diff --git a/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php b/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php
index eceb8aaac0..850ff9c533 100644
--- a/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php
+++ b/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php
@@ -1,338 +1,352 @@
 <?php
 
 final class PhabricatorMetaMTAConfigOptions
   extends PhabricatorApplicationConfigOptions {
 
   public function getName() {
     return pht('Mail');
   }
 
   public function getDescription() {
     return pht('Configure Mail.');
   }
 
   public function getOptions() {
     $send_as_user_desc = $this->deformat(pht(<<<EODOC
 When a user takes an action which generates an email notification (like
 commenting on a Differential revision), Phabricator can either send that mail
 "From" the user's email address (like "alincoln@logcabin.com") or "From" the
 'metamta.default-address' address.
 
 The user experience is generally better if Phabricator uses the user's real
 address as the "From" since the messages are easier to organize when they appear
 in mail clients, but this will only work if the server is authorized to send
 email on behalf of the "From" domain. Practically, this means:
 
   - If you are doing an install for Example Corp and all the users will have
     corporate @corp.example.com addresses and any hosts Phabricator is running
     on are authorized to send email from corp.example.com, you can enable this
     to make the user experience a little better.
   - If you are doing an install for an open source project and your users will
     be registering via Facebook and using personal email addresses, you probably
     should not enable this or all of your outgoing email might vanish into SFP
     blackholes.
   - If your install is anything else, you're safer leaving this off, at least
     initially, since the risk in turning it on is that your outgoing mail will
     never arrive.
 EODOC
 ));
 
     $one_mail_per_recipient_desc = $this->deformat(pht(<<<EODOC
 When a message is sent to multiple recipients (for example, several reviewers on
 a code review), Phabricator can either deliver one email to everyone (e.g., "To:
 alincoln, usgrant, htaft") or separate emails to each user (e.g., "To:
 alincoln", "To: usgrant", "To: htaft"). The major advantages and disadvantages
 of each approach are:
 
   - One mail to everyone:
     - Recipients can see To/Cc at a glance.
     - If you use mailing lists, you won't get duplicate mail if you're
       a normal recipient and also Cc'd on a mailing list.
     - Getting threading to work properly is harder, and probably requires
       making mail less useful by turning off options.
     - Sometimes people will "Reply All" and everyone will get two mails,
       one from the user and one from Phabricator turning their mail into
       a comment.
     - Not supported with a private reply-to address.
     - Mails are sent in the server default translation.
   - One mail to each user:
     - Recipients need to look in the mail body to see To/Cc.
     - If you use mailing lists, recipients may sometimes get duplicate
       mail.
     - Getting threading to work properly is easier, and threading settings
       can be customzied by each user.
     - "Reply All" no longer spams all other users.
     - Required if private reply-to addresses are configured.
     - Mails are sent in the language of user preference.
 
 In the code, splitting one outbound email into one-per-recipient is sometimes
 referred to as "multiplexing".
 EODOC
 ));
 
     $herald_hints_description = $this->deformat(pht(<<<EODOC
 You can disable the Herald hints in email if users prefer smaller messages.
 These are the links under the header "WHY DID I GET THIS EMAIL?". If you set
 this to true, they will not appear in any mail. Users can still navigate to
 the links via the web interface.
 EODOC
 ));
 
     $reply_hints_description = $this->deformat(pht(<<<EODOC
 You can disable the hints under "REPLY HANDLER ACTIONS" if users prefer
 smaller messages. The actions themselves will still work properly.
 EODOC
 ));
 
     $recipient_hints_description = $this->deformat(pht(<<<EODOC
 You can disable the "To:" and "Cc:" footers in mail if users prefer smaller
 messages.
 EODOC
 ));
 
     $bulk_description = $this->deformat(pht(<<<EODOC
 If this option is enabled, Phabricator will add a "Precedence: bulk" header to
 transactional mail (e.g., Differential, Maniphest and Herald notifications).
 This may improve the behavior of some auto-responder software and prevent it
 from replying. However, it may also cause deliverability issues -- notably, you
 currently can not send this header via Amazon SES, and enabling this option with
 SES will prevent delivery of any affected mail.
 EODOC
+));
+
+    $email_preferences_description = $this->deformat(pht(<<<EODOC
+You can disable the email preference link in emails if users prefer smaller
+emails.
+EODOC
 ));
 
     $re_prefix_description = $this->deformat(pht(<<<EODOC
 Mail.app on OS X Lion won't respect threading headers unless the subject is
 prefixed with "Re:". If you enable this option, Phabricator will add "Re:" to
 the subject line of all mail which is expected to thread. If you've set
 'metamta.one-mail-per-recipient', users can override this setting in their
 preferences.
 EODOC
 ));
 
     $vary_subjects_description = $this->deformat(pht(<<<EODOC
 If true, allow MetaMTA to change mail subjects to put text like '[Accepted]' and
 '[Commented]' in them. This makes subjects more useful, but might break
 threading on some clients. If you've set 'metamta.one-mail-per-recipient', users
 can override this setting in their preferences.
 EODOC
 ));
 
     $reply_to_description = $this->deformat(pht(<<<EODOC
 If you enable {{metamta.public-replies}}, Phabricator uses "From" to
 authenticate users. You can additionally enable this setting to try to
 authenticate with 'Reply-To'. Note that this is completely spoofable and
 insecure (any user can set any 'Reply-To' address) but depending on the nature
 of your install or other deliverability conditions this might be okay.
 Generally, you can't do much more by spoofing Reply-To than be annoying (you can
 write but not read content). But this is still **COMPLETELY INSECURE**.
 EODOC
 ));
 
     $adapter_description = $this->deformat(pht(<<<EODOC
 Adapter class to use to transmit mail to the MTA. The default uses
 PHPMailerLite, which will invoke "sendmail". This is appropriate if sendmail
 actually works on your host, but if you haven't configured mail it may not be so
 great. A number of other mailers are available (e.g., SES, SendGrid, SMTP,
 custom mailers), consult "Configuring Outbound Email" in the documentation for
 details.
 EODOC
 ));
 
     $placeholder_description = $this->deformat(pht(<<<EODOC
 When sending a message that has no To recipient (i.e. all recipients are CC'd,
 for example when multiplexing mail), set the To field to the following value. If
 no value is set, messages with no To will have their CCs upgraded to To.
 EODOC
 ));
 
     $public_replies_description = $this->deformat(pht(<<<EODOC
 By default, Phabricator generates unique reply-to addresses and sends a separate
 email to each recipient when you enable reply handling. This is more secure than
 using "From" to establish user identity, but can mean users may receive multiple
 emails when they are on mailing lists. Instead, you can use a single, non-unique
 reply to address and authenticate users based on the "From" address by setting
 this to 'true'. This trades away a little bit of security for convenience, but
 it's reasonable in many installs. Object interactions are still protected using
 hashes in the single public email address, so objects can not be replied to
 blindly.
 EODOC
 ));
 
     $single_description = $this->deformat(pht(<<<EODOC
 If you want to use a single mailbox for Phabricator reply mail, you can use this
 and set a common prefix for reply addresses generated by Phabricator. It will
 make use of the fact that a mail-address such as
 `phabricator+D123+1hjk213h@example.com` will be delivered to the `phabricator`
 user's mailbox. Set this to the left part of the email address and it will be
 prepended to all generated reply addresses.
 
 For example, if you want to use `phabricator@example.com`, this should be set
 to `phabricator`.
 EODOC
 ));
 
     $address_description = $this->deformat(pht(<<<EODOC
 When email is sent, what format should Phabricator use for user's email
 addresses? Valid values are:
 
  - `short`: 'gwashington <gwashington@example.com>'
  - `real`:  'George Washington <gwashington@example.com>'
  - `full`: 'gwashington (George Washington) <gwashington@example.com>'
 
 The default is `full`.
 EODOC
 ));
 
     return array(
       $this->newOption(
         'metamta.default-address',
         'string',
         'noreply@phabricator.example.com')
         ->setDescription(pht('Default "From" address.')),
       $this->newOption(
         'metamta.domain',
         'string',
         'phabricator.example.com')
         ->setDescription(pht('Domain used to generate Message-IDs.')),
       $this->newOption(
         'metamta.mail-adapter',
         'class',
         'PhabricatorMailImplementationPHPMailerLiteAdapter')
         ->setBaseClass('PhabricatorMailImplementationAdapter')
         ->setSummary(pht('Control how mail is sent.'))
         ->setDescription($adapter_description),
       $this->newOption(
         'metamta.one-mail-per-recipient',
         'bool',
         true)
         ->setBoolOptions(
           array(
             pht('Send Mail To Each Recipient'),
             pht('Send Mail To All Recipients'),
           ))
         ->setSummary(
           pht(
             'Controls whether Phabricator sends one email with multiple '.
             'recipients in the "To:" line, or multiple emails, each with a '.
             'single recipient in the "To:" line.'))
         ->setDescription($one_mail_per_recipient_desc),
       $this->newOption('metamta.can-send-as-user', 'bool', false)
         ->setBoolOptions(
           array(
             pht('Send as User Taking Action'),
             pht('Send as Phabricator'),
           ))
         ->setSummary(
           pht(
             'Controls whether Phabricator sends email "From" users.'))
         ->setDescription($send_as_user_desc),
       $this->newOption(
         'metamta.reply-handler-domain',
         'string',
         'phabricator.example.com')
         ->setDescription(pht(
           'Domain used for reply email addresses. Some applications can '.
           'configure this domain.')),
       $this->newOption('metamta.reply.show-hints', 'bool', true)
         ->setBoolOptions(
           array(
             pht('Show Reply Handler Hints'),
             pht('No Reply Handler Hints'),
           ))
         ->setSummary(pht('Show hints about reply handler actions in email.'))
         ->setDescription($reply_hints_description),
       $this->newOption('metamta.herald.show-hints', 'bool', true)
         ->setBoolOptions(
           array(
             pht('Show Herald Hints'),
             pht('No Herald Hints'),
           ))
         ->setSummary(pht('Show hints about Herald rules in email.'))
         ->setDescription($herald_hints_description),
       $this->newOption('metamta.recipients.show-hints', 'bool', true)
         ->setBoolOptions(
           array(
             pht('Show Recipient Hints'),
             pht('No Recipient Hints'),
           ))
         ->setSummary(pht('Show "To:" and "Cc:" footer hints in email.'))
         ->setDescription($recipient_hints_description),
+      $this->newOption('metamta.email-preferences', 'bool', true)
+        ->setBoolOptions(
+          array(
+            pht('Show Email Preferences Link'),
+            pht('No Email Preferences Link'),
+          ))
+        ->setSummary(pht('Show email preferences link in email.'))
+        ->setDescription($email_preferences_description),
       $this->newOption('metamta.precedence-bulk', 'bool', false)
         ->setBoolOptions(
           array(
             pht('Add "Precedence: bulk" Header'),
             pht('No "Precedence: bulk" Header'),
           ))
         ->setSummary(pht('Control the "Precedence: bulk" header.'))
         ->setDescription($bulk_description),
       $this->newOption('metamta.re-prefix', 'bool', false)
         ->setBoolOptions(
           array(
             pht('Force "Re:" Subject Prefix'),
             pht('No "Re:" Subject Prefix'),
           ))
         ->setSummary(pht('Control "Re:" subject prefix, for Mail.app.'))
         ->setDescription($re_prefix_description),
       $this->newOption('metamta.vary-subjects', 'bool', true)
         ->setBoolOptions(
           array(
             pht('Allow Varied Subjects'),
             pht('Always Use the Same Thread Subject'),
           ))
         ->setSummary(pht('Control subject variance, for some mail clients.'))
         ->setDescription($vary_subjects_description),
       $this->newOption('metamta.insecure-auth-with-reply-to', 'bool', false)
         ->setBoolOptions(
           array(
             pht('Allow Insecure Reply-To Auth'),
             pht('Disallow Reply-To Auth'),
           ))
         ->setSummary(pht('Trust "Reply-To" headers for authentication.'))
         ->setDescription($reply_to_description),
       $this->newOption('metamta.placeholder-to-recipient', 'string', null)
         ->setSummary(pht('Placeholder for mail with only CCs.'))
         ->setDescription($placeholder_description),
       $this->newOption('metamta.public-replies', 'bool', false)
         ->setBoolOptions(
           array(
             pht('Use Public Replies (Less Secure)'),
             pht('Use Private Replies (More Secure)'),
           ))
         ->setSummary(
           pht(
             'Phabricator can use less-secure but mailing list friendly public '.
             'reply addresses.'))
         ->setDescription($public_replies_description),
       $this->newOption('metamta.single-reply-handler-prefix', 'string', null)
         ->setSummary(
           pht('Allow Phabricator to use a single mailbox for all replies.'))
         ->setDescription($single_description),
       $this->newOption('metamta.user-address-format', 'enum', 'full')
         ->setEnumOptions(
           array(
             'short' => 'short',
             'real' => 'real',
             'full' => 'full',
           ))
         ->setSummary(pht('Control how Phabricator renders user names in mail.'))
         ->setDescription($address_description)
         ->addExample('gwashington <gwashington@example.com>', 'short')
         ->addExample('George Washington <gwashington@example.com>', 'real')
         ->addExample(
           'gwashington (George Washington) <gwashington@example.com>',
           'full'),
       $this->newOption('metamta.email-body-limit', 'int', 524288)
         ->setDescription(
           pht(
             'You can set a limit for the maximum byte size of outbound mail. '.
             'Mail which is larger than this limit will be truncated before '.
             'being sent. This can be useful if your MTA rejects mail which '.
             'exceeds some limit (this is reasonably common). Specify a value '.
             'in bytes.'))
         ->setSummary(pht('Global cap for size of generated emails (bytes).'))
         ->addExample(524288, pht('Truncate at 512KB'))
         ->addExample(1048576, pht('Truncate at 1MB')),
     );
   }
 
