and used to create
- // a task, even if the sender is not a system user. The original email
- // address will be stored in an 'From Email' field on the task.
- 'metamta.maniphest.default-public-author' => null,
-
- 'metamta.herald.show-hints' => true,
-
- // You can disable the hints under "REPLY HANDLER ACTIONS" if users prefer
- // smaller messages. The actions themselves will still work properly.
- 'metamta.reply.show-hints' => true,
-
- // You can disable the "To:" and "Cc:" footers in mail if users prefer
- // smaller messages.
- 'metamta.recipients.show-hints' => true,
-
- // If this option is enabled, Phabricator will add a "Precedence: bulk"
- // header to transactional mail (e.g., Differential, Maniphest and Herald
- // notifications). This may improve the behavior of some auto-responder
- // software and prevent it from replying. However, it may also cause
- // deliverability issues -- notably, you currently can not send this header
- // via Amazon SES, and enabling this option with SES will prevent delivery
- // of any affected mail.
- 'metamta.precedence-bulk' => false,
-
- // Mail.app on OS X Lion won't respect threading headers unless the subject
- // is prefixed with "Re:". If you enable this option, Phabricator will add
- // "Re:" to the subject line of all mail which is expected to thread. If
- // you've set 'metamta.one-mail-per-recipient', users can override this
- // setting in their preferences.
- 'metamta.re-prefix' => false,
-
- // If true, allow MetaMTA to change mail subjects to put text like
- // '[Accepted]' and '[Commented]' in them. This makes subjects more useful,
- // but might break threading on some clients. If you've set
- // 'metamta.one-mail-per-recipient', users can override this setting in their
- // preferences.
- 'metamta.vary-subjects' => true,
-
-// -- Auth ------------------------------------------------------------------ //
-
- // If true, email addresses must be verified (by clicking a link in an
- // email) before a user can login. By default, verification is optional
- // unless 'auth.email-domains' is nonempty (see below).
- 'auth.require-email-verification' => false,
-
- // You can restrict allowed email addresses to certain domains (like
- // "yourcompany.com") by setting a list of allowed domains here. Users will
- // only be allowed to register using email addresses at one of the domains,
- // and will only be able to add new email addresses for these domains. If
- // you configure this, it implies 'auth.require-email-verification'.
- //
- // To configure email domains, set a list of domains like this:
- //
- // array(
- // 'yourcompany.com',
- // 'yourcompany.co.uk',
- // )
- //
- // You should omit the "@" from domains. Note that the domain must match
- // exactly. If you allow "yourcompany.com", that permits "joe@yourcompany.com"
- // but rejects "joe@mail.yourcompany.com".
- 'auth.email-domains' => array(),
-
- // You can provide an arbitrary block of HTML here, which will appear on the
- // login screen. Normally, you'd use this to provide login or registration
- // instructions to users.
- 'auth.login-message' => null,
-
-
-// -- Accounts -------------------------------------------------------------- //
-
- // Is basic account information (email, real name, profile picture) editable?
- // If you set up Phabricator to automatically synchronize account information
- // from some other authoritative system, you can disable this to ensure
- // information remains consistent across both systems.
- 'account.editable' => true,
-
- // When users set or reset a password, it must have at least this many
- // characters.
- 'account.minimum-password-length' => 8,
-
-
-// -- Recaptcha ------------------------------------------------------------- //
-
- // Is Recaptcha enabled? If disabled, captchas will not appear. You should
- // enable Recaptcha if your install is public-facing, as it hinders
- // brute-force attacks.
- 'recaptcha.enabled' => false,
-
- // Your Recaptcha public key, obtained from Recaptcha.
- 'recaptcha.public-key' => null,
-
- // Your Recaptcha private key, obtained from Recaptcha.
- 'recaptcha.private-key' => null,
-
-
-// -- Misc ------------------------------------------------------------------ //
-
- // This is hashed with other inputs to generate CSRF tokens. If you want, you
- // can change it to some other string which is unique to your install. This
- // will make your install more secure in a vague, mostly theoretical way. But
- // it will take you like 3 seconds of mashing on your keyboard to set it up so
- // you might as well.
