Page MenuHomePhabricator
Files F18749719

D14349.id.diff
No OneTemporary
Actions

D14349.id.diff
View Options

diff --git a/src/__phutil_library_map__.php b/src/__phutil_library_map__.php
--- a/src/__phutil_library_map__.php
+++ b/src/__phutil_library_map__.php
@@ -709,6 +709,7 @@
'DiffusionRepositoryRemarkupRule' => 'applications/diffusion/remarkup/DiffusionRepositoryRemarkupRule.php',
'DiffusionRepositorySymbolsController' => 'applications/diffusion/controller/DiffusionRepositorySymbolsController.php',
'DiffusionRepositoryTag' => 'applications/diffusion/data/DiffusionRepositoryTag.php',
+ 'DiffusionRepositoryTestAutomationController' => 'applications/diffusion/controller/DiffusionRepositoryTestAutomationController.php',
'DiffusionRequest' => 'applications/diffusion/request/DiffusionRequest.php',
'DiffusionResolveRefsConduitAPIMethod' => 'applications/diffusion/conduit/DiffusionResolveRefsConduitAPIMethod.php',
'DiffusionResolveUserQuery' => 'applications/diffusion/query/DiffusionResolveUserQuery.php',
@@ -909,6 +910,7 @@
'DrydockSlotLock' => 'applications/drydock/storage/DrydockSlotLock.php',
'DrydockSlotLockException' => 'applications/drydock/exception/DrydockSlotLockException.php',
'DrydockSlotLockFailureLogType' => 'applications/drydock/logtype/DrydockSlotLockFailureLogType.php',
+ 'DrydockTestRepositoryOperation' => 'applications/drydock/operation/DrydockTestRepositoryOperation.php',
'DrydockWebrootInterface' => 'applications/drydock/interface/webroot/DrydockWebrootInterface.php',
'DrydockWorker' => 'applications/drydock/worker/DrydockWorker.php',
'DrydockWorkingCopyBlueprintImplementation' => 'applications/drydock/blueprint/DrydockWorkingCopyBlueprintImplementation.php',
@@ -4465,6 +4467,7 @@
'DiffusionRepositoryRemarkupRule' => 'PhabricatorObjectRemarkupRule',
'DiffusionRepositorySymbolsController' => 'DiffusionRepositoryEditController',
'DiffusionRepositoryTag' => 'Phobject',
+ 'DiffusionRepositoryTestAutomationController' => 'DiffusionRepositoryEditController',
'DiffusionRequest' => 'Phobject',
'DiffusionResolveRefsConduitAPIMethod' => 'DiffusionQueryConduitAPIMethod',
'DiffusionResolveUserQuery' => 'Phobject',
@@ -4705,6 +4708,7 @@
'DrydockSlotLock' => 'DrydockDAO',
'DrydockSlotLockException' => 'Exception',
'DrydockSlotLockFailureLogType' => 'DrydockLogType',
+ 'DrydockTestRepositoryOperation' => 'DrydockRepositoryOperationType',
'DrydockWebrootInterface' => 'DrydockInterface',
'DrydockWorker' => 'PhabricatorWorker',
'DrydockWorkingCopyBlueprintImplementation' => 'DrydockBlueprintImplementation',
diff --git a/src/applications/diffusion/application/PhabricatorDiffusionApplication.php b/src/applications/diffusion/application/PhabricatorDiffusionApplication.php
--- a/src/applications/diffusion/application/PhabricatorDiffusionApplication.php
+++ b/src/applications/diffusion/application/PhabricatorDiffusionApplication.php
@@ -103,6 +103,7 @@
'symbol/' => 'DiffusionRepositorySymbolsController',
'staging/' => 'DiffusionRepositoryEditStagingController',
'automation/' => 'DiffusionRepositoryEditAutomationController',
+ 'testautomation/' => 'DiffusionRepositoryTestAutomationController',
),
'pathtree/(?P<dblob>.*)' => 'DiffusionPathTreeController',
'mirror/' => array(
diff --git a/src/applications/diffusion/controller/DiffusionRepositoryEditAutomationController.php b/src/applications/diffusion/controller/DiffusionRepositoryEditAutomationController.php
--- a/src/applications/diffusion/controller/DiffusionRepositoryEditAutomationController.php
+++ b/src/applications/diffusion/controller/DiffusionRepositoryEditAutomationController.php
@@ -4,7 +4,7 @@
extends DiffusionRepositoryEditController {