 }
diff --git a/src/applications/metamta/view/PhabricatorMetaMTAMailBody.php b/src/applications/metamta/view/PhabricatorMetaMTAMailBody.php
index 9e1a41f1c0..8d6c82cfc2 100644
--- a/src/applications/metamta/view/PhabricatorMetaMTAMailBody.php
+++ b/src/applications/metamta/view/PhabricatorMetaMTAMailBody.php
@@ -1,237 +1,254 @@
 <?php
 
 /**
  * Render the body of an application email by building it up section-by-section.
  *
  * @task compose  Composition
  * @task render   Rendering
  */
 final class PhabricatorMetaMTAMailBody {
 
   private $sections = array();
   private $htmlSections = array();
   private $attachments = array();
 
   private $viewer;
 
   public function getViewer() {
     return $this->viewer;
   }
 
   public function setViewer($viewer) {
     $this->viewer = $viewer;
   }
 
 /* -(  Composition  )-------------------------------------------------------- */
 
 
   /**
    * Add a raw block of text to the email. This will be rendered as-is.
    *
    * @param string Block of text.
    * @return this
    * @task compose
    */
   public function addRawSection($text) {
     if (strlen($text)) {
       $text = rtrim($text);
       $this->sections[] = $text;
       $this->htmlSections[] = phutil_escape_html_newlines(
         phutil_tag('div', array(), $text));
     }
     return $this;
   }
 
   public function addRemarkupSection($text) {
     try {
       $engine = PhabricatorMarkupEngine::newMarkupEngine(array());
       $engine->setConfig('viewer', $this->getViewer());
       $engine->setMode(PhutilRemarkupEngine::MODE_TEXT);
       $styled_text = $engine->markupText($text);
       $this->sections[] = $styled_text;
     } catch (Exception $ex) {
       phlog($ex);
       $this->sections[] = $text;
     }
 
     try {
       $mail_engine = PhabricatorMarkupEngine::newMarkupEngine(array());
       $mail_engine->setConfig('viewer', $this->getViewer());
       $mail_engine->setMode(PhutilRemarkupEngine::MODE_HTML_MAIL);
       $mail_engine->setConfig(
         'uri.base',
         PhabricatorEnv::getProductionURI('/'));
       $html = $mail_engine->markupText($text);
       $this->htmlSections[] = $html;
     } catch (Exception $ex) {
       phlog($ex);
       $this->htmlSections[] = phutil_escape_html_newlines(
         phutil_tag(
           'div',
           array(),
           $text));
     }
 
     return $this;
   }
 
   public function addRawPlaintextSection($text) {
     if (strlen($text)) {
       $text = rtrim($text);
       $this->sections[] = $text;
     }
     return $this;
   }
 
   public function addRawHTMLSection($html) {
     $this->htmlSections[] = phutil_safe_html($html);
     return $this;
   }
 
 
   /**
    * Add a block of text with a section header. This is rendered like this:
    *
    *    HEADER
    *      Text is indented.
    *
    * @param string Header text.
    * @param string Section text.
    * @return this
    * @task compose
    */
   public function addTextSection($header, $section) {
     if ($section instanceof PhabricatorMetaMTAMailSection) {
       $plaintext = $section->getPlaintext();
       $html = $section->getHTML();
     } else {
       $plaintext = $section;
       $html = phutil_escape_html_newlines(phutil_tag('div', array(), $section));
     }
 
     $this->addPlaintextSection($header, $plaintext);
     $this->addHTMLSection($header, $html);
     return $this;
   }
 
   public function addPlaintextSection($header, $text) {
     $this->sections[] = $header."\n".$this->indent($text);
     return $this;
   }
 
   public function addHTMLSection($header, $html_fragment) {
     $this->htmlSections[] = array(
       phutil_tag(
         'div',
         array(),
         array(
           phutil_tag('strong', array(), $header),
           phutil_tag('div', array(), $html_fragment),
         )),
     );
     return $this;
   }
 
   public function addLinkSection($header, $link) {
     $html = phutil_tag('a', array('href' => $link), $link);
     $this->addPlaintextSection($header, $link);
     $this->addHTMLSection($header, $html);
     return $this;
   }
 
   /**
    * Add a Herald section with a rule management URI and a transcript URI.
    *
    * @param string URI to rule transcripts.
    * @return this
    * @task compose
    */
   public function addHeraldSection($xscript_uri) {
     if (!PhabricatorEnv::getEnvConfig('metamta.herald.show-hints')) {
       return $this;
     }
 
     $this->addLinkSection(
       pht('WHY DID I GET THIS EMAIL?'),
       PhabricatorEnv::getProductionURI($xscript_uri));
 
     return $this;
   }
 
 
   /**
    * Add a section with reply handler instructions.
    *
    * @param string Reply handler instructions.
    * @return this
    * @task compose
    */
   public function addReplySection($instructions) {
     if (!PhabricatorEnv::getEnvConfig('metamta.reply.show-hints')) {
       return $this;
     }
     if (!strlen($instructions)) {
       return $this;
     }
 
     $this->addTextSection(pht('REPLY HANDLER ACTIONS'), $instructions);
 
     return $this;
   }
 
+  /**
+   * Add a section with a link to email preferences.
+   *
+   * @return this
+   * @task compose
+   */
+  public function addEmailPreferenceSection() {
+    if (!PhabricatorEnv::getEnvConfig('metamta.email-preferences')) {
+      return $this;
+    }
+
+    $href = PhabricatorEnv::getProductionURI(
+      '/settings/panel/emailpreferences/');
+    $this->addLinkSection(pht('EMAIL PREFERENCES'), $href);
+
+    return $this;
+  }
 
   /**
    * Add an attachment.
    *
    * @param PhabricatorMetaMTAAttachment Attachment.
    * @return this
    * @task compose
    */
   public function addAttachment(PhabricatorMetaMTAAttachment $attachment) {
     $this->attachments[] = $attachment;
     return $this;
   }
 
 
 /* -(  Rendering  )---------------------------------------------------------- */
 
 
   /**
    * Render the email body.
    *
    * @return string Rendered body.
    * @task render
    */
   public function render() {
     return implode("\n\n", $this->sections)."\n";
   }
 
   public function renderHTML() {
     $br = phutil_tag('br');
     $body = phutil_implode_html($br, $this->htmlSections);
     return (string)hsprintf('%s', array($body, $br));
   }
 
   /**
    * Retrieve attachments.
    *
    * @return list<PhabricatorMetaMTAAttachment> Attachments.
    * @task render
    */
   public function getAttachments() {
     return $this->attachments;
   }
 
 
   /**
    * Indent a block of text for rendering under a section heading.
    *
    * @param string Text to indent.
    * @return string Indented text.
    * @task render
    */
   private function indent($text) {
     return rtrim("  ".str_replace("\n", "\n  ", $text));
   }
 
 }
diff --git a/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php b/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php
index ae225915b3..0a1878318b 100644
--- a/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php
+++ b/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php
@@ -1,2542 +1,2543 @@
 <?php
 
 /**
  * @task mail   Sending Mail
  * @task feed   Publishing Feed Stories
  * @task search Search Index
  * @task files  Integration with Files
  */
 abstract class PhabricatorApplicationTransactionEditor
   extends PhabricatorEditor {
 
   private $contentSource;
   private $object;
   private $xactions;
 
   private $isNewObject;
   private $mentionedPHIDs;
   private $continueOnNoEffect;
   private $continueOnMissingFields;
   private $parentMessageID;
   private $heraldAdapter;
   private $heraldTranscript;
   private $subscribers;
   private $unmentionablePHIDMap = array();
 
   private $isPreview;
   private $isHeraldEditor;
   private $isInverseEdgeEditor;
   private $actingAsPHID;
   private $disableEmail;
 
 
   /**
    * Get the class name for the application this editor is a part of.
    *
    * Uninstalling the application will disable the editor.
    *
    * @return string Editor's application class name.
    */
   abstract public function getEditorApplicationClass();
 
 
   /**
    * Get a description of the objects this editor edits, like "Differential
    * Revisions".
    *
    * @return string Human readable description of edited objects.
    */
   abstract public function getEditorObjectsDescription();
 
 
   public function setActingAsPHID($acting_as_phid) {
     $this->actingAsPHID = $acting_as_phid;
     return $this;
   }
 
   public function getActingAsPHID() {
     if ($this->actingAsPHID) {
       return $this->actingAsPHID;
     }
     return $this->getActor()->getPHID();
   }
 