- 'phabricator.csrf-key' => '0b7ec0592e0a2829d8b71df2fa269b2c6172eca3',
-
- // This is hashed with other inputs to generate mail tokens. If you want, you
- // can change it to some other string which is unique to your install. In
- // particular, you will want to do this if you accidentally send a bunch of
- // mail somewhere you shouldn't have, to invalidate all old reply-to
- // addresses.
- 'phabricator.mail-key' => '5ce3e7e8787f6e40dfae861da315a5cdf1018f12',
-
-
- // PHP requires that you set a timezone in your php.ini before using date
- // functions, or it will emit a warning. If this isn't possible (for instance,
- // because you are using HPHP) you can set some valid constant for
- // date_default_timezone_set() here and Phabricator will set it on your
- // behalf, silencing the warning.
- 'phabricator.timezone' => null,
-
- // Show stack traces when unhandled exceptions occur, force reloading of
- // static resources (skipping the cache), show an error callout if a page
- // generated PHP errors, warnings, or notices, force disk reads when
- // reloading, and generally make development easier. This option should not
- // be enabled in production.
- 'phabricator.developer-mode' => false,
-
- // Contains a list of uninstalled applications
- 'phabricator.uninstalled-applications' => array(),
-
- // Allowing non-members to interact with tasks over email.
- 'phabricator.allow-email-users' => false,
-
-// -- Welcome Screen -------------------------------------------------------- //
-
- // The custom HTML content for the Phabricator welcome screen.
- 'welcome.html' => null,
-
-// -- Files ----------------------------------------------------------------- //
-
- // Lists which uploaded file types may be viewed in the browser. If a file
- // has a mime type which does not appear in this list, it will always be
- // downloaded instead of displayed. This is mainly a usability
- // consideration, since browsers tend to freak out when viewing enormous
- // binary files.
- //
- // The keys in this array are viewable mime types; the values are the mime
- // types they will be delivered as when they are viewed in the browser.
- //
- // IMPORTANT: Configure 'security.alternate-file-domain' above! Your install
- // is NOT safe if it is left unconfigured.
- 'files.viewable-mime-types' => array(
- 'image/jpeg' => 'image/jpeg',
- 'image/jpg' => 'image/jpg',
- 'image/png' => 'image/png',
- 'image/gif' => 'image/gif',
- 'text/plain' => 'text/plain; charset=utf-8',
- 'text/x-diff' => 'text/plain; charset=utf-8',
-
- // ".ico" favicon files, which have mime type diversity. See:
- // http://en.wikipedia.org/wiki/ICO_(file_format)#MIME_type
- 'image/x-ico' => 'image/x-icon',
- 'image/x-icon' => 'image/x-icon',
- 'image/vnd.microsoft.icon' => 'image/x-icon',
- ),
-
- // List of mime types which can be used as the source for an <img /> tag.
- // This should be a subset of 'files.viewable-mime-types' and exclude files
- // like text.
- 'files.image-mime-types' => array(
- 'image/jpeg' => true,
- 'image/jpg' => true,
- 'image/png' => true,
- 'image/gif' => true,
- 'image/x-ico' => true,
- 'image/x-icon' => true,
- 'image/vnd.microsoft.icon' => true,
- ),
-
- // Configuration option for enabling imagemagick
- // to resize animated profile pictures (gif)
- 'files.enable-imagemagick' => false,
-
-// -- Storage --------------------------------------------------------------- //
-
- // Phabricator allows users to upload files, and can keep them in various
- // storage engines. This section allows you to configure which engines
- // Phabricator will use, and how it will use them.
-
- // The largest filesize Phabricator will store in the MySQL BLOB storage
- // engine, which just uses a database table to store files. While this isn't a
- // best practice, it's really easy to set up. Set this to 0 to disable use of
- // the MySQL blob engine.
- 'storage.mysql-engine.max-size' => 1000000,
-
- // Phabricator provides a local disk storage engine, which just writes files
- // to some directory on local disk. The webserver must have read/write
- // permissions on this directory. This is straightforward and suitable for
- // most installs, but will not scale past one web frontend unless the path
- // is actually an NFS mount, since you'll end up with some of the files
- // written to each web frontend and no way for them to share. To use the
- // local disk storage engine, specify the path to a directory here. To
- // disable it, specify null.
- 'storage.local-disk.path' => null,
-
- // If you want to store files in Amazon S3, specify an AWS access and secret
- // key here and a bucket name below.