protected function processDiffusionRequest(AphrontRequest $request) {
- $viewer = $request->getUser();
+ $viewer = $this->getViewer();
$drequest = $this->diffusionRequest;
$repository = $drequest->getRepository();
diff --git a/src/applications/diffusion/controller/DiffusionRepositoryEditMainController.php b/src/applications/diffusion/controller/DiffusionRepositoryEditMainController.php
--- a/src/applications/diffusion/controller/DiffusionRepositoryEditMainController.php
+++ b/src/applications/diffusion/controller/DiffusionRepositoryEditMainController.php
@@ -688,6 +688,19 @@
$this->getRepositoryControllerURI($repository, 'edit/automation/'));
$view->addAction($edit);
+ $can_test = $repository->canPerformAutomation();
+
+ $test = id(new PhabricatorActionView())
+ ->setIcon('fa-gamepad')
+ ->setName(pht('Test Configuration'))
+ ->setWorkflow(true)
+ ->setDisabled(!$can_test)
+ ->setHref(
+ $this->getRepositoryControllerURI(
+ $repository,
+ 'edit/testautomation/'));
+ $view->addAction($test);
+
return $view;
}
diff --git a/src/applications/diffusion/controller/DiffusionRepositoryTestAutomationController.php b/src/applications/diffusion/controller/DiffusionRepositoryTestAutomationController.php
new file mode 100644
--- /dev/null
+++ b/src/applications/diffusion/controller/DiffusionRepositoryTestAutomationController.php
@@ -0,0 +1,78 @@
+<?php
+
+final class DiffusionRepositoryTestAutomationController
+ extends DiffusionRepositoryEditController {
+
+ protected function processDiffusionRequest(AphrontRequest $request) {
+ $viewer = $this->getViewer();
+ $drequest = $this->diffusionRequest;
+ $repository = $drequest->getRepository();
+
+ $repository = id(new PhabricatorRepositoryQuery())
+ ->setViewer($viewer)
+ ->requireCapabilities(
+ array(
+ PhabricatorPolicyCapability::CAN_VIEW,
+ PhabricatorPolicyCapability::CAN_EDIT,
+ ))
+ ->withIDs(array($repository->getID()))
+ ->executeOne();
+ if (!$repository) {
+ return new Aphront404Response();
+ }
+
+ $edit_uri = $this->getRepositoryControllerURI($repository, 'edit/');
+
+ if (!$repository->canPerformAutomation()) {
+ return $this->newDialog()
+ ->setTitle(pht('Automation Not Configured'))
+ ->appendParagraph(
+ pht(
+ 'You can not run a configuration test for this repository '.
+ 'because you have not configured repository automation yet. '.
+ 'Configure it first, then test the configuration.'))
+ ->addCancelButton($edit_uri);
+ }
+
+ if ($request->isFormPost()) {
+ $op = new DrydockTestRepositoryOperation();
+
+ $operation = DrydockRepositoryOperation::initializeNewOperation($op)
+ ->setAuthorPHID($viewer->getPHID())
+ ->setObjectPHID($repository->getPHID())
+ ->setRepositoryPHID($repository->getPHID())
+ ->setRepositoryTarget('none:')
+ ->save();
+
+ $operation->scheduleUpdate();
+
+ $operation_id = $operation->getID();
+ $operation_uri = "/drydock/operation/{$operation_id}/";
+
+ return id(new AphrontRedirectResponse())
+ ->setURI($operation_uri);
+ }
+
+ return $this->newDialog()
+ ->setTitle(pht('Test Automation Configuration'))
+ ->appendParagraph(
+ pht(
+ 'This configuration test will build a working copy of the '.
+ 'repository and perform some basic validation. If it works, '.
+ 'your configuration is substantially correct.'))
+ ->appendParagraph(
+ pht(
+ 'The test will not perform any writes against the repository, so '.
+ 'write operations may still fail even if the test passes. This '.
+ 'test covers building and reading working copies, but not writing '.
+ 'to them.'))
+ ->appendParagraph(
+ pht(
+ 'If you run into write failures despite passing this test, '.
+ 'it suggests that your setup is nearly correct but authentication '.
+ 'is probably not fully configured.'))