 
   /**
    * When the editor tries to apply transactions that have no effect, should
    * it raise an exception (default) or drop them and continue?
    *
    * Generally, you will set this flag for edits coming from "Edit" interfaces,
    * and leave it cleared for edits coming from "Comment" interfaces, so the
    * user will get a useful error if they try to submit a comment that does
    * nothing (e.g., empty comment with a status change that has already been
    * performed by another user).
    *
    * @param bool  True to drop transactions without effect and continue.
    * @return this
    */
   public function setContinueOnNoEffect($continue) {
     $this->continueOnNoEffect = $continue;
     return $this;
   }
 
   public function getContinueOnNoEffect() {
     return $this->continueOnNoEffect;
   }
 
 
   /**
    * When the editor tries to apply transactions which don't populate all of
    * an object's required fields, should it raise an exception (default) or
    * drop them and continue?
    *
    * For example, if a user adds a new required custom field (like "Severity")
    * to a task, all existing tasks won't have it populated. When users
    * manually edit existing tasks, it's usually desirable to have them provide
    * a severity. However, other operations (like batch editing just the
    * owner of a task) will fail by default.
    *
    * By setting this flag for edit operations which apply to specific fields
    * (like the priority, batch, and merge editors in Maniphest), these
    * operations can continue to function even if an object is outdated.
    *
    * @param bool  True to continue when transactions don't completely satisfy
    *              all required fields.
    * @return this
    */
   public function setContinueOnMissingFields($continue_on_missing_fields) {
     $this->continueOnMissingFields = $continue_on_missing_fields;
     return $this;
   }
 
   public function getContinueOnMissingFields() {
     return $this->continueOnMissingFields;
   }
 
 
   /**
    * Not strictly necessary, but reply handlers ideally set this value to
    * make email threading work better.
    */
   public function setParentMessageID($parent_message_id) {
     $this->parentMessageID = $parent_message_id;
     return $this;
   }
   public function getParentMessageID() {
     return $this->parentMessageID;
   }
 
   public function getIsNewObject() {
     return $this->isNewObject;
   }
 
   protected function getMentionedPHIDs() {
     return $this->mentionedPHIDs;
   }
 
   public function setIsPreview($is_preview) {
     $this->isPreview = $is_preview;
     return $this;
   }
 
   public function getIsPreview() {
     return $this->isPreview;
   }
 
   public function setIsInverseEdgeEditor($is_inverse_edge_editor) {
     $this->isInverseEdgeEditor = $is_inverse_edge_editor;
     return $this;
   }
 
   public function getIsInverseEdgeEditor() {
     return $this->isInverseEdgeEditor;
   }
 
   public function setIsHeraldEditor($is_herald_editor) {
     $this->isHeraldEditor = $is_herald_editor;
     return $this;
   }
 
   public function getIsHeraldEditor() {
     return $this->isHeraldEditor;
   }
 
   /**
    * Prevent this editor from generating email when applying transactions.
    *
    * @param bool  True to disable email.
    * @return this
    */
   public function setDisableEmail($disable_email) {
     $this->disableEmail = $disable_email;
     return $this;
   }
 
   public function getDisableEmail() {
     return $this->disableEmail;
   }
 
   public function setUnmentionablePHIDMap(array $map) {
     $this->unmentionablePHIDMap = $map;
     return $this;
   }
 
   public function getUnmentionablePHIDMap() {
     return $this->unmentionablePHIDMap;
   }
 
   public function getTransactionTypes() {
     $types = array();
 
     if ($this->object instanceof PhabricatorSubscribableInterface) {
       $types[] = PhabricatorTransactions::TYPE_SUBSCRIBERS;
     }
 
     if ($this->object instanceof PhabricatorCustomFieldInterface) {
       $types[] = PhabricatorTransactions::TYPE_CUSTOMFIELD;
     }
 
     if ($this->object instanceof HarbormasterBuildableInterface) {
       $types[] = PhabricatorTransactions::TYPE_BUILDABLE;
     }
 
     if ($this->object instanceof PhabricatorTokenReceiverInterface) {
       $types[] = PhabricatorTransactions::TYPE_TOKEN;
     }
 
     if ($this->object instanceof PhabricatorProjectInterface) {
       $types[] = PhabricatorTransactions::TYPE_EDGE;
     }
 
     return $types;
   }
 
   private function adjustTransactionValues(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
 
     if ($xaction->shouldGenerateOldValue()) {
       $old = $this->getTransactionOldValue($object, $xaction);
       $xaction->setOldValue($old);
     }
 
     $new = $this->getTransactionNewValue($object, $xaction);
     $xaction->setNewValue($new);
   }
 
   private function getTransactionOldValue(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     switch ($xaction->getTransactionType()) {
       case PhabricatorTransactions::TYPE_SUBSCRIBERS:
         return array_values($this->subscribers);
       case PhabricatorTransactions::TYPE_VIEW_POLICY:
         return $object->getViewPolicy();
       case PhabricatorTransactions::TYPE_EDIT_POLICY:
         return $object->getEditPolicy();
       case PhabricatorTransactions::TYPE_JOIN_POLICY:
         return $object->getJoinPolicy();
       case PhabricatorTransactions::TYPE_EDGE:
         $edge_type = $xaction->getMetadataValue('edge:type');
         if (!$edge_type) {
           throw new Exception("Edge transaction has no 'edge:type'!");
         }
 
         $old_edges = array();
         if ($object->getPHID()) {
           $edge_src = $object->getPHID();
 
           $old_edges = id(new PhabricatorEdgeQuery())
             ->withSourcePHIDs(array($edge_src))
             ->withEdgeTypes(array($edge_type))
             ->needEdgeData(true)
             ->execute();
 
           $old_edges = $old_edges[$edge_src][$edge_type];
         }
         return $old_edges;
       case PhabricatorTransactions::TYPE_CUSTOMFIELD:
         // NOTE: Custom fields have their old value pre-populated when they are
         // built by PhabricatorCustomFieldList.
         return $xaction->getOldValue();
       case PhabricatorTransactions::TYPE_COMMENT:
         return null;
       default:
         return $this->getCustomTransactionOldValue($object, $xaction);
     }
   }
 
   private function getTransactionNewValue(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     switch ($xaction->getTransactionType()) {
       case PhabricatorTransactions::TYPE_SUBSCRIBERS:
         return $this->getPHIDTransactionNewValue($xaction);
       case PhabricatorTransactions::TYPE_VIEW_POLICY:
       case PhabricatorTransactions::TYPE_EDIT_POLICY:
       case PhabricatorTransactions::TYPE_JOIN_POLICY:
       case PhabricatorTransactions::TYPE_BUILDABLE:
       case PhabricatorTransactions::TYPE_TOKEN:
         return $xaction->getNewValue();
       case PhabricatorTransactions::TYPE_EDGE:
         return $this->getEdgeTransactionNewValue($xaction);
       case PhabricatorTransactions::TYPE_CUSTOMFIELD:
         $field = $this->getCustomFieldForTransaction($object, $xaction);
         return $field->getNewValueFromApplicationTransactions($xaction);
       case PhabricatorTransactions::TYPE_COMMENT:
         return null;
       default:
         return $this->getCustomTransactionNewValue($object, $xaction);
     }
   }
 
   protected function getCustomTransactionOldValue(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     throw new Exception('Capability not supported!');
   }
 
   protected function getCustomTransactionNewValue(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     throw new Exception('Capability not supported!');
   }
 
   protected function transactionHasEffect(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
 
     switch ($xaction->getTransactionType()) {
       case PhabricatorTransactions::TYPE_COMMENT:
         return $xaction->hasComment();
       case PhabricatorTransactions::TYPE_CUSTOMFIELD:
         $field = $this->getCustomFieldForTransaction($object, $xaction);
         return $field->getApplicationTransactionHasEffect($xaction);
       case PhabricatorTransactions::TYPE_EDGE:
         // A straight value comparison here doesn't always get the right
         // result, because newly added edges aren't fully populated. Instead,
         // compare the changes in a more granular way.
         $old = $xaction->getOldValue();
         $new = $xaction->getNewValue();
 
         $old_dst = array_keys($old);
         $new_dst = array_keys($new);
 
         // NOTE: For now, we don't consider edge reordering to be a change.
         // We have very few order-dependent edges and effectively no order
         // oriented UI. This might change in the future.
         sort($old_dst);
         sort($new_dst);
 
         if ($old_dst !== $new_dst) {
           // We've added or removed edges, so this transaction definitely
           // has an effect.
           return true;
         }
 
         // We haven't added or removed edges, but we might have changed
         // edge data.
         foreach ($old as $key => $old_value) {
           $new_value = $new[$key];
           if ($old_value['data'] !== $new_value['data']) {
             return true;
           }
         }
 
         return false;
     }
 
     return ($xaction->getOldValue() !== $xaction->getNewValue());
   }
 
   protected function shouldApplyInitialEffects(
     PhabricatorLiskDAO $object,
     array $xactions) {
     return false;
   }
 
   protected function applyInitialEffects(
     PhabricatorLiskDAO $object,
     array $xactions) {
     throw new PhutilMethodNotImplementedException();
   }
 
   private function applyInternalEffects(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
 
     switch ($xaction->getTransactionType()) {
       case PhabricatorTransactions::TYPE_BUILDABLE:
       case PhabricatorTransactions::TYPE_TOKEN:
         return;
       case PhabricatorTransactions::TYPE_VIEW_POLICY:
         $object->setViewPolicy($xaction->getNewValue());
         break;
       case PhabricatorTransactions::TYPE_EDIT_POLICY:
         $object->setEditPolicy($xaction->getNewValue());
         break;
       case PhabricatorTransactions::TYPE_CUSTOMFIELD:
         $field = $this->getCustomFieldForTransaction($object, $xaction);
         return $field->applyApplicationTransactionInternalEffects($xaction);
     }
 
     return $this->applyCustomInternalTransaction($object, $xaction);
   }
 
   private function applyExternalEffects(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     switch ($xaction->getTransactionType()) {
       case PhabricatorTransactions::TYPE_BUILDABLE:
       case PhabricatorTransactions::TYPE_TOKEN:
         return;
       case PhabricatorTransactions::TYPE_SUBSCRIBERS:
         $subeditor = id(new PhabricatorSubscriptionsEditor())
           ->setObject($object)
           ->setActor($this->requireActor());
 
         $old_map = array_fuse($xaction->getOldValue());
         $new_map = array_fuse($xaction->getNewValue());
 
         $subeditor->unsubscribe(
           array_keys(
             array_diff_key($old_map, $new_map)));
 
         $subeditor->subscribeExplicit(
           array_keys(
             array_diff_key($new_map, $old_map)));
 
         $subeditor->save();
 
         // for the rest of these edits, subscribers should include those just
         // added as well as those just removed.
         $subscribers = array_unique(array_merge(
           $this->subscribers,
           $xaction->getOldValue(),
           $xaction->getNewValue()));
         $this->subscribers = $subscribers;
 
         break;
       case PhabricatorTransactions::TYPE_EDGE:
         if ($this->getIsInverseEdgeEditor()) {
           // If we're writing an inverse edge transaction, don't actually
           // do anything. The initiating editor on the other side of the
           // transaction will take care of the edge writes.
           break;
         }
 