- 'amazon-s3.access-key' => null,
- 'amazon-s3.secret-key' => null,
-
- // To use a custom endpoint, specify it here. Normally, you do not need to
- // configure this.
- 'amazon-s3.endpoint' => null,
-
- // Set this to a valid Amazon S3 bucket to store files there. You must also
- // configure S3 access keys above.
- 'storage.s3.bucket' => null,
-
- // Phabricator uses a storage engine selector to choose which storage engine
- // to use when writing file data. If you add new storage engines or want to
- // provide very custom rules (e.g., write images to one storage engine and
- // other files to a different one), you can provide an alternate
- // implementation here. The default engine will use choose MySQL, Local Disk,
- // and S3, in that order, if they have valid configurations above and a file
- // fits within configured limits.
- 'storage.engine-selector' => 'PhabricatorDefaultFileStorageEngineSelector',
-
- // Set the size of the largest file a user may upload. This is used to render
- // text like "Maximum file size: 10MB" on interfaces where users can upload
- // files, and files larger than this size will be rejected.
- //
- // Specify this limit in bytes, or using a "K", "M", or "G" suffix.
- //
- // NOTE: Setting this to a large size is NOT sufficient to allow users to
- // upload large files. You must also configure a number of other settings. To
- // configure file upload limits, consult the article "Configuring File Upload
- // Limits" in the documentation. Once you've configured some limit across all
- // levels of the server, you can set this limit to an appropriate value and
- // the UI will then reflect the actual configured limit.
- 'storage.upload-size-limit' => null,
-
- // Phabricator puts databases in a namespace, which defualts to "phabricator"
- // -- for instance, the Differential database is named
- // "phabricator_differential" by default. You can change this namespace if you
- // want. Normally, you should not do this unless you are developing
- // Phabricator and using namespaces to separate multiple sandbox datasets.
- 'storage.default-namespace' => 'phabricator',
-
-
-// -- Search ---------------------------------------------------------------- //
-
- // Phabricator supports Elastic Search; to use it, specify a host like
- // 'http://elastic.example.com:9200/' here.
- 'search.elastic.host' => null,
-
- // Phabricator uses a search engine selector to choose which search engine
- // to use when indexing and reconstructing documents, and when executing
- // queries. You can override the engine selector to provide a new selector
- // class which can select some custom engine you implement, if you want to
- // store your documents in some search engine which does not have default
- // support.
- 'search.engine-selector' => 'PhabricatorDefaultSearchEngineSelector',
-
-
-// -- Differential ---------------------------------------------------------- //
-
- // List of file regexps where whitespace is meaningful and should not
- // use 'ignore-all' by default
- 'differential.whitespace-matters' => array(
- '/\.py$/',
- '/\.l?hs$/',
- ),
-
- // Differential has a required "Test Plan" field by default. You can make it
- // optional by setting this to false. You can also completely remove it above,
- // if you prefer.
- 'differential.require-test-plan-field' => true,
-
- // If you set this to true, users can "!accept" revisions via email (normally,
- // they can take other actions but can not "!accept"). This action is disabled
- // by default because email authentication can be configured to be very weak,
- // and, socially, email "!accept" is kind of sketchy and implies revisions may
- // not actually be receiving thorough review.
- 'differential.enable-email-accept' => false,
-
- // List of file regexps that should be treated as if they are generated by
- // an automatic process, and thus get hidden by default in differential.
- 'differential.generated-paths' => array(
- // '/config\.h$/',
- // '#/autobuilt/#',
- ),
-
- // If you set this to true, users can accept their own revisions. This action
- // is disabled by default because it's most likely not a behavior you want,
- // but it proves useful if you are working alone on a project and want to make
- // use of all of differential's features.
- 'differential.allow-self-accept' => false,
-
- // If you set this to true, any user can close any revision so long as it has
- // been accepted. This can be useful depending on your development model. For
- // example, github-style pull requests where the reviewer is often the
- // actual committer can benefit from turning this option to true. If false,
- // only the submitter can close a revision.
- 'differential.always-allow-close' => false,
-
- // If you set this to true, any user can abandon any revision. If false, only
- // the submitter can abandon a revision.