+ ->addCancelButton($edit_uri)
+ ->addSubmitButton(pht('Start Test'));
+ }
+
+}
diff --git a/src/applications/drydock/controller/DrydockRepositoryOperationViewController.php b/src/applications/drydock/controller/DrydockRepositoryOperationViewController.php
--- a/src/applications/drydock/controller/DrydockRepositoryOperationViewController.php
+++ b/src/applications/drydock/controller/DrydockRepositoryOperationViewController.php
@@ -46,10 +46,15 @@
->setHeader($header)
->addPropertyList($properties);
+ $status_view = id(new DrydockRepositoryOperationStatusView())
+ ->setUser($viewer)
+ ->setOperation($operation);
+
return $this->buildApplicationPage(
array(
$crumbs,
$object_box,
+ $status_view,
),
array(
'title' => $title,
diff --git a/src/applications/drydock/operation/DrydockTestRepositoryOperation.php b/src/applications/drydock/operation/DrydockTestRepositoryOperation.php
new file mode 100644
--- /dev/null
+++ b/src/applications/drydock/operation/DrydockTestRepositoryOperation.php
@@ -0,0 +1,53 @@
+<?php
+
+final class DrydockTestRepositoryOperation
+ extends DrydockRepositoryOperationType {
+
+ const OPCONST = 'test';
+
+ public function getOperationDescription(
+ DrydockRepositoryOperation $operation,
+ PhabricatorUser $viewer) {
+ return pht('Test Configuration');
+ }
+
+ public function getOperationCurrentStatus(
+ DrydockRepositoryOperation $operation,
+ PhabricatorUser $viewer) {
+
+ $repository = $operation->getRepository();
+ switch ($operation->getOperationState()) {
+ case DrydockRepositoryOperation::STATE_WAIT:
+ return pht(
+ 'Waiting to test configuration for %s...',
+ $repository->getMonogram());
+ case DrydockRepositoryOperation::STATE_WORK:
+ return pht(
+ 'Testing configuration for %s. This may take a moment if Drydock '.
+ 'has to clone the repository for the first time.',
+ $repository->getMonogram());
+ case DrydockRepositoryOperation::STATE_DONE:
+ return pht(
+ 'Success! Automation is configured properly and Drydock can '.
+ 'operate on %s.',
+ $repository->getMonogram());
+ }
+ }
+
+ public function applyOperation(
+ DrydockRepositoryOperation $operation,
+ DrydockInterface $interface) {
+ $repository = $operation->getRepository();
+
+ if ($repository->isGit()) {
+ $interface->execx('git status');
+ } else if ($repository->isHg()) {
+ $interface->execx('hg status');
+ } else if ($repository->isSVN()) {
+ $interface->execx('svn status');
+ } else {
+ throw new PhutilMethodNotImplementedException();
+ }
+ }
+
+}
diff --git a/src/applications/drydock/worker/DrydockRepositoryOperationUpdateWorker.php b/src/applications/drydock/worker/DrydockRepositoryOperationUpdateWorker.php
--- a/src/applications/drydock/worker/DrydockRepositoryOperationUpdateWorker.php
+++ b/src/applications/drydock/worker/DrydockRepositoryOperationUpdateWorker.php
@@ -165,6 +165,9 @@
'branch' => $name,
);
break;
+ case 'none':
+ $spec = array();
+ break;
default:
throw new Exception(
pht(
diff --git a/src/docs/user/userguide/differential_land.diviner b/src/docs/user/userguide/differential_land.diviner
new file mode 100644
--- /dev/null
+++ b/src/docs/user/userguide/differential_land.diviner
@@ -0,0 +1,53 @@
+@title Differential User Guide: Automated Landing
+@group userguide
+
+Configuring Phabricator so you can "Land Revision" from the web UI.
+
+
+Overview
+========
+
+IMPORTANT: This feature is a prototype and has substantial limitations.
+
+Phabricator can be configured so that approved revisions may be published
+directly from the web interface. This can make publishing changes more
+convenient, particularly for open source projects where authors may not have
+commit access to the repository. This document explains the workflow and how to
+configure it.
+
+When properly configured, a {nav Land Revision} action will appear in
+Differential. This action works like `arc land` on the command line, and
+merges and publishes the revision.
+
+This feature has significant limitations:
+
+ - This feature is a prototype.
+ - This feature is only supported in Git.
+ - This feature always lands changes onto `master`.
+ - This feature does not currently provide chain of custody, and what lands
+ may be arbitrarily different than what is shown in Differential.
+
+To be landable, a revision must satisfy these requirements:
+
+ - It must belong to a repository which is tracked in Diffusion
+ (both hosted and imported repositories will work).
+ - The repository must have a **Staging Area** configured.
+ - The repository must have **Repository Automation** configured. For
+ details, see @{article:Drydock User Guide: Repository Automation}.
+ - The revision must have been created with `arc diff` and pushed to the
+ configured staging area at creation time.
+ - The user clicking the "Land Revision" button must have permission to push
+ to the repository.
+
+If these requirements are met, the {nav Land Revision} action should be
+available in the UI.
+
+
+Next Steps
+==========
+
+Continue by:
+
+ - configuring repository automation with
+ @{article:Drydock User Guide: Repository Automation}; or
+ - returning to the @{article:Differential User Guide}.
diff --git a/src/docs/user/userguide/drydock.diviner b/src/docs/user/userguide/drydock.diviner
--- a/src/docs/user/userguide/drydock.diviner
+++ b/src/docs/user/userguide/drydock.diviner
@@ -15,16 +15,19 @@
you will configure Drydock to enable capabilities in other applications:
- Harbormaster can use Drydock to host builds.