         $old = $xaction->getOldValue();
         $new = $xaction->getNewValue();
         $src = $object->getPHID();
         $const = $xaction->getMetadataValue('edge:type');
 
         $type = PhabricatorEdgeType::getByConstant($const);
         if ($type->shouldWriteInverseTransactions()) {
           $this->applyInverseEdgeTransactions(
             $object,
             $xaction,
             $type->getInverseEdgeConstant());
         }
 
         foreach ($new as $dst_phid => $edge) {
           $new[$dst_phid]['src'] = $src;
         }
 
         $editor = new PhabricatorEdgeEditor();
 
         foreach ($old as $dst_phid => $edge) {
           if (!empty($new[$dst_phid])) {
             if ($old[$dst_phid]['data'] === $new[$dst_phid]['data']) {
               continue;
             }
           }
           $editor->removeEdge($src, $const, $dst_phid);
         }
 
         foreach ($new as $dst_phid => $edge) {
           if (!empty($old[$dst_phid])) {
             if ($old[$dst_phid]['data'] === $new[$dst_phid]['data']) {
               continue;
             }
           }
 
           $data = array(
             'data' => $edge['data'],
           );
 
           $editor->addEdge($src, $const, $dst_phid, $data);
         }
 
         $editor->save();
         break;
       case PhabricatorTransactions::TYPE_CUSTOMFIELD:
         $field = $this->getCustomFieldForTransaction($object, $xaction);
         return $field->applyApplicationTransactionExternalEffects($xaction);
     }
 
     return $this->applyCustomExternalTransaction($object, $xaction);
   }
 
   protected function applyCustomInternalTransaction(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     $type = $xaction->getTransactionType();
     throw new Exception(
       "Transaction type '{$type}' is missing an internal apply ".
       "implementation!");
   }
 
   protected function applyCustomExternalTransaction(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     $type = $xaction->getTransactionType();
     throw new Exception(
       "Transaction type '{$type}' is missing an external apply ".
       "implementation!");
   }
 
   /**
    * Fill in a transaction's common values, like author and content source.
    */
   protected function populateTransaction(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
 
     $actor = $this->getActor();
 
     // TODO: This needs to be more sophisticated once we have meta-policies.
     $xaction->setViewPolicy(PhabricatorPolicies::POLICY_PUBLIC);
 
     if ($actor->isOmnipotent()) {
       $xaction->setEditPolicy(PhabricatorPolicies::POLICY_NOONE);
     } else {
       $xaction->setEditPolicy($this->getActingAsPHID());
     }
 
     $xaction->setAuthorPHID($this->getActingAsPHID());
     $xaction->setContentSource($this->getContentSource());
     $xaction->attachViewer($actor);
     $xaction->attachObject($object);
 
     if ($object->getPHID()) {
       $xaction->setObjectPHID($object->getPHID());
     }
 
     return $xaction;
   }
 
 
   protected function applyFinalEffects(
     PhabricatorLiskDAO $object,
     array $xactions) {
     return $xactions;
   }
 
   public function setContentSource(PhabricatorContentSource $content_source) {
     $this->contentSource = $content_source;
     return $this;
   }
 
   public function setContentSourceFromRequest(AphrontRequest $request) {
     return $this->setContentSource(
       PhabricatorContentSource::newFromRequest($request));
   }
 
   public function setContentSourceFromConduitRequest(
     ConduitAPIRequest $request) {
 
     $content_source = PhabricatorContentSource::newForSource(
       PhabricatorContentSource::SOURCE_CONDUIT,
       array());
 
     return $this->setContentSource($content_source);
   }
 
   public function getContentSource() {
     return $this->contentSource;
   }
 
   final public function applyTransactions(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     $this->object = $object;
     $this->xactions = $xactions;
     $this->isNewObject = ($object->getPHID() === null);
 
     $this->validateEditParameters($object, $xactions);
 
     $actor = $this->requireActor();
 
     // NOTE: Some transaction expansion requires that the edited object be
     // attached.
     foreach ($xactions as $xaction) {
       $xaction->attachObject($object);
       $xaction->attachViewer($actor);
     }
 
     $xactions = $this->expandTransactions($object, $xactions);
     $xactions = $this->expandSupportTransactions($object, $xactions);
     $xactions = $this->combineTransactions($xactions);
 
     foreach ($xactions as $xaction) {
       $xaction = $this->populateTransaction($object, $xaction);
     }
 
     $is_preview = $this->getIsPreview();
     $read_locking = false;
     $transaction_open = false;
 
     if (!$is_preview) {
       $errors = array();
       $type_map = mgroup($xactions, 'getTransactionType');
       foreach ($this->getTransactionTypes() as $type) {
         $type_xactions = idx($type_map, $type, array());
         $errors[] = $this->validateTransaction($object, $type, $type_xactions);
       }
 
       $errors = array_mergev($errors);
 
       $continue_on_missing = $this->getContinueOnMissingFields();
       foreach ($errors as $key => $error) {
         if ($continue_on_missing && $error->getIsMissingFieldError()) {
           unset($errors[$key]);
         }
       }
 
       if ($errors) {
         throw new PhabricatorApplicationTransactionValidationException($errors);
       }
 
       $file_phids = $this->extractFilePHIDs($object, $xactions);
 
       if ($object->getID()) {
         foreach ($xactions as $xaction) {
 
           // If any of the transactions require a read lock, hold one and
           // reload the object. We need to do this fairly early so that the
           // call to `adjustTransactionValues()` (which populates old values)
           // is based on the synchronized state of the object, which may differ
           // from the state when it was originally loaded.
 
           if ($this->shouldReadLock($object, $xaction)) {
             $object->openTransaction();
             $object->beginReadLocking();
             $transaction_open = true;
             $read_locking = true;
             $object->reload();
             break;
           }
         }
       }
 
       if ($this->shouldApplyInitialEffects($object, $xactions)) {
         if (!$transaction_open) {
           $object->openTransaction();
           $transaction_open = true;
         }
       }
     }
 
     if ($this->shouldApplyInitialEffects($object, $xactions)) {
       $this->applyInitialEffects($object, $xactions);
     }
 
     foreach ($xactions as $xaction) {
       $this->adjustTransactionValues($object, $xaction);
     }
 
     $xactions = $this->filterTransactions($object, $xactions);
 
     if (!$xactions) {
       if ($read_locking) {
         $object->endReadLocking();
         $read_locking = false;
       }
       if ($transaction_open) {
         $object->killTransaction();
         $transaction_open = false;
       }
       return array();
     }
 
     // Now that we've merged, filtered, and combined transactions, check for
     // required capabilities.
     foreach ($xactions as $xaction) {
       $this->requireCapabilities($object, $xaction);
     }
 
     $xactions = $this->sortTransactions($xactions);
 
     if ($is_preview) {
       $this->loadHandles($xactions);
       return $xactions;
     }
 
     $comment_editor = id(new PhabricatorApplicationTransactionCommentEditor())
       ->setActor($actor)
       ->setActingAsPHID($this->getActingAsPHID())
       ->setContentSource($this->getContentSource());
 
     if (!$transaction_open) {
       $object->openTransaction();
     }
 
       foreach ($xactions as $xaction) {
         $this->applyInternalEffects($object, $xaction);
       }
 
       $object->save();
 
       foreach ($xactions as $xaction) {
         $xaction->setObjectPHID($object->getPHID());
         if ($xaction->getComment()) {
           $xaction->setPHID($xaction->generatePHID());
           $comment_editor->applyEdit($xaction, $xaction->getComment());
         } else {
           $xaction->save();
         }
       }
 
       if ($file_phids) {
         $this->attachFiles($object, $file_phids);
       }
 
       foreach ($xactions as $xaction) {
         $this->applyExternalEffects($object, $xaction);
       }
 
       $xactions = $this->applyFinalEffects($object, $xactions);
 
       if ($read_locking) {
         $object->endReadLocking();
         $read_locking = false;
       }
 
     $object->saveTransaction();
 
     // Now that we've completely applied the core transaction set, try to apply
     // Herald rules. Herald rules are allowed to either take direct actions on
     // the database (like writing flags), or take indirect actions (like saving
     // some targets for CC when we generate mail a little later), or return
     // transactions which we'll apply normally using another Editor.
 
     // First, check if *this* is a sub-editor which is itself applying Herald
     // rules: if it is, stop working and return so we don't descend into
     // madness.
 
     // Otherwise, we're not a Herald editor, so process Herald rules (possibly
     // using a Herald editor to apply resulting transactions) and then send out
     // mail, notifications, and feed updates about everything.
 
     if ($this->getIsHeraldEditor()) {
       // We are the Herald editor, so stop work here and return the updated
       // transactions.
       return $xactions;
     } else if ($this->shouldApplyHeraldRules($object, $xactions)) {
       // We are not the Herald editor, so try to apply Herald rules.
       $herald_xactions = $this->applyHeraldRules($object, $xactions);
 
       if ($herald_xactions) {
         $xscript_id = $this->getHeraldTranscript()->getID();
         foreach ($herald_xactions as $herald_xaction) {
           $herald_xaction->setMetadataValue('herald:transcriptID', $xscript_id);
         }
 
         // NOTE: We're acting as the omnipotent user because rules deal with
         // their own policy issues. We use a synthetic author PHID (the
         // Herald application) as the author of record, so that transactions
         // will render in a reasonable way ("Herald assigned this task ...").
         $herald_actor = PhabricatorUser::getOmnipotentUser();
         $herald_phid = id(new PhabricatorHeraldApplication())->getPHID();
 
         // TODO: It would be nice to give transactions a more specific source
         // which points at the rule which generated them. You can figure this
         // out from transcripts, but it would be cleaner if you didn't have to.
 
         $herald_source = PhabricatorContentSource::newForSource(
           PhabricatorContentSource::SOURCE_HERALD,
           array());
 
         $herald_editor = newv(get_class($this), array())
           ->setContinueOnNoEffect(true)
           ->setContinueOnMissingFields(true)
           ->setParentMessageID($this->getParentMessageID())
           ->setIsHeraldEditor(true)
           ->setActor($herald_actor)
           ->setActingAsPHID($herald_phid)
           ->setContentSource($herald_source);
 
         $herald_xactions = $herald_editor->applyTransactions(
           $object,
           $herald_xactions);
 
         // Merge the new transactions into the transaction list: we want to
         // send email and publish feed stories about them, too.
         $xactions = array_merge($xactions, $herald_xactions);
       }
     }
 
     // Before sending mail or publishing feed stories, reload the object
     // subscribers to pick up changes caused by Herald (or by other side effects
     // in various transaction phases).
     $this->loadSubscribers($object);
 
     $this->loadHandles($xactions);
 
     $mail = null;
     if (!$this->getDisableEmail()) {
       if ($this->shouldSendMail($object, $xactions)) {
         $mail = $this->sendMail($object, $xactions);
       }
     }
 
     if ($this->supportsSearch()) {
       id(new PhabricatorSearchIndexer())
         ->queueDocumentForIndexing($object->getPHID());
     }
 
     if ($this->shouldPublishFeedStory($object, $xactions)) {
       $mailed = array();
       if ($mail) {
         $mailed = $mail->buildRecipientList();
       }
       $this->publishFeedStory(
         $object,
         $xactions,
         $mailed);
     }
 
     $this->didApplyTransactions($xactions);
 
     if ($object instanceof PhabricatorCustomFieldInterface) {
       // Maybe this makes more sense to move into the search index itself? For
       // now I'm putting it here since I think we might end up with things that
       // need it to be up to date once the next page loads, but if we don't go
       // there we we could move it into search once search moves to the daemons.
 