- 'differential.always-allow-abandon' => false,
-
- // If you set this to true, any user can reopen a revision so long as it has
- // been closed. This can be useful if a revision is accidentally closed or
- // if a developer changes his or her mind after closing a revision. If it is
- // false, reopening is not allowed.
- 'differential.allow-reopen' => false,
-
- // Revisions newer than this number of days are marked as fresh in Action
- // Required and Revisions Waiting on You views. Only work days (not weekends
- // and holidays) are included. Set to 0 to disable this feature.
- 'differential.days-fresh' => 1,
-
- // Similar to 'differential.days-fresh' but marks stale revisions. If the
- // revision is even older than it is marked as old.
- 'differential.days-stale' => 3,
-
-// -- Repositories ---------------------------------------------------------- //
-
- // The default location in which to store local copies of repositories.
- // Anything stored in this directory will be assumed to be under the
- // control of phabricator, which means that Phabricator will try to do some
- // maintenance on working copies if there are problems (such as a change
- // to the remote origin url). This maintenance may include completely
- // removing (and recloning) anything in this directory.
- //
- // When set to null, this option is ignored (i.e. Phabricator will not fully
- // control any working copies).
- 'repository.default-local-path' => null,
-
-// -- Maniphest ------------------------------------------------------------- //
-
- // What should the default task priority be in create flows?
- // See the constants in @{class:ManiphestTaskPriority} for valid values.
- // Defaults to "needs triage".
- 'maniphest.default-priority' => 90,
-
-// -- Phame ----------------------------------------------------------------- //
-
- // Should Phame users have Disqus comment widget, and if so what's the
- // website shortname to use? For example, secure.phabricator.org uses
- // "phabricator", which we registered with Disqus. If you aren't familiar
- // with Disqus, see:
- // Disqus quick start guide - http://docs.disqus.com/help/4/
- // Information on shortnames - http://docs.disqus.com/help/68/
- 'disqus.shortname' => null,
-
- // Directories to look for Phame skins inside of.
- 'phame.skins' => array(
- 'externals/skins/',
- ),
-
-// -- Remarkup -------------------------------------------------------------- //
-
- // If you enable this, linked YouTube videos will be embeded inline. This has
- // mild security implications (you'll leak referrers to YouTube) and is pretty
- // silly (but sort of awesome).
- 'remarkup.enable-embedded-youtube' => false,
-
-
-// -- Cache ----------------------------------------------------------------- //
-
- // Set this to false to disable the use of gzdeflate()-based compression in
- // some caches. This may give you less performant (but more debuggable)
- // caching.
- 'cache.enable-deflate' => true,
-
-// -- Garbage Collection ---------------------------------------------------- //
-
- // Phabricator generates various logs and caches in the database which can
- // be garbage collected after a while to make the total data size more
- // manageable. To run garbage collection, launch a
- // PhabricatorGarbageCollector daemon.
-
- // These 'ttl' keys configure how much old data the GC daemon keeps around.
- // Objects older than the ttl will be collected. Set any value to 0 to store
- // data indefinitely.
-
- 'gcdaemon.ttl.herald-transcripts' => 30 * (24 * 60 * 60),
- 'gcdaemon.ttl.daemon-logs' => 7 * (24 * 60 * 60),
- 'gcdaemon.ttl.differential-parse-cache' => 14 * (24 * 60 * 60),
- 'gcdaemon.ttl.markup-cache' => 30 * (24 * 60 * 60),
- 'gcdaemon.ttl.task-archive' => 14 * (24 * 60 * 60),
- 'gcdaemon.ttl.general-cache' => 30 * (24 * 60 * 60),
-
-
-// -- Feed ------------------------------------------------------------------ //
-
- // If you set this to true, you can embed Phabricator activity feeds in other
- // pages using iframes. These feeds are completely public, and a login is not
- // required to view them! This is intended for things like open source
- // projects that want to expose an activity feed on the project homepage.
- //
- // NOTE: You must also set `policy.allow-public` to true for this setting
- // to work properly.
- 'feed.public' => false,
-
- // If you set this to a list of http URIs, when a feed story is published a
- // task will be created for each uri that posts the story data to the uri.
- // Daemons automagically retry failures 100 times, waiting $fail_count * 60s
- // between each subsequent failure. Be sure to keep the daemon console
- // (/daemon/) open while developing and testing your end points. You may need
- // to restart your daemons to start sending http requests.