- - In the future, Differential will be able to use Drydock to perform
- server-side merges.
+ - Differential can use Drydock to perform server-side merges.
Users will not normally interact with Drydock directly.
+If you want to get started with Drydock right away, see
+@{article:Drydock User Guide: Quick Start} for specific instructions on
+configuring integrations.
+
What Drydock Does
=================
-Drydock manages working copies, build hosts, and other software and hardware
+Drydock manages working copies, hosts, and other software and hardware
resources that build and deployment processes may require in order to perform
useful work.
@@ -49,15 +52,202 @@
Drydock solves these scaling problems by providing a central allocation
framework for //resources//, which are physical or virtual resources like a
-build host or a working copy. Processes which need to share hardware or
-software can use Drydock to coordinate creation, access, and destruction of
-those resources.
+host or a working copy. Processes which need to share hardware or software can
+use Drydock to coordinate creation, access, and destruction of those resources.
Applications ask Drydock for resources matching a description, and it allocates
a corresponding resource by either finding a suitable unused resource or
creating a new resource. When work completes, the resource is returned to the
resource pool or destroyed.
+
+Getting Started with Drydock
+============================
+
+In general, you will interact with Drydock by configuring blueprints, which
+tell Drydock how to build resources. You can jump into this topic directly
+in @{article:Drydock Blueprints}.
+
+For help on configuring specific application features:
+
+ - to configure server-side merges from Differential, see
+ @{article:Differential User Guide: Automated Landing}.
+
+You should also understand the Drydock security model before deploying it
+in a production environment. See @{article:Drydock User Guide: Security}.
+
+The remainder of this document has some additional high-level discussion about
+how Drydock works and why it works that way, which may be helpful in
+understanding the application as a whole.
+
+
+Drydock Concepts
+================
+
+The major concepts in Drydock are **Blueprints**, **Resources**, **Leases**,
+and the **Allocator**.
+
+**Blueprints** are configuration that tells Drydock how to create resources:
+where it can put them, how to access them, how many it can make at once, who is
+allowed to ask for access to them, how to actually build them, how to clean
+them up when they are no longer in use, and so on.
+
+Drydock starts without any blueprints. You'll add blueprints to configure
+Drydock and enable it to satisfy requests for resources. You can learn more
+about blueprints in @{article:Drydock Blueprints}.
+
+**Resources** represent things (like hosts or working copies) that Drydock has
+created, is managing the lifecycle for, and can give other applications access
+to.
+
+**Leases** are requests for resources with certain qualities by other
+applications. For example, Harbormaster may request a working copy of a
+particular repository so it can run unit tests.
+
+The **Allocator** is where Drydock actually does work. It works roughly like
+this:
+
+ - An application creates a lease describing a resource it needs, and
+ uses this lease to ask Drydock for an appropriate resource.
+ - Drydock looks at free resources to try to find one it can use to satisfy
+ the request. If it finds one, it marks the resource as in use and gives
+ the application details about how to access it.
+ - If it can't find an appropriate resource that already exists, it looks at
+ the blueprints it has configured to try to build one. If it can, it creates
+ a new resource, then gives the application access to it.
+ - Once the application finishes using the resource, it frees it. Depending
+ on configuration, Drydock may reuse it, destroy it, or hold onto it and
+ make a decision later.
+
+Some minor concepts in Drydock are **Slot Locks** and **Repository Operations**.
+
+**Slot Locks** are simple optimistic locks that most Drydock blueprints use to
+avoid race conditions. Their design is not particularly interesting or novel,
+they're just a fairly good fit for most of the locking problems that Drydock
+blueprints tend to encounter and Drydock provides APIs to make them easy to
+work with.
+
+**Repository Operations** help other applications coordinate writes to
+repositories. Multiple applications perform similar kinds of writes, and these
+writes require more sequencing/coordination and user feedback than other
+operations.
+
+
+Architecture Overview
+=====================
+
+This section describes some of Drydock's design goals and architectural
+choices, so you can understand its strengths and weaknesses and which problem
+domains it is well or poorly suited for.
+
+A typical use case for Drydock is giving another application access to a
+working copy in order to run a build or unit test operation. Drydock can
+satisfy the request and resume execution of application code in 1-2 seconds
+under reasonable conditions and with moderate tradeoffs, and can satisfy a
+large number of these requests in parallel.
+
+**Scalable**: Drydock is designed to scale easily to something in the realm of
+thousands of hosts in hundreds of pools, and far beyond that with a little
+work.
+
+Drydock is intended to solve resource management problems at very large scales
+and minimzes blocking operations, locks, and artificial sequencing. Drydock is
+designed to fully utilize an almost arbitrarily large pool of resources and
+improve performance roughly linearly with available hardware.