       // It now happens in the search indexer as well, but the search indexer is
       // always daemonized, so the logic above still potentially holds. We could
       // possibly get rid of this. The major motivation for putting it in the
       // indexer was to enable reindexing to work.
 
       $fields = PhabricatorCustomField::getObjectFields(
         $object,
         PhabricatorCustomField::ROLE_APPLICATIONSEARCH);
       $fields->readFieldsFromStorage($object);
       $fields->rebuildIndexes($object);
     }
 
     return $xactions;
   }
 
   protected function didApplyTransactions(array $xactions) {
     // Hook for subclasses.
     return;
   }
 
 
   /**
    * Determine if the editor should hold a read lock on the object while
    * applying a transaction.
    *
    * If the editor does not hold a lock, two editors may read an object at the
    * same time, then apply their changes without any synchronization. For most
    * transactions, this does not matter much. However, it is important for some
    * transactions. For example, if an object has a transaction count on it, both
    * editors may read the object with `count = 23`, then independently update it
    * and save the object with `count = 24` twice. This will produce the wrong
    * state: the object really has 25 transactions, but the count is only 24.
    *
    * Generally, transactions fall into one of four buckets:
    *
    *   - Append operations: Actions like adding a comment to an object purely
    *     add information to its state, and do not depend on the current object
    *     state in any way. These transactions never need to hold locks.
    *   - Overwrite operations: Actions like changing the title or description
    *     of an object replace the current value with a new value, so the end
    *     state is consistent without a lock. We currently do not lock these
    *     transactions, although we may in the future.
    *   - Edge operations: Edge and subscription operations have internal
    *     synchronization which limits the damage race conditions can cause.
    *     We do not currently lock these transactions, although we may in the
    *     future.
    *   - Update operations: Actions like incrementing a count on an object.
    *     These operations generally should use locks, unless it is not
    *     important that the state remain consistent in the presence of races.
    *
    * @param   PhabricatorLiskDAO  Object being updated.
    * @param   PhabricatorApplicationTransaction Transaction being applied.
    * @return  bool                True to synchronize the edit with a lock.
    */
   protected function shouldReadLock(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     return false;
   }
 
   private function loadHandles(array $xactions) {
     $phids = array();
     foreach ($xactions as $key => $xaction) {
       $phids[$key] = $xaction->getRequiredHandlePHIDs();
     }
     $handles = array();
     $merged = array_mergev($phids);
     if ($merged) {
       $handles = id(new PhabricatorHandleQuery())
         ->setViewer($this->requireActor())
         ->withPHIDs($merged)
         ->execute();
     }
     foreach ($xactions as $key => $xaction) {
       $xaction->setHandles(array_select_keys($handles, $phids[$key]));
     }
   }
 
   private function loadSubscribers(PhabricatorLiskDAO $object) {
     if ($object->getPHID() &&
         ($object instanceof PhabricatorSubscribableInterface)) {
       $subs = PhabricatorSubscribersQuery::loadSubscribersForPHID(
         $object->getPHID());
       $this->subscribers = array_fuse($subs);
     } else {
       $this->subscribers = array();
     }
   }
 
   private function validateEditParameters(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     if (!$this->getContentSource()) {
       throw new Exception(
         'Call setContentSource() before applyTransactions()!');
     }
 
     // Do a bunch of sanity checks that the incoming transactions are fresh.
     // They should be unsaved and have only "transactionType" and "newValue"
     // set.
 
     $types = array_fill_keys($this->getTransactionTypes(), true);
 
     assert_instances_of($xactions, 'PhabricatorApplicationTransaction');
     foreach ($xactions as $xaction) {
       if ($xaction->getPHID() || $xaction->getID()) {
         throw new PhabricatorApplicationTransactionStructureException(
           $xaction,
           pht(
             'You can not apply transactions which already have IDs/PHIDs!'));
       }
       if ($xaction->getObjectPHID()) {
         throw new PhabricatorApplicationTransactionStructureException(
           $xaction,
           pht(
             'You can not apply transactions which already have objectPHIDs!'));
       }
       if ($xaction->getAuthorPHID()) {
         throw new PhabricatorApplicationTransactionStructureException(
           $xaction,
           pht(
             'You can not apply transactions which already have authorPHIDs!'));
       }
       if ($xaction->getCommentPHID()) {
         throw new PhabricatorApplicationTransactionStructureException(
           $xaction,
           pht(
             'You can not apply transactions which already have '.
             'commentPHIDs!'));
       }
       if ($xaction->getCommentVersion() !== 0) {
         throw new PhabricatorApplicationTransactionStructureException(
           $xaction,
           pht(
             'You can not apply transactions which already have '.
             'commentVersions!'));
       }
 
       $expect_value = !$xaction->shouldGenerateOldValue();
       $has_value = $xaction->hasOldValue();
 
       if ($expect_value && !$has_value) {
         throw new PhabricatorApplicationTransactionStructureException(
           $xaction,
           pht(
             'This transaction is supposed to have an oldValue set, but '.
             'it does not!'));
       }
 
       if ($has_value && !$expect_value) {
         throw new PhabricatorApplicationTransactionStructureException(
           $xaction,
           pht(
             'This transaction should generate its oldValue automatically, '.
             'but has already had one set!'));
       }
 
       $type = $xaction->getTransactionType();
       if (empty($types[$type])) {
         throw new PhabricatorApplicationTransactionStructureException(
           $xaction,
           pht(
             'Transaction has type "%s", but that transaction type is not '.
             'supported by this editor (%s).',
             $type,
             get_class($this)));
       }
     }
   }
 
   protected function requireCapabilities(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
 
     if ($this->getIsNewObject()) {
       return;
     }
 
     $actor = $this->requireActor();
     switch ($xaction->getTransactionType()) {
       case PhabricatorTransactions::TYPE_COMMENT:
         PhabricatorPolicyFilter::requireCapability(
           $actor,
           $object,
           PhabricatorPolicyCapability::CAN_VIEW);
         break;
       case PhabricatorTransactions::TYPE_VIEW_POLICY:
         PhabricatorPolicyFilter::requireCapability(
           $actor,
           $object,
           PhabricatorPolicyCapability::CAN_EDIT);
         break;
       case PhabricatorTransactions::TYPE_EDIT_POLICY:
         PhabricatorPolicyFilter::requireCapability(
           $actor,
           $object,
           PhabricatorPolicyCapability::CAN_EDIT);
         break;
       case PhabricatorTransactions::TYPE_JOIN_POLICY:
         PhabricatorPolicyFilter::requireCapability(
           $actor,
           $object,
           PhabricatorPolicyCapability::CAN_EDIT);
         break;
     }
   }
 
   private function buildSubscribeTransaction(
     PhabricatorLiskDAO $object,
     array $xactions,
     array $blocks) {
 
     if (!($object instanceof PhabricatorSubscribableInterface)) {
       return null;
     }
 
     $texts = array_mergev($blocks);
     $phids = PhabricatorMarkupEngine::extractPHIDsFromMentions(
       $this->getActor(),
       $texts);
 
     $this->mentionedPHIDs = $phids;
 
     if ($object->getPHID()) {
       // Don't try to subscribe already-subscribed mentions: we want to generate
       // a dialog about an action having no effect if the user explicitly adds
       // existing CCs, but not if they merely mention existing subscribers.
       $phids = array_diff($phids, $this->subscribers);
     }
 
     foreach ($phids as $key => $phid) {
       if ($object->isAutomaticallySubscribed($phid)) {
         unset($phids[$key]);
       }
     }
     $phids = array_values($phids);
 
     if (!$phids) {
       return null;
     }
 
     $xaction = newv(get_class(head($xactions)), array());
     $xaction->setTransactionType(PhabricatorTransactions::TYPE_SUBSCRIBERS);
     $xaction->setNewValue(array('+' => $phids));
 
     return $xaction;
   }
 
   protected function getRemarkupBlocksFromTransaction(
     PhabricatorApplicationTransaction $transaction) {
     return $transaction->getRemarkupBlocks();
   }
 
   protected function mergeTransactions(
     PhabricatorApplicationTransaction $u,
     PhabricatorApplicationTransaction $v) {
 
     $type = $u->getTransactionType();
 
     switch ($type) {
       case PhabricatorTransactions::TYPE_SUBSCRIBERS:
         return $this->mergePHIDOrEdgeTransactions($u, $v);
       case PhabricatorTransactions::TYPE_EDGE:
         $u_type = $u->getMetadataValue('edge:type');
         $v_type = $v->getMetadataValue('edge:type');
         if ($u_type == $v_type) {
           return $this->mergePHIDOrEdgeTransactions($u, $v);
         }
         return null;
     }
 
     // By default, do not merge the transactions.
     return null;
   }
 
   /**
    * Optionally expand transactions which imply other effects. For example,
    * resigning from a revision in Differential implies removing yourself as
    * a reviewer.
    */
   private function expandTransactions(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     $results = array();
     foreach ($xactions as $xaction) {
       foreach ($this->expandTransaction($object, $xaction) as $expanded) {
         $results[] = $expanded;
       }
     }
 
     return $results;
   }
 
   protected function expandTransaction(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     return array($xaction);
   }
 
 
   private function expandSupportTransactions(
     PhabricatorLiskDAO $object,
     array $xactions) {
     $this->loadSubscribers($object);
 
     $xactions = $this->applyImplicitCC($object, $xactions);
 
     $blocks = array();
     foreach ($xactions as $key => $xaction) {
       $blocks[$key] = $this->getRemarkupBlocksFromTransaction($xaction);
     }
 
     $subscribe_xaction = $this->buildSubscribeTransaction(
       $object,
       $xactions,
       $blocks);
     if ($subscribe_xaction) {
       $xactions[] = $subscribe_xaction;
     }
 
     // TODO: For now, this is just a placeholder.
     $engine = PhabricatorMarkupEngine::getEngine('extract');
     $engine->setConfig('viewer', $this->requireActor());
 
     $block_xactions = $this->expandRemarkupBlockTransactions(
       $object,
       $xactions,
       $blocks,
       $engine);
 
     foreach ($block_xactions as $xaction) {
       $xactions[] = $xaction;
     }
 
     return $xactions;
   }
 
   private function expandRemarkupBlockTransactions(
     PhabricatorLiskDAO $object,
     array $xactions,
     $blocks,
     PhutilMarkupEngine $engine) {
 
     $block_xactions = $this->expandCustomRemarkupBlockTransactions(
       $object,
       $xactions,
       $blocks,
       $engine);
 