- //
- // NOTE: URIs are not validated, the URI must return http status 200 within
- // 30 seconds, and no permission checks are performed.
- 'feed.http-hooks' => array(),
-
-// -- Drydock --------------------------------------------------------------- //
-
- // If you want to use Drydock's builtin EC2 Blueprints, configure your AWS
- // EC2 credentials here.
- 'amazon-ec2.access-key' => null,
- 'amazon-ec2.secret-key' => null,
-
-
-// -- Customization --------------------------------------------------------- //
-
- // Paths to additional phutil libraries to load.
- 'load-libraries' => array(),
-
- 'aphront.default-application-configuration-class' =>
- 'AphrontDefaultApplicationConfiguration',
-
- // Directory that phd (the Phabricator daemon control script) should use to
- // track running daemons.
- 'phd.pid-directory' => '/var/tmp/phd/pid',
-
- // Directory that the Phabricator daemons should use to store the log file
- 'phd.log-directory' => '/var/tmp/phd/log',
-
- // Number of "TaskMaster" daemons that "phd start" should start. You can
- // raise this if you have a task backlog, or explicitly launch more with
- // "phd launch <N> taskmaster".
- 'phd.start-taskmasters' => 4,
-
- // Launch daemons in "verbose" mode by default. This creates a lot of output,
- // but can help debug issues. Daemons launched in debug mode with "phd debug"
- // are always launched in verbose mode. See also 'phd.trace'.
- 'phd.verbose' => false,
-
- // Launch daemons in "trace" mode by default. This creates an ENORMOUS amount
- // of output, but can help debug issues. Daemons launched in debug mode with
- // "phd debug" are always launched in trace mdoe. See also 'phd.verbose'.
- 'phd.trace' => false,
-
- // This value is an input to the hash function when building resource hashes.
- // It has no security value, but if you accidentally poison user caches (by
- // pushing a bad patch or having something go wrong with a CDN, e.g.) you can
- // change this to something else and rebuild the Celerity map to break user
- // caches. Unless you are doing Celerity development, it is exceptionally
- // unlikely that you need to modify this.
- 'celerity.resource-hash' => 'd9455ea150622ee044f7931dabfa52aa',
-
- // Minify static resources by removing whitespace and comments. You should
- // enable this in production, but disable it in development.
- 'celerity.minify' => true,
-
- // You can respond to various application events by installing listeners,
- // which will receive callbacks when interesting things occur. Specify a list
- // of classes which extend PhabricatorEventListener here.
- 'events.listeners' => array(),
-
-// -- Syntax Highlighting --------------------------------------------------- //
-
- // Phabricator can highlight PHP by default and use Pygments for other
- // languages if enabled. You can provide a custom highlighter engine by
- // extending class PhutilSyntaxHighlighterEngine.
- 'syntax-highlighter.engine' => 'PhutilDefaultSyntaxHighlighterEngine',
-
- // If you want syntax highlighting for other languages than PHP then you can
- // install the python package 'Pygments', make sure the 'pygmentize' script is
- // available in the $PATH of the webserver, and then enable this.
- 'pygments.enabled' => false,
-
- // In places that we display a dropdown to syntax-highlight code,
- // this is where that list is defined.
- // Syntax is 'lexer-name' => 'Display Name',
- 'pygments.dropdown-choices' => array(
- 'apacheconf' => 'Apache Configuration',
- 'bash' => 'Bash Scripting',
- 'brainfuck' => 'Brainf*ck',
- 'c' => 'C',
- 'coffee-script' => 'CoffeeScript',
- 'cpp' => 'C++',
- 'css' => 'CSS',
- 'd' => 'D',
- 'diff' => 'Diff',
- 'django' => 'Django Templating',
- 'erb' => 'Embedded Ruby/ERB',
- 'erlang' => 'Erlang',
- 'go' => 'Golang',
- 'groovy' => 'Groovy',
- 'haskell' => 'Haskell',
- 'html' => 'HTML',
- 'java' => 'Java',
- 'js' => 'Javascript',
- 'json' => 'JSON',
- 'mysql' => 'MySQL',
- 'objc' => 'Objective-C',
- 'perl' => 'Perl',
- 'php' => 'PHP',
- 'puppet' => 'Puppet',
- 'rest' => 'reStructuredText',
- 'text' => 'Plain Text',
- 'python' => 'Python',
- 'rainbow' => 'Rainbow',
- 'remarkup' => 'Remarkup',
- 'ruby' => 'Ruby',
- 'xml' => 'XML',
- 'yaml' => 'YAML',
- ),
-
- // This is an override list of regular expressions which allows you to choose
- // what language files are highlighted as. If your projects have certain rules
- // about filenames or use unusual or ambiguous language extensions, you can
- // create a mapping here. This is an ordered dictionary of regular expressions
- // which will be tested against the filename. They should map to either an
- // explicit language as a string value, or a numeric index into the captured
- // groups as an integer.