+
+Because the application assumes that deployment at this scale and complexity
+level is typical, you may need to configure more things and do more work than
+you would under the simplifying assumptions of small scale.
+
+**Heavy Resources**: Drydock assumes that resources are relatively
+heavyweight and and require a meaningful amount (a second or more) of work to
+build, maintain and tear down. It also assumes that leases will often have
+substantial lifespans (seconds or minutes) while performing operations.
+
+Resources like working copies (which typically take several seconds to create
+with a command like `git clone`) and VMs (which typically take several seconds
+to spin up) are good fits for Drydock and for the problems it is intended to
+solve.
+
+Lease operations like running unit tests, performing builds, executing merges,
+generating documentation and running temporary services (which typically last
+at least a few seconds) are also good fits for Drydock.
+
+In both cases, the general concern with lightweight resources and operations is
+that Drydock operation overhead is roughly on the order of a second for many
+tasks, so overhead from Drydock will be substantial if resources are built and
+torn down in a few milliseconds or lease operations require only a fraction of
+a second to execute.
+
+As a rule of thumb, Drydock may be a poor fit for a problem if operations
+typically take less than a second to build, execute, and destroy.
+
+**Focus on Resource Construction**: Drydock is primarily solving a resource
+construction problem: something needs a resource matching some description, so
+Drydock finds or builds that resource as quickly as possible.
+
+Drydock generally prioritizes responding to requests quickly over other
+concerns, like minimizing waste or performing complex scheduling. Although you
+can make adjustments to some of these behaviors, it generally assumes that
+resources are cheap compared to the cost of waiting for resource construction.
+
+This isn't to say that Drydock is grossly wasteful or has a terrible scheduler,
+just that efficient utilization and efficient scheduling aren't the primary
+problems the design focuses on.
+
+This prioritization corresponds to scenarios where resources are something like
+hosts or working copies, and operations are something like builds, and the cost
+of hosts and storage is small compared to the cost of engineer time spent
+waiting on jobs to get scheduled.
+
+Drydock may be a weak fit for a problem if it is bounded by resource
+availability and using resources as efficiently as possible is very important.
+Drydock generally assumes you will respond to a resource deficit by making more
+resources available (usually very cheap), rather than by paying engineers to
+wait for operations to complete (usually very expensive).
+
+**Isolation Tradeoffs**: Drydock assumes that multiple operations running at
+similar levels of trust may be interested in reducing isolation to improve
+performance, reduce complexity, or satisfy some other similar goal. It does not
+guarantee isolation and assumes most operations will not run in total isolation.
+
+If this isn't true for your use case, you'll need to be careful in configuring
+Drydock to make sure that operations are fully isolated and can not interact.
+Complete isolation will reduce the performance of the allocator as it will
+generally prevent it from reusing resources, which is one of the major ways it
+can improve performance.
+
+You can find more discussion of these tradeoffs in
+@{article:Drydock User Guide: Security}.
+
+**Agentless**: Drydock does not require an agent or daemon to be installed on
+hosts. It interacts with hosts over SSH.
+
+**Very Abstract**: Drydock's design is //extremely// abstract. Resources have
+very little hardcoded behavior. The allocator has essentially zero specialized
+knowledge about what it is actually doing.
+
+One aspect of this abstractness is that Drydock is composable, and solves
+complex allocation problems by //asking itself// to build the pieces it needs.
+To build a working copy, Drydock first asks itself for a suitable host. It
+solves this allocation sub-problem, then resolves the original request.
+
+This allows new types of resources to build on Drydock's existing knowledge of
+resource construction by just saying "build one of these other things you
+already know how to build, then apply a few adjustments". This also means that
+you can tell Drydock about a new way to build hosts (say, bring up VMs from a
+different service provider) and the rest of the pipeline can use these new
+hosts interchangeably with the old hosts.
+
+While this design theoretically makes Drydock more powerful and more flexible
+than a less abstract approach, abstraction is frequently a double-edged sword.
+
+Drydock is almost certainly at the extreme upper end of abstraction for tools
+in this space, and the level of abstraction may ultimately match poorly with a
+particular problem domain. Alternative approaches may give you more specialized
+and useful tools for approaching a given problem.
+
+
Next Steps
==========
@@ -65,5 +255,6 @@
- understanding Drydock security concerns with
@{article:Drydock User Guide: Security}; or
+ - learning about blueprints in @{article:Drydock Blueprints}; or
- allowing Phabricator to write to repositories with
@{article:Drydock User Guide: Repository Automation}.
diff --git a/src/docs/user/userguide/drydock_blueprints.diviner b/src/docs/user/userguide/drydock_blueprints.diviner
new file mode 100644
--- /dev/null
+++ b/src/docs/user/userguide/drydock_blueprints.diviner
@@ -0,0 +1,80 @@
+@title Drydock Blueprints
+@group userguide
+
+Overview of Drydock blueprint types.