     $mentioned_phids = array();
     foreach ($blocks as $key => $xaction_blocks) {
       foreach ($xaction_blocks as $block) {
         $engine->markupText($block);
         $mentioned_phids += $engine->getTextMetadata(
           PhabricatorObjectRemarkupRule::KEY_MENTIONED_OBJECTS,
           array());
       }
     }
 
     if (!$mentioned_phids) {
       return $block_xactions;
     }
 
     if ($object instanceof PhabricatorProjectInterface) {
       $phids = $mentioned_phids;
       $project_type = PhabricatorProjectProjectPHIDType::TYPECONST;
       foreach ($phids as $key => $phid) {
         if (phid_get_type($phid) != $project_type) {
           unset($phids[$key]);
         }
       }
 
       if ($phids) {
         $edge_type = PhabricatorProjectObjectHasProjectEdgeType::EDGECONST;
         $block_xactions[] = newv(get_class(head($xactions)), array())
           ->setIgnoreOnNoEffect(true)
           ->setTransactionType(PhabricatorTransactions::TYPE_EDGE)
           ->setMetadataValue('edge:type', $edge_type)
           ->setNewValue(array('+' => $phids));
       }
     }
 
     $mentioned_objects = id(new PhabricatorObjectQuery())
       ->setViewer($this->getActor())
       ->withPHIDs($mentioned_phids)
       ->execute();
 
     $mentionable_phids = array();
     foreach ($mentioned_objects as $mentioned_object) {
       if ($mentioned_object instanceof PhabricatorMentionableInterface) {
         $mentioned_phid = $mentioned_object->getPHID();
         if (idx($this->getUnmentionablePHIDMap(), $mentioned_phid)) {
           continue;
         }
         // don't let objects mention themselves
         if ($object->getPHID() && $mentioned_phid == $object->getPHID()) {
           continue;
         }
         $mentionable_phids[$mentioned_phid] = $mentioned_phid;
       }
     }
     if ($mentionable_phids) {
       $edge_type = PhabricatorObjectMentionsObject::EDGECONST;
       $block_xactions[] = newv(get_class(head($xactions)), array())
         ->setIgnoreOnNoEffect(true)
         ->setTransactionType(PhabricatorTransactions::TYPE_EDGE)
         ->setMetadataValue('edge:type', $edge_type)
         ->setNewValue(array('+' => $mentionable_phids));
     }
 
     return $block_xactions;
   }
 
   protected function expandCustomRemarkupBlockTransactions(
     PhabricatorLiskDAO $object,
     array $xactions,
     $blocks,
     PhutilMarkupEngine $engine) {
     return array();
   }
 
 
   /**
    * Attempt to combine similar transactions into a smaller number of total
    * transactions. For example, two transactions which edit the title of an
    * object can be merged into a single edit.
    */
   private function combineTransactions(array $xactions) {
     $stray_comments = array();
 
     $result = array();
     $types = array();
     foreach ($xactions as $key => $xaction) {
       $type = $xaction->getTransactionType();
       if (isset($types[$type])) {
         foreach ($types[$type] as $other_key) {
           $merged = $this->mergeTransactions($result[$other_key], $xaction);
           if ($merged) {
             $result[$other_key] = $merged;
 
             if ($xaction->getComment() &&
                 ($xaction->getComment() !== $merged->getComment())) {
               $stray_comments[] = $xaction->getComment();
             }
 
             if ($result[$other_key]->getComment() &&
                 ($result[$other_key]->getComment() !== $merged->getComment())) {
               $stray_comments[] = $result[$other_key]->getComment();
             }
 
             // Move on to the next transaction.
             continue 2;
           }
         }
       }
       $result[$key] = $xaction;
       $types[$type][] = $key;
     }
 
     // If we merged any comments away, restore them.
     foreach ($stray_comments as $comment) {
       $xaction = newv(get_class(head($result)), array());
       $xaction->setTransactionType(PhabricatorTransactions::TYPE_COMMENT);
       $xaction->setComment($comment);
       $result[] = $xaction;
     }
 
     return array_values($result);
   }
 
   protected function mergePHIDOrEdgeTransactions(
     PhabricatorApplicationTransaction $u,
     PhabricatorApplicationTransaction $v) {
 
     $result = $u->getNewValue();
     foreach ($v->getNewValue() as $key => $value) {
       if ($u->getTransactionType() == PhabricatorTransactions::TYPE_EDGE) {
         if (empty($result[$key])) {
           $result[$key] = $value;
         } else {
           // We're merging two lists of edge adds, sets, or removes. Merge
           // them by merging individual PHIDs within them.
           $merged = $result[$key];
 
           foreach ($value as $dst => $v_spec) {
             if (empty($merged[$dst])) {
               $merged[$dst] = $v_spec;
             } else {
               // Two transactions are trying to perform the same operation on
               // the same edge. Normalize the edge data and then merge it. This
               // allows transactions to specify how data merges execute in a
               // precise way.
 
               $u_spec = $merged[$dst];
 
               if (!is_array($u_spec)) {
                 $u_spec = array('dst' => $u_spec);
               }
               if (!is_array($v_spec)) {
                 $v_spec = array('dst' => $v_spec);
               }
 
               $ux_data = idx($u_spec, 'data', array());
               $vx_data = idx($v_spec, 'data', array());
 
               $merged_data = $this->mergeEdgeData(
                 $u->getMetadataValue('edge:type'),
                 $ux_data,
                 $vx_data);
 
               $u_spec['data'] = $merged_data;
               $merged[$dst] = $u_spec;
             }
           }
 
           $result[$key] = $merged;
         }
       } else {
         $result[$key] = array_merge($value, idx($result, $key, array()));
       }
     }
     $u->setNewValue($result);
 
     // When combining an "ignore" transaction with a normal transaction, make
     // sure we don't propagate the "ignore" flag.
     if (!$v->getIgnoreOnNoEffect()) {
       $u->setIgnoreOnNoEffect(false);
     }
 
     return $u;
   }
 
   protected function mergeEdgeData($type, array $u, array $v) {
     return $v + $u;
   }
 
   protected function getPHIDTransactionNewValue(
     PhabricatorApplicationTransaction $xaction) {
 
     $old = array_fuse($xaction->getOldValue());
 
     $new = $xaction->getNewValue();
     $new_add = idx($new, '+', array());
     unset($new['+']);
     $new_rem = idx($new, '-', array());
     unset($new['-']);
     $new_set = idx($new, '=', null);
     if ($new_set !== null) {
       $new_set = array_fuse($new_set);
     }
     unset($new['=']);
 
     if ($new) {
       throw new Exception(
         "Invalid 'new' value for PHID transaction. Value should contain only ".
         "keys '+' (add PHIDs), '-' (remove PHIDs) and '=' (set PHIDS).");
     }
 
     $result = array();
 
     foreach ($old as $phid) {
       if ($new_set !== null && empty($new_set[$phid])) {
         continue;
       }
       $result[$phid] = $phid;
     }
 
     if ($new_set !== null) {
       foreach ($new_set as $phid) {
         $result[$phid] = $phid;
       }
     }
 
     foreach ($new_add as $phid) {
       $result[$phid] = $phid;
     }
 
     foreach ($new_rem as $phid) {
       unset($result[$phid]);
     }
 
     return array_values($result);
   }
 
   protected function getEdgeTransactionNewValue(
     PhabricatorApplicationTransaction $xaction) {
 
     $new = $xaction->getNewValue();
     $new_add = idx($new, '+', array());
     unset($new['+']);
     $new_rem = idx($new, '-', array());
     unset($new['-']);
     $new_set = idx($new, '=', null);
     unset($new['=']);
 
     if ($new) {
       throw new Exception(
         "Invalid 'new' value for Edge transaction. Value should contain only ".
         "keys '+' (add edges), '-' (remove edges) and '=' (set edges).");
     }
 
     $old = $xaction->getOldValue();
 
     $lists = array($new_set, $new_add, $new_rem);
     foreach ($lists as $list) {
       $this->checkEdgeList($list);
     }
 
     $result = array();
     foreach ($old as $dst_phid => $edge) {
       if ($new_set !== null && empty($new_set[$dst_phid])) {
         continue;
       }
       $result[$dst_phid] = $this->normalizeEdgeTransactionValue(
         $xaction,
         $edge,
         $dst_phid);
     }
 
     if ($new_set !== null) {
       foreach ($new_set as $dst_phid => $edge) {
         $result[$dst_phid] = $this->normalizeEdgeTransactionValue(
           $xaction,
           $edge,
           $dst_phid);
       }
     }
 
     foreach ($new_add as $dst_phid => $edge) {
       $result[$dst_phid] = $this->normalizeEdgeTransactionValue(
         $xaction,
         $edge,
         $dst_phid);
     }
 
     foreach ($new_rem as $dst_phid => $edge) {
       unset($result[$dst_phid]);
     }
 
     return $result;
   }
 
   private function checkEdgeList($list) {
     if (!$list) {
       return;
     }
     foreach ($list as $key => $item) {
       if (phid_get_type($key) === PhabricatorPHIDConstants::PHID_TYPE_UNKNOWN) {
         throw new Exception(
           "Edge transactions must have destination PHIDs as in edge ".
           "lists (found key '{$key}').");
       }
       if (!is_array($item) && $item !== $key) {
         throw new Exception(
           "Edge transactions must have PHIDs or edge specs as values ".
           "(found value '{$item}').");
       }
     }
   }
 
   private function normalizeEdgeTransactionValue(
     PhabricatorApplicationTransaction $xaction,
     $edge,
     $dst_phid) {
 
     if (!is_array($edge)) {
       if ($edge != $dst_phid) {
         throw new Exception(
           pht(
             'Transaction edge data must either be the edge PHID or an edge '.
             'specification dictionary.'));
       }
       $edge = array();
     } else {
       foreach ($edge as $key => $value) {
         switch ($key) {
           case 'src':
           case 'dst':
           case 'type':
           case 'data':
           case 'dateCreated':
           case 'dateModified':
           case 'seq':
           case 'dataID':
             break;
           default:
             throw new Exception(
               pht(
                 'Transaction edge specification contains unexpected key '.
                 '"%s".',
                 $key));
         }
       }
     }
 
     $edge['dst'] = $dst_phid;
 
     $edge_type = $xaction->getMetadataValue('edge:type');
     if (empty($edge['type'])) {
       $edge['type'] = $edge_type;
     } else {
       if ($edge['type'] != $edge_type) {
         $this_type = $edge['type'];
         throw new Exception(
           "Edge transaction includes edge of type '{$this_type}', but ".
           "transaction is of type '{$edge_type}'. Each edge transaction must ".
           "alter edges of only one type.");
       }
     }
 
     if (!isset($edge['data'])) {
       $edge['data'] = array();
     }
 
     return $edge;
   }
 
   protected function sortTransactions(array $xactions) {
     $head = array();
     $tail = array();
 
     // Move bare comments to the end, so the actions precede them.
     foreach ($xactions as $xaction) {
       $type = $xaction->getTransactionType();
       if ($type == PhabricatorTransactions::TYPE_COMMENT) {
         $tail[] = $xaction;
       } else {
         $head[] = $xaction;
       }
     }
 
     return array_values(array_merge($head, $tail));
   }
 
 
   protected function filterTransactions(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     $type_comment = PhabricatorTransactions::TYPE_COMMENT;
 
