Differential D15817 Diff 38099 src/docs/user/userguide/diffusion_uris.diviner

Changeset View

Standalone View

src/docs/user/userguide/diffusion_uris.diviner

	@title Diffusion User Guide: URIs			@title Diffusion User Guide: URIs
	@group userguide			@group userguide

	Guide to configuring repository URIs for fetching, cloning and mirroring.			Guide to configuring repository URIs for fetching, cloning and mirroring.

	Overview			Overview
	========			========

	WARNING: This document describes a feature which is still under development,			WARNING: This document describes a feature which is still under development,
	and is not necessarily accurate or complete.			and is not necessarily accurate or complete.

	Phabricator can host, observe, mirror, and proxy repositories. For example,			Phabricator can create, host, observe, mirror, proxy, and import repositories.
	here are some supported use cases:			For example, you can:

	Host Repositories: Phabricator can host repositories locally. Phabricator			Host Repositories: Phabricator can host repositories locally. Phabricator
	maintains the writable master version of the repository, and you can push and			maintains the writable master version of the repository, and you can push and
	pull the repository. This is the most straightforward kind of repository			pull the repository. This is the most straightforward kind of repository
	configuration, and similar to repositories on other services like GitHub or			configuration, and similar to repositories on other services like GitHub or
	Bitbucket.			Bitbucket.

	Observe Repositories: Phabricator can create a copy of an repository which			Observe Repositories: Phabricator can create a copy of an repository which
	Show All 18 Lines
	You can also import repositories by creating an empty hosted repository and			You can also import repositories by creating an empty hosted repository and
	then pushing everything to the repository directly.			then pushing everything to the repository directly.

	You configure the behavior of a Phabricator repository by adding and			You configure the behavior of a Phabricator repository by adding and
	configuring URIs and marking them to be fetched from, mirrored to, clonable,			configuring URIs and marking them to be fetched from, mirrored to, clonable,
	and so on. By configuring all the URIs that a repository should interact with			and so on. By configuring all the URIs that a repository should interact with
	and expose to users, you configure the read, write, and mirroring behavior			and expose to users, you configure the read, write, and mirroring behavior
	of the repository.			of the repository.

				The remainder of this document walks through this configuration in greater
				detail.


				Host a Repository
				=================

				You can create new repositories that Phabricator will host, like you would
				create repositories on services like GitHub or Bitbucket. Phabricator will
				serve a read-write copy of the repository and you can clone it from Phabricator
				and push changes to Phabricator.

				If you haven't already, you may need to configure Phabricator for hosting
				before you can create your first hosted repository. For a detailed guide,
				see @{article:Diffusion User Guide: Repository Hosting}.

				This is the default mode for new repositories. To host a repository:

				- Create a new repository.
				- Activate it.

				Phabricator will create an empty repository and allow you to fetch from it and
				push to it.


				Observe a Repository
				====================

				If you have an existing repository hosted on another service (like GitHub,
				Bitbucket, or a private server) that you want to work with in Phabricator,
				you can configure Phabricator to observe it.

				When observing a repository, Phabricator will keep track of changes in the
				remote repository and allow you to browse and interact with the repository from
				the web UI in Diffusion and other applications, but you can continue hosting it
				elsewhere.

				To observe a repository:

				- Create a new repository, but don't activate it yet.
				scodeUnsubmitted Not Done Inline Actions FWIW, a pitfall we ran into was that during the initial import, unless you too steps to avoid it, the initial import generates email. We ended up disabling autoclose and notify/push during the initial import to avoid this. This may have been PEBKAC or a problem specific to us; I just thought I'd mention it in case it affects normal users and may be worth warning about here. scode: FWIW, a pitfall we ran into was that during the initial import, unless you too steps to avoid…
				eadlerUnsubmitted Not Done Inline Actions this is the documented reason for those knobs existing. T9554 is related. eadler: this is the documented reason for those knobs existing. T9554 is related.
				- Add the remote URI you want to observe as a repository URI.
				- Set the I/O Type for the URI to Observe.
				- If necessary, configure a credential.
				- Activate the repository.

				Phabricator will perform an initial import of the repository, creating a local
				read-only copy. Once this process completes, it will continue keeping track of
				changes in the remote, fetching them, and reflecting them in the UI.


				Mirror a Repository
				===================

				NOTE: Mirroring is not supported in Subversion.

				You can create a read-only mirror of an existing repository. Phabricator will
				push all changes made to the repository to the mirror.

				For example, if you have a repository hosted in Phabricator that you want to
				mirror to GitHub, you can configure Phabricator to automatically maintain the
				mirror. This is how the upstream repositories are set up.

				You can mirror any repository, even if Phabricator is only observing it and not
				hosting it directly.

				To begin mirroring a repository:

				- Create a hosted or observed repository by following the relevant
				instructions above.
				- Add the remote URI you want to mirror to as a repository URI.
				- Set the I/O Type for the URI to Mirror.
				- If necessary, configure a credential.