+
+
+Overview
+========
+
+IMPORTANT: Drydock is not a mature application and may be difficult to
+configure and use for now.
+
+Drydock builds and manages various hardware and software resources, like
+hosts and repository working copies. Other applications can use these resources
+to perform useful work (like running tests or builds).
+
+For additional disussion of Drydock, see @{article:Drydock User Guide}.
+
+Drydock can't create any resources until you configure it. You'll configure
+Drydock by creating **Blueprints**. Each blueprint tells Drydock how to build
+a specific kind of resource, how many it is allowed to build, where it should
+build them, who is authorized to request them, and so on.
+
+You can create a new blueprint in Drydock from the web UI:
+
+{nav Drydock > Blueprints > New Blueprint}
+
+Each blueprint builds resources of a specific type, like hosts or repository
+working copies. Detailed topic guides are available for each resource type:
+
+**Hosts**: Hosts are the building block for most other resources. For details,
+see @{article:Drydock Blueprints: Hosts}.
+
+**Working Copies**: Working copies allow Drydock to perform repository
+operations like running tests, performing builds, and handling merges.
+
+
+Authorizing Access
+==================
+
+Before objects in other applications can use a blueprint, the blueprint must
+authorize them.
+
+This mostly serves to prevent users with limited access from executing
+operations on trusted hosts. For additional discussion, see
+@{article:Drydock User Guide: Security}.
+
+This also broadly prevents Drydock from surprising you by coming up with a
+valid but unintended solution to an allocation problem which runs some
+operation on resources that are techincally suitable but not desirable. For
+example, you may not want your Android builds running on your iPhone build
+tier, even if there's no technical reason they can't.
+
+You can review active authorizations and pending authorization requests in
+the "Active Authorizations" section of the blueprint detail screen.
+
+To approve an authorization, click it and select {nav Approve Authorization}.
+Until you do, the requesting object won't be able to access resources from
+the blueprint.
+
+You can also decline an authorization. This prevents use of resources and
+removes it from the authorization approval queue.
+
+
+Disabling Blueprints
+====================
+
+You can disable a blueprint by selecting {nav Disable Blueprint} from the
+blueprint detail screen.
+
+Disabled blueprints will no longer be used for new allocations. However,
+existing resources will continue to function.
+
+
+Next Steps
+==========
+
+Continue by:
+
+ - returning to the @{article:Drydock User Guide}.
diff --git a/src/docs/user/userguide/drydock_hosts.diviner b/src/docs/user/userguide/drydock_hosts.diviner
new file mode 100644
--- /dev/null
+++ b/src/docs/user/userguide/drydock_hosts.diviner
@@ -0,0 +1,126 @@
+@title Drydock Blueprints: Hosts
+@group userguide
+
+Guide to configuring Drydock host blueprints.
+
+
+Overview
+========
+
+IMPORTANT: Drydock is not a mature application and may be difficult to
+configure and use for now.
+
+To give Drydock access to machines so it can perform work, you'll configure
+**host blueprints**. These blueprints tell Drydock where to find machines (or
+how to build machines) and how to connect to them.
+
+Once Drydock has access to hosts it can use them to build more interesting and
+complex types of resources, like repository working copies.
+
+Drydock currently supports these kinds of host blueprints:
+
+ - **Almanac Hosts**: Gives Drydock access to a predefined list of hosts.
+
+Drydock may support additional blueprints in the future.
+
+
+Security
+========
+
+Drydock can be used to run semi-trusted and untrusted code, and you may want
+to isolate specific processes or classes of processes from one another. See
+@{article:Drydock User Guide: Security} for discussion of security
+concerns and guidance on how to make isolation tradeoffs.
+
+
+General Considerations
+======================
+
+**You must install software on hosts.** Drydock does not currently handle
+installing software on hosts. You'll need to make sure any hosts are configured
+properly with any software you need, and have tools like `git`, `hg` or `svn`
+that may be required to interact with working copies.
+
+You do **not** need to install PHP, arcanist, libphutil or Phabricator on the
+hosts unless you are specifically running `arc` commands.
+
+**You must configure authentication.** Drydock also does not handle credentials
+for VCS operations. If you're interacting with repositories hosted on
+Phabricator, the simplest way to set this up is something like this:
+
+ - Create a new bot user in Phabricator.
+ - In {nav Settings > SSH Public Keys}, add a public key or generate a
+ keypair.
+ - Put the private key on your build hosts as `~/.ssh/id_rsa` for whatever
+ user you're connecting with.
+
+This will let processes on the host access Phabricator as the bot user, and
+use the bot user's permissions to pull and push changes.