     $no_effect = array();
     $has_comment = false;
     $any_effect = false;
     foreach ($xactions as $key => $xaction) {
       if ($this->transactionHasEffect($object, $xaction)) {
         if ($xaction->getTransactionType() != $type_comment) {
           $any_effect = true;
         }
       } else if ($xaction->getIgnoreOnNoEffect()) {
         unset($xactions[$key]);
       } else {
         $no_effect[$key] = $xaction;
       }
       if ($xaction->hasComment()) {
         $has_comment = true;
       }
     }
 
     if (!$no_effect) {
       return $xactions;
     }
 
     if (!$this->getContinueOnNoEffect() && !$this->getIsPreview()) {
       throw new PhabricatorApplicationTransactionNoEffectException(
         $no_effect,
         $any_effect,
         $has_comment);
     }
 
     if (!$any_effect && !$has_comment) {
       // If we only have empty comment transactions, just drop them all.
       return array();
     }
 
     foreach ($no_effect as $key => $xaction) {
       if ($xaction->getComment()) {
         $xaction->setTransactionType($type_comment);
         $xaction->setOldValue(null);
         $xaction->setNewValue(null);
       } else {
         unset($xactions[$key]);
       }
     }
 
     return $xactions;
   }
 
 
   /**
    * Hook for validating transactions. This callback will be invoked for each
    * available transaction type, even if an edit does not apply any transactions
    * of that type. This allows you to raise exceptions when required fields are
    * missing, by detecting that the object has no field value and there is no
    * transaction which sets one.
    *
    * @param PhabricatorLiskDAO Object being edited.
    * @param string Transaction type to validate.
    * @param list<PhabricatorApplicationTransaction> Transactions of given type,
    *   which may be empty if the edit does not apply any transactions of the
    *   given type.
    * @return list<PhabricatorApplicationTransactionValidationError> List of
    *   validation errors.
    */
   protected function validateTransaction(
     PhabricatorLiskDAO $object,
     $type,
     array $xactions) {
 
     $errors = array();
     switch ($type) {
       case PhabricatorTransactions::TYPE_VIEW_POLICY:
         $errors[] = $this->validatePolicyTransaction(
           $object,
           $xactions,
           $type,
           PhabricatorPolicyCapability::CAN_VIEW);
         break;
       case PhabricatorTransactions::TYPE_EDIT_POLICY:
         $errors[] = $this->validatePolicyTransaction(
           $object,
           $xactions,
           $type,
           PhabricatorPolicyCapability::CAN_EDIT);
         break;
       case PhabricatorTransactions::TYPE_CUSTOMFIELD:
         $groups = array();
         foreach ($xactions as $xaction) {
           $groups[$xaction->getMetadataValue('customfield:key')][] = $xaction;
         }
 
         $field_list = PhabricatorCustomField::getObjectFields(
           $object,
           PhabricatorCustomField::ROLE_EDIT);
         $field_list->setViewer($this->getActor());
 
         $role_xactions = PhabricatorCustomField::ROLE_APPLICATIONTRANSACTIONS;
         foreach ($field_list->getFields() as $field) {
           if (!$field->shouldEnableForRole($role_xactions)) {
             continue;
           }
           $errors[] = $field->validateApplicationTransactions(
             $this,
             $type,
             idx($groups, $field->getFieldKey(), array()));
         }
         break;
     }
 
     return array_mergev($errors);
   }
 
   private function validatePolicyTransaction(
     PhabricatorLiskDAO $object,
     array $xactions,
     $transaction_type,
     $capability) {
 
     $actor = $this->requireActor();
     $errors = array();
     // Note $this->xactions is necessary; $xactions is $this->xactions of
     // $transaction_type
     $policy_object = $this->adjustObjectForPolicyChecks(
       $object,
       $this->xactions);
 
     // Make sure the user isn't editing away their ability to $capability this
     // object.
     foreach ($xactions as $xaction) {
       try {
         PhabricatorPolicyFilter::requireCapabilityWithForcedPolicy(
           $actor,
           $policy_object,
           $capability,
           $xaction->getNewValue());
       } catch (PhabricatorPolicyException $ex) {
         $errors[] = new PhabricatorApplicationTransactionValidationError(
           $transaction_type,
           pht('Invalid'),
           pht(
             'You can not select this %s policy, because you would no longer '.
             'be able to %s the object.',
             $capability,
             $capability),
           $xaction);
       }
     }
 
     if ($this->getIsNewObject()) {
       if (!$xactions) {
         $has_capability = PhabricatorPolicyFilter::hasCapability(
           $actor,
           $policy_object,
           $capability);
         if (!$has_capability) {
           $errors[] = new PhabricatorApplicationTransactionValidationError(
             $transaction_type,
             pht('Invalid'),
             pht('The selected %s policy excludes you. Choose a %s policy '.
                 'which allows you to %s the object.',
             $capability,
             $capability,
             $capability));
         }
       }
     }
 
     return $errors;
   }
 
   protected function adjustObjectForPolicyChecks(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     return clone $object;
   }
 
   /**
    * Check for a missing text field.
    *
    * A text field is missing if the object has no value and there are no
    * transactions which set a value, or if the transactions remove the value.
    * This method is intended to make implementing @{method:validateTransaction}
    * more convenient:
    *
    *   $missing = $this->validateIsEmptyTextField(
    *     $object->getName(),
    *     $xactions);
    *
    * This will return `true` if the net effect of the object and transactions
    * is an empty field.
    *
    * @param wild Current field value.
    * @param list<PhabricatorApplicationTransaction> Transactions editing the
    *          field.
    * @return bool True if the field will be an empty text field after edits.
    */
   protected function validateIsEmptyTextField($field_value, array $xactions) {
     if (strlen($field_value) && empty($xactions)) {
       return false;
     }
 
     if ($xactions && strlen(last($xactions)->getNewValue())) {
       return false;
     }
 
     return true;
   }
 
 
 /* -(  Implicit CCs  )------------------------------------------------------- */
 
 
   /**
    * When a user interacts with an object, we might want to add them to CC.
    */
   final public function applyImplicitCC(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     if (!($object instanceof PhabricatorSubscribableInterface)) {
       // If the object isn't subscribable, we can't CC them.
       return $xactions;
     }
 
     $actor_phid = $this->getActingAsPHID();
 
     $type_user = PhabricatorPeopleUserPHIDType::TYPECONST;
     if (phid_get_type($actor_phid) != $type_user) {
       // Transactions by application actors like Herald, Harbormaster and
       // Diffusion should not CC the applications.
       return $xactions;
     }
 
     if ($object->isAutomaticallySubscribed($actor_phid)) {
       // If they're auto-subscribed, don't CC them.
       return $xactions;
     }
 
     $should_cc = false;
     foreach ($xactions as $xaction) {
       if ($this->shouldImplyCC($object, $xaction)) {
         $should_cc = true;
         break;
       }
     }
 
     if (!$should_cc) {
       // Only some types of actions imply a CC (like adding a comment).
       return $xactions;
     }
 
     if ($object->getPHID()) {
       if (isset($this->subscribers[$actor_phid])) {
         // If the user is already subscribed, don't implicitly CC them.
         return $xactions;
       }
 
       $unsub = PhabricatorEdgeQuery::loadDestinationPHIDs(
         $object->getPHID(),
         PhabricatorEdgeConfig::TYPE_OBJECT_HAS_UNSUBSCRIBER);
       $unsub = array_fuse($unsub);
       if (isset($unsub[$actor_phid])) {
         // If the user has previously unsubscribed from this object explicitly,
         // don't implicitly CC them.
         return $xactions;
       }
     }
 
     $xaction = newv(get_class(head($xactions)), array());
     $xaction->setTransactionType(PhabricatorTransactions::TYPE_SUBSCRIBERS);
     $xaction->setNewValue(array('+' => array($actor_phid)));
 
     array_unshift($xactions, $xaction);
 
     return $xactions;
   }
 
   protected function shouldImplyCC(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
 
     return $xaction->isCommentTransaction();
   }
 
 
 /* -(  Sending Mail  )------------------------------------------------------- */
 
 
   /**
    * @task mail
    */
   protected function shouldSendMail(
     PhabricatorLiskDAO $object,
     array $xactions) {
     return false;
   }
 
 
   /**
    * @task mail
    */
   protected function sendMail(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     // Check if any of the transactions are visible. If we don't have any
     // visible transactions, don't send the mail.
 
     $any_visible = false;
     foreach ($xactions as $xaction) {
       if (!$xaction->shouldHideForMail($xactions)) {
         $any_visible = true;
         break;
       }
     }
 
     if (!$any_visible) {
       return;
     }
 
     $email_to = array_filter(array_unique($this->getMailTo($object)));
     $email_cc = array_filter(array_unique($this->getMailCC($object)));
 
     $phids = array_merge($email_to, $email_cc);
     $handles = id(new PhabricatorHandleQuery())
       ->setViewer($this->requireActor())
       ->withPHIDs($phids)
       ->execute();
 
     $template = $this->buildMailTemplate($object);
     $body = $this->buildMailBody($object, $xactions);
 
     $mail_tags = $this->getMailTags($object, $xactions);
     $action = $this->getMailAction($object, $xactions);
 
     $reply_handler = $this->buildReplyHandler($object);
     $reply_section = $reply_handler->getReplyHandlerInstructions();
     if ($reply_section !== null) {
       $body->addReplySection($reply_section);
     }
 
+    $body->addEmailPreferenceSection();
+
     $template
       ->setFrom($this->getActingAsPHID())
       ->setSubjectPrefix($this->getMailSubjectPrefix())
       ->setVarySubjectPrefix('['.$action.']')
       ->setThreadID($this->getMailThreadID($object), $this->getIsNewObject())
       ->setRelatedPHID($object->getPHID())
       ->setExcludeMailRecipientPHIDs($this->getExcludeMailRecipientPHIDs())
       ->setMailTags($mail_tags)
       ->setIsBulk(true)
       ->setBody($body->render())
       ->setHTMLBody($body->renderHTML());
 
     foreach ($body->getAttachments() as $attachment) {
       $template->addAttachment($attachment);
     }
 
     $herald_xscript = $this->getHeraldTranscript();
     if ($herald_xscript) {
       $herald_header = $herald_xscript->getXHeraldRulesHeader();
       $herald_header = HeraldTranscript::saveXHeraldRulesHeader(
         $object->getPHID(),
         $herald_header);
     } else {
       $herald_header = HeraldTranscript::loadXHeraldRulesHeader(
         $object->getPHID());
     }
 
     if ($herald_header) {
       $template->addHeader('X-Herald-Rules', $herald_header);
     }
 
     if ($object instanceof PhabricatorProjectInterface) {
       $this->addMailProjectMetadata($object, $template);
     }
 
     if ($this->getParentMessageID()) {
       $template->setParentMessageID($this->getParentMessageID());
     }
 
     $mails = $reply_handler->multiplexMail(
       $template,
       array_select_keys($handles, $email_to),
       array_select_keys($handles, $email_cc));
 
     foreach ($mails as $mail) {
       $mail->saveAndSend();
     }
 
     $template->addTos($email_to);
     $template->addCCs($email_cc);
 
     return $template;
   }
 
   private function addMailProjectMetadata(
     PhabricatorLiskDAO $object,
     PhabricatorMetaMTAMail $template) {
 
     $project_phids = PhabricatorEdgeQuery::loadDestinationPHIDs(
       $object->getPHID(),
       PhabricatorProjectObjectHasProjectEdgeType::EDGECONST);
 
     if (!$project_phids) {
       return;
     }
 
     // TODO: This viewer isn't quite right. It would be slightly better to use
     // the mail recipient, but that's not very easy given the way rendering
     // works today.
 