- 'syntax.filemap' => array(
- // Example: Treat all '*.xyz' files as PHP.
- // '@\\.xyz$@' => 'php',
-
- // Example: Treat 'httpd.conf' as 'apacheconf'.
- // '@/httpd\\.conf$@' => 'apacheconf',
-
- // Example: Treat all '*.x.bak' file as '.x'. NOTE: we map to capturing
- // group 1 by specifying the mapping as "1".
- // '@\\.([^.]+)\\.bak$@' => 1,
-
- '@\.arcconfig$@' => 'js',
- '@\.arclint$@' => 'js',
- '@\.divinerconfig$@' => 'js',
- ),
-
- // Set the default monospaced font style for users who haven't set a custom
- // style.
- 'style.monospace' => '10px "Menlo", "Consolas", "Monaco", monospace',
- 'style.monospace.windows' => '11px "Menlo", "Consolas", "Monaco", monospace',
-
-
-// -- Debugging ------------------------------------------------------------- //
-
- // Enable this to change HTTP redirects into normal pages with a link to the
- // redirection target. For example, after you submit a form you'll get a page
- // saying "normally, you'd be redirected...". This is useful to examine
- // service or profiler information on write pathways, or debug redirects. It
- // also makes the UX horrible for normal use, so you should enable it only
- // when debugging.
- //
- // NOTE: This does not currently work for forms with Javascript "workflow",
- // since the redirect happens in Javascript.
- 'debug.stop-on-redirect' => false,
-
- // Set the rate for how often to do sampled profiling. On average, one
- // request for every number of requests specified here will be sampled.
- // Set this value to 0 to completely disable profiling. In a production
- // environment, this value should either be set to 0 (to disable) or to
- // a large number (to sample only a few requests).
- 'debug.profile-rate' => 0,
-
-// -- Environment ---------------------------------------------------------- //
-
- // Phabricator occasionally shells out to other binaries on the server.
- // An example of this is the "pygmentize" command, used to syntax-highlight
- // code written in languages other than PHP. By default, it is assumed that
- // these binaries are in the $PATH of the user running Phabricator (normally
- // 'apache', 'httpd', or 'nobody'). Here you can add extra directories to
- // the $PATH environment variable, for when these binaries are in non-standard
- // locations.
- 'environment.append-paths' => array(),
-
-// -- Audit ---------------------------------------------------------- //
-
- // Controls whether or not task creator can Close Audits
- 'audit.can-author-close-audit' => false,
-);
diff --git a/conf/development.conf.php b/conf/development.conf.php
deleted file mode 100644
--- a/conf/development.conf.php
+++ /dev/null
@@ -1,9 +0,0 @@
-<?php
-
-return array(
-
- 'phabricator.developer-mode' => true,
- 'darkconsole.enabled' => true,
- 'celerity.minify' => false,
-
-) + phabricator_read_config_file('default');
diff --git a/conf/production.conf.php b/conf/production.conf.php
deleted file mode 100644
--- a/conf/production.conf.php
+++ /dev/null
@@ -1,5 +0,0 @@
-<?php
-
-return array(
-
-) + phabricator_read_config_file('default');

File Metadata

Mime Type
text/plain
Expires
Sep 12 2025, 11:52 PM (6 w, 4 d ago)
Storage Engine
amazon-s3
Storage Format
Encrypted (AES-256-CBC)
Storage Handle
phabricator/secure/k2/7i/ll5x3ieawgy262o2
Default Alt Text
D10628.diff (52 KB)

Event Timeline

Phabricator · Built by Phacility