+
+If you're using hosted repositories from an external service, you can follow
+similar steps for that service.
+
+Note that any processes running under the given user account will have access
+to the private key, so you should give the bot the smallest acceptable level of
+permissions if you're running semi-trusted or untrusted code like unit tests.
+
+**You must create a `/var/drydock` directory.** This is hard-coded in Drydock
+for now, so you need to create it on the hosts. This can be a symlink to
+a different location if you prefer.
+
+
+Almanac Hosts
+=============
+
+The **Almanac Hosts** blueprint type gives Drydock access to a predefined list
+of hosts which you configure in the Almanac application. This is the simplest
+type of blueprint to set up.
+
+For more information about Almanac, see @{article:Almanac User Guide}.
+
+For example, suppose you have `build001.mycompany.com` and
+`build002.mycompany.com`, and want to configure Drydock to be able to use these
+hosts. To do this:
+
+**Create Almanac Devices**: Create a device record in Almanac for each your
+hosts.
+
+{nav Almanac > Devices > Create Device}
+
+Enter the device names (like `build001.mycompany.com`). After creating the
+devices, use {nav Add Interface} to configure the ports and IP addresses that
+Drydock should connect to over SSH (normally, this is port `22`).
+
+**Create an Almanac Service**: In the Almanac application, create a new service
+to define the pool of devices you want to use.
+
+{nav Almanac > Services > Create Service}
+
+Choose the service type **Drydock: Resource Pool**. This will allow Drydock
+to use the devices that are bound to the service.
+
+Now, use {nav Add Binding} to bind all of the devices to the service.
+
+You can add more hosts to the pool later by binding additional devices, and
+Drydock will automatically start using them. Likewise, you can remove bindings
+to take hosts out of service.
+
+**Create a Drydock Blueprint**: Now, create a new blueprint in Drydock.
+
+{nav Drydock > Blueprints > New Blueprint}
+
+Choose the **Almanac Hosts** blueprint type.
+
+In **Almanac Services**, select the service you previously created. For
+**Credentials**, select an SSH private key you want Drydock to use to connect
+to the hosts.
+
+Drydock should now be able to build resources from these hosts.
+
+
+Next Steps
+==========
+
+Continue by:
+
+ - returning to @{article:Drydock Blueprints}.
diff --git a/src/docs/user/userguide/drydock_quick_start.diviner b/src/docs/user/userguide/drydock_quick_start.diviner
new file mode 100644
--- /dev/null
+++ b/src/docs/user/userguide/drydock_quick_start.diviner
@@ -0,0 +1,74 @@
+@title Drydock User Guide: Quick Start
+@group userguide
+
+Guide to getting Drydock
+
+Quick Start: Land Revisions
+===========================
+
+Quick start guide to getting "Land Revision" working in Differential. For
+a more detailed guide, see @{article:Drydock User Guide: Repository Automation}.
+
+Choose a repository you want to enable "Land Revision" for. We'll call this
+**Repository X**.
+
+You need to configure a staging area for this repository if you haven't
+already. You can do this in Diffusion in {nav Edit Repository > Edit Staging}.
+We'll call this **Staging Area Y**.
+
+Choose or create a host you want to run merges on. We'll call this
+`automation001`. For example, you might bring up a new host in EC2 and
+label it `automation001.mycompany.com`. You can use an existing host if you
+prefer.
+
+Create a user account on the host, or choose an existing user account. This is
+the user that merges will execute under: Drydock will connect to it and run a
+bunch of `git` commands, then ultimately run `git push`. We'll call this user
+`builder`.
+
+Install `git`, `hg` or `svn` if you haven't already and set up private keys
+for `builder` so it can pull and push any repositories you want to operate
+on.
+
+If your repository and/or staging area are hosted in Phabricator, you may want
+to create a corresponding bot account so you can add keys and give it
+permissions.
+
+At this point you should be able to `ssh builder@automation001` to connect to
+the host, and get a normal shell. You should be able to `git clone ...` from
+**Repository X** and from **Staging Area Y**, and `git push` to **Repository
+X**. If you can't, configure things so you can.
+
+Now, create a host blueprint for the host. You can find a more detailed
+walkthrough in @{article:Drydock Blueprints: Hosts}. Briefly:
+
+ - Create an Almanac device for the host. This should have the IP address and
+ port for your host.
+ - Create an Almanac service bound to the device. This should be a Drydock
+ resource pool service and have a binding to the IP from the previous step.
+ - Create a Drydock host blueprint which uses the service from the previous
+ step. It should be configured with an SSH private key that can be used
+ to connect to `builder@automation001`.