				To stop mirroring:

				- Disable the mirror URI; or
				- Change the I/O Type for the URI to None.


				Import a Repository
				===================

				If you have an existing repository that you want to move so it is hosted on
				Phabricator, there are three ways to do it:

				Push Everything: //(Git, Mercurial)// Create a new empty hosted repository
				according to the instructions above. Once the empty repository initializes,
				push your entire existing repository to it.

				Observe First: //(Git, Mercurial)// Observe the existing repository first,
				according to the instructions above. Once Phabricator's copy of the repository
				is fully synchronized, change the I/O Type for the Observe URI to
				None to stop fetching changes from the remote.

				By default, this will automatically make Phabricator's copy of the repository
				writable, and you can begin pushing to it. If you've adjusted URI
				configuration away from the defaults, you may need to set at least one URI
				to Read/Write mode so you can push to it.

				Copy on Disk: //(Git, Mercurial, Subversion)// Create a new empty hosted
				repository according to the instructions above, but do not activate it yet.

				Using the Storage tab, find the location of the repository's working copy
				on disk, and place a working copy of the repository you wish to import there.

				For Git and Mercurial, use a bare working copy for best results.

				This is the only way to import a Subversion repository because only the master
				copy of the repository has history.

				Once you've put a working copy in the right place on disk, activate the
				repository.


				Customizing Displayed Clone URIs
				================================

				If you have an unusual configuration and want the UI to offers users specific
				clone URIs other than the URIs that Phabricator serves or interacts with, you
				can add those URIs with the I/O Type set to None and then set their
				Display Type to Always.

				Likewise, you can set the Display Type of any URIs you do //not// want
				to be visible to Never.

				This allows you to precisely configure which clone URIs are shown to users for
				a repository.


				Reference: I/O Types
				====================

				This section details the available I/O Type options for URIs.

				Each repository has some builtin URIs. These are URIs hosted by Phabricator
				itself. The modes available for each URI depend primarily on whether it is a
				builtin URI or not.

				Default: This setting has Phabricator guess the correct option for the
				URI.

				For builtin URIs, the default behavior is //Read/Write// if the repository
				is hosted, and //Read-Only// if the repository is observed.

				For custom URIs, the default type is //None// because we can not automatically
				guess if you want to ignore, observe, or mirror a URI and //None// is the
				safest default.

				Observe: Phabricator will observe this repository and regularly fetch any
				changes made to it to a local read-only copy.

				You can not observe builtin URIs because reading a repository from itself
				does not make sense.

				You can not add a URI in Observe mode if an existing builtin URI is in
				//Read/Write// mode, because this would mean the repository had two different
				authorities: the observed remote copy and the hosted local copy. Take the
				other URI out of //Read/Write// mode first.

				Mirror: Phabricator will push any changes made to this repository to the
				remote URI, keeping a read-only mirror hosted at that URI up to date.

				This works for both observed and hosted repositories.

				This option is not available for builtin URIs because it does not make sense
				to mirror a repository to itself.

				It is possible to mirror a repository to another repository that is also
				hosted by Phabricator by adding that other repository's URI, although this is
				silly and probably very rarely of any use.

				None: Phabricator will not fetch changes from or push changes to this URI.
				For builtin URIs, it will not let users fetch changes from or push changes to
				this URI.

				You can use this mode to turn off an Observe URI after an import, stop a Mirror
				URI from updating, or to add URIs that you're only using to customize which
				clone URIs are displayed to the user but don't want Phabricator to interact
				with directly.

				Read Only: Phabricator will serve the repository from this URI in read-only
				mode. Users will be able to fetch from it but will not be able to push to it.

				Because Phabricator must be able to serve the repository from URIs configured
				in this mode, this option is only available for builtin URIs.

				Read/Write: Phabricator will serve the repository from this URI in
				read/write mode. Users will be able to fetch from it and push to it.

				URIs can not be set into this mode if another URI is set to //Observe// mode,
				because that would mean the repository had two different authorities: the
				observed remote copy and the hosted local copy. Take the other URI out of
				//Observe// mode first.

				Because Phabricator must be able to serve the repository from URIs configured
				in this mode, this option is only available for builtin URIs.


				Reference: Display Types
				========================

				This section details the available Display Type options for URIs.

				Default: Phabricator will guess the correct option for the URI. It
				guesses based on the configured I/O Type and whether the URI is
				builtin or not.

				For //Observe//, //Mirror// and //None// URIs, the default is //Never//.

				For builtin URIs in //Read Only// or //Read/Write// mode, the most
				human-readable URI defaults to //Always// and the others default to //Never//.

				Always: This URI will be shown to users as a clone/checkout URI. You can
				add URIs in this mode to cutomize exactly what users are shown.

				Never: This URI will not be shown to users. You can hide less-preferred
				URIs to guide users to the URIs they should be using to interact with the
				repository.


				Next Steps
				==========

				Continue by:

				- configuring Phabricator to host repositories with
				@{article:Diffusion User Guide: Repository Hosting}.