+
+Then, create a new working copy blueprint which uses the host blueprint you
+just made. You can find a more detailed walkthrough in @{article:Drydock
+Blueprints: Working Copies}. Authorize the working copy blueprint to use the
+host blueprint.
+
+Finally, configure repository automation for **Repository X**:
+{nav Edit Repository > Edit Automation}. Provide the working copy blueprint
+from the previous step. Authorize the repository to use the working copy
+blueprint.
+
+After you save changes, click {nav Test Configuration} to test that things
+are working properly.
+
+The "Land Revision" action should now be available on revisions for this
+repository.
+
+Next Steps
+==========
+
+Continue by:
+
+ - returning to @{article:Drydock User Guide}.
diff --git a/src/docs/user/userguide/drydock_repository_automation.diviner b/src/docs/user/userguide/drydock_repository_automation.diviner
--- a/src/docs/user/userguide/drydock_repository_automation.diviner
+++ b/src/docs/user/userguide/drydock_repository_automation.diviner
@@ -7,12 +7,19 @@
Overview
========
-IMPORTANT: This feature is very new and most of the capabilities described
+IMPORTANT: This feature is very new and some of the capabilities described
in this document are not yet available. This feature as a whole is a prototype.
By configuring Drydock and Diffusion appropriately, you can enable **Repository
-Automation** for a repository. Once automation is set up, Phabricator will be
-able to make changes to the repository.
+Automation** for a repository. This will allow Phabricator to make changes
+to the repository.
+
+
+Limitations
+===========
+
+ - This feature is a prototype.
+ - Only Git is supported.
Security
@@ -29,6 +36,45 @@
@{article:Drydock User Guide: Security}.
+Configuring Automation
+======================
+
+To configure automation, use {nav Edit Repository > Edit Automation} from
+Diffusion.
+
+On the configuration screen, specify one or more working copy blueprints in
+Drydock (usually, you'll just use one). Repository automation will use working
+copies built by these blueprints to perform merges and push changes.
+
+For more details on configuring these blueprints, see
+@{article:Drydock Blueprints: Working Copies}.
+
+After selecting one or more blueprints, make sure you authorize the repository
+to use them. Automation operations won't be able to proceed until you do. The
+UI will remind you if you have unauthorized blueprints selected.
+
+
+Testing Configuration
+=====================
+
+Once the blueprints are configured and authorized, use {nav Test Configuration}
+to check that things are configured correctly. This will build a working copy
+in Drydock, connect to it, and run a trivial command (like `git status`) to
+make sure things work.
+
+If it's the first time you're doing this, it may take a few moments since it
+will need to clone a fresh working copy.
+
+If the test is successful, your configuration is generally in good shape. If
+not, it should give you more details about what went wrong.
+
+Since the test doesn't actually do a push, it's possible that you may have
+everything configured properly //except// write access. In this case, you'll
+run into a permission error when you try to actually perform a merge or other
+similar write. If you do, adjust permissions or credentials appropriately so
+the working copy can be pushed from.
+
+
Next Steps
==========
diff --git a/src/docs/user/userguide/drydock_working_copies.diviner b/src/docs/user/userguide/drydock_working_copies.diviner
new file mode 100644
--- /dev/null
+++ b/src/docs/user/userguide/drydock_working_copies.diviner
@@ -0,0 +1,39 @@
+@title Drydock Blueprints: Working Copies
+@group userguide
+
+Guide to configuring Drydock working copy blueprints.
+
+
+Overview
+========
+
+IMPORTANT: Drydock is not a mature application and may be difficult to
+configure and use for now.
+
+To let Drydock build repository working copies in order to run unit tests and
+other similar operations, you'll configure **working copy blueprints**.
+
+Working Copies
+==============
+
+Working copy blueprints rely on host blueprints, so you'll need to configure
+a suitable host blueprint first. See @{article:Drydock Blueprints: Hosts}.
+
+To configure a working copy blueprint, choose the host blueprints it should
+use in **Use Blueprints**.
+
+You can optionally specify a **Limit**. If you do, the blueprint won't be
+allowed to create more than this many simultaneous resources. If you leave
+it empty, the blueprint will be able to create an unlimited number of
+resources.
+
+After you save the blueprint, make sure you authorize it to use the selected
+host blueprints. It won't be able to acquire host resources until you do.
+
+
+Next Steps
+==========
+
+Continue by:
+
+ - returning to @{article:Drydock Blueprints}.

File Metadata

Mime Type
text/plain
Expires
Sun, Oct 5, 4:52 AM (3 d, 8 h ago)
Storage Engine
amazon-s3
Storage Format
Encrypted (AES-256-CBC)
Storage Handle
phabricator/secure/5o/um/4aaymk5pomp7olwg
Default Alt Text
D14349.id.diff (39 KB)

Event Timeline

Phabricator · Built by Phacility