     $handles = id(new PhabricatorHandleQuery())
       ->setViewer($this->requireActor())
       ->withPHIDs($project_phids)
       ->execute();
 
     $project_tags = array();
     foreach ($handles as $handle) {
       if (!$handle->isComplete()) {
         continue;
       }
       $project_tags[] = '<'.$handle->getObjectName().'>';
     }
 
     if (!$project_tags) {
       return;
     }
 
     $project_tags = implode(', ', $project_tags);
     $template->addHeader('X-Phabricator-Projects', $project_tags);
   }
 
 
   protected function getMailThreadID(PhabricatorLiskDAO $object) {
     return $object->getPHID();
   }
 
 
   /**
    * @task mail
    */
   protected function getStrongestAction(
     PhabricatorLiskDAO $object,
     array $xactions) {
     return last(msort($xactions, 'getActionStrength'));
   }
 
 
   /**
    * @task mail
    */
   protected function buildReplyHandler(PhabricatorLiskDAO $object) {
     throw new Exception('Capability not supported.');
   }
 
-
   /**
    * @task mail
    */
   protected function getMailSubjectPrefix() {
     throw new Exception('Capability not supported.');
   }
 
 
   /**
    * @task mail
    */
   protected function getMailTags(
     PhabricatorLiskDAO $object,
     array $xactions) {
     $tags = array();
 
     foreach ($xactions as $xaction) {
       $tags[] = $xaction->getMailTags();
     }
 
     return array_mergev($tags);
   }
 
   /**
    * @task mail
    */
   public function getMailTagsMap() {
     // TODO: We should move shared mail tags, like "comment", here.
     return array();
   }
 
 
   /**
    * @task mail
    */
   protected function getMailAction(
     PhabricatorLiskDAO $object,
     array $xactions) {
     return $this->getStrongestAction($object, $xactions)->getActionName();
   }
 
 
   /**
    * @task mail
    */
   protected function buildMailTemplate(PhabricatorLiskDAO $object) {
     throw new Exception('Capability not supported.');
   }
 
 
   /**
    * @task mail
    */
   protected function getMailTo(PhabricatorLiskDAO $object) {
     throw new Exception('Capability not supported.');
   }
 
 
   /**
    * @task mail
    */
   protected function getMailCC(PhabricatorLiskDAO $object) {
     $phids = array();
     $has_support = false;
 
     if ($object instanceof PhabricatorSubscribableInterface) {
       $phids[] = $this->subscribers;
       $has_support = true;
     }
 
     if ($object instanceof PhabricatorProjectInterface) {
       $project_phids = PhabricatorEdgeQuery::loadDestinationPHIDs(
         $object->getPHID(),
         PhabricatorProjectObjectHasProjectEdgeType::EDGECONST);
 
       if ($project_phids) {
         $watcher_type = PhabricatorEdgeConfig::TYPE_OBJECT_HAS_WATCHER;
 
         $query = id(new PhabricatorEdgeQuery())
           ->withSourcePHIDs($project_phids)
           ->withEdgeTypes(array($watcher_type));
         $query->execute();
 
         $watcher_phids = $query->getDestinationPHIDs();
         if ($watcher_phids) {
           // We need to do a visibility check for all the watchers, as
           // watching a project is not a guarantee that you can see objects
           // associated with it.
           $users = id(new PhabricatorPeopleQuery())
             ->setViewer($this->requireActor())
             ->withPHIDs($watcher_phids)
             ->execute();
 
           $watchers = array();
           foreach ($users as $user) {
             $can_see = PhabricatorPolicyFilter::hasCapability(
               $user,
               $object,
               PhabricatorPolicyCapability::CAN_VIEW);
             if ($can_see) {
               $watchers[] = $user->getPHID();
             }
           }
           $phids[] = $watchers;
         }
       }
 
       $has_support = true;
     }
 
     if (!$has_support) {
       throw new Exception('Capability not supported.');
     }
 
     return array_mergev($phids);
   }
 
 
   /**
    * @task mail
    */
   protected function buildMailBody(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     $headers = array();
     $comments = array();
 
     foreach ($xactions as $xaction) {
       if ($xaction->shouldHideForMail($xactions)) {
         continue;
       }
 
       $header = $xaction->getTitleForMail();
       if ($header !== null) {
         $headers[] = $header;
       }
 
       $comment = $xaction->getBodyForMail();
       if ($comment !== null) {
         $comments[] = $comment;
       }
     }
 
     $body = new PhabricatorMetaMTAMailBody();
     $body->setViewer($this->requireActor());
     $body->addRawSection(implode("\n", $headers));
 
     foreach ($comments as $comment) {
       $body->addRemarkupSection($comment);
     }
 
     if ($object instanceof PhabricatorCustomFieldInterface) {
       $field_list = PhabricatorCustomField::getObjectFields(
         $object,
         PhabricatorCustomField::ROLE_TRANSACTIONMAIL);
       $field_list->setViewer($this->getActor());
       $field_list->readFieldsFromStorage($object);
 
       foreach ($field_list->getFields() as $field) {
         $field->updateTransactionMailBody(
           $body,
           $this,
           $xactions);
       }
     }
 
     return $body;
   }
 
 
 /* -(  Publishing Feed Stories  )-------------------------------------------- */
 
 
   /**
    * @task feed
    */
   protected function shouldPublishFeedStory(
     PhabricatorLiskDAO $object,
     array $xactions) {
     return false;
   }
 
 
   /**
    * @task feed
    */
   protected function getFeedStoryType() {
     return 'PhabricatorApplicationTransactionFeedStory';
   }
 
 
   /**
    * @task feed
    */
   protected function getFeedRelatedPHIDs(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     $phids = array(
       $object->getPHID(),
       $this->getActingAsPHID(),
     );
 
     if ($object instanceof PhabricatorProjectInterface) {
       $project_phids = PhabricatorEdgeQuery::loadDestinationPHIDs(
         $object->getPHID(),
         PhabricatorProjectObjectHasProjectEdgeType::EDGECONST);
       foreach ($project_phids as $project_phid) {
         $phids[] = $project_phid;
       }
     }
 
     return $phids;
   }
 
 
   /**
    * @task feed
    */
   protected function getFeedNotifyPHIDs(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     return array_unique(array_merge(
       $this->getMailTo($object),
       $this->getMailCC($object)));
   }
 
 
   /**
    * @task feed
    */
   protected function getFeedStoryData(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     $xactions = msort($xactions, 'getActionStrength');
     $xactions = array_reverse($xactions);
 
     return array(
       'objectPHID'        => $object->getPHID(),
       'transactionPHIDs'  => mpull($xactions, 'getPHID'),
     );
   }
 
 
   /**
    * @task feed
    */
   protected function publishFeedStory(
     PhabricatorLiskDAO $object,
     array $xactions,
     array $mailed_phids) {
 
     $xactions = mfilter($xactions, 'shouldHideForFeed', true);
 
     if (!$xactions) {
       return;
     }
 
     $related_phids = $this->getFeedRelatedPHIDs($object, $xactions);
     $subscribed_phids = $this->getFeedNotifyPHIDs($object, $xactions);
 
     $story_type = $this->getFeedStoryType();
     $story_data = $this->getFeedStoryData($object, $xactions);
 
     id(new PhabricatorFeedStoryPublisher())
       ->setStoryType($story_type)
       ->setStoryData($story_data)
       ->setStoryTime(time())
       ->setStoryAuthorPHID($this->getActingAsPHID())
       ->setRelatedPHIDs($related_phids)
       ->setPrimaryObjectPHID($object->getPHID())
       ->setSubscribedPHIDs($subscribed_phids)
       ->setMailRecipientPHIDs($mailed_phids)
       ->setMailTags($this->getMailTags($object, $xactions))
       ->publish();
   }
 
 
 /* -(  Search Index  )------------------------------------------------------- */
 
 
   /**
    * @task search
    */
   protected function supportsSearch() {
     return false;
   }
 
 
 /* -(  Herald Integration )-------------------------------------------------- */
 
 
   protected function shouldApplyHeraldRules(
     PhabricatorLiskDAO $object,
     array $xactions) {
     return false;
   }
 
   protected function buildHeraldAdapter(
     PhabricatorLiskDAO $object,
     array $xactions) {
     throw new Exception('No herald adapter specified.');
   }
 
   private function setHeraldAdapter(HeraldAdapter $adapter) {
     $this->heraldAdapter = $adapter;
     return $this;
   }
 
   protected function getHeraldAdapter() {
     return $this->heraldAdapter;
   }
 
   private function setHeraldTranscript(HeraldTranscript $transcript) {
     $this->heraldTranscript = $transcript;
     return $this;
   }
 
   protected function getHeraldTranscript() {
     return $this->heraldTranscript;
   }
 
   private function applyHeraldRules(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     $adapter = $this->buildHeraldAdapter($object, $xactions);
     $adapter->setContentSource($this->getContentSource());
     $adapter->setIsNewObject($this->getIsNewObject());
     $xscript = HeraldEngine::loadAndApplyRules($adapter);
 
     $this->setHeraldAdapter($adapter);
     $this->setHeraldTranscript($xscript);
 
     return array_merge(
       $this->didApplyHeraldRules($object, $adapter, $xscript),
       $adapter->getQueuedTransactions());
   }
 
   protected function didApplyHeraldRules(
     PhabricatorLiskDAO $object,
     HeraldAdapter $adapter,
     HeraldTranscript $transcript) {
     return array();
   }
 
 
 /* -(  Custom Fields  )------------------------------------------------------ */
 
 
   /**
    * @task customfield
    */
   private function getCustomFieldForTransaction(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
 
     $field_key = $xaction->getMetadataValue('customfield:key');
     if (!$field_key) {
       throw new Exception(
         "Custom field transaction has no 'customfield:key'!");
     }
 
     $field = PhabricatorCustomField::getObjectField(
       $object,
       PhabricatorCustomField::ROLE_APPLICATIONTRANSACTIONS,
       $field_key);
 
     if (!$field) {
       throw new Exception(
         "Custom field transaction has invalid 'customfield:key'; field ".
         "'{$field_key}' is disabled or does not exist.");
     }
 
     if (!$field->shouldAppearInApplicationTransactions()) {
       throw new Exception(
         "Custom field transaction '{$field_key}' does not implement ".
         "integration for ApplicationTransactions.");
     }
 
     $field->setViewer($this->getActor());
 
     return $field;
   }
 
 
 /* -(  Files  )-------------------------------------------------------------- */
 
 
   /**
    * Extract the PHIDs of any files which these transactions attach.
    *
    * @task files
    */
   private function extractFilePHIDs(
     PhabricatorLiskDAO $object,
     array $xactions) {
 
     $blocks = array();
     foreach ($xactions as $xaction) {
       $blocks[] = $this->getRemarkupBlocksFromTransaction($xaction);
     }
     $blocks = array_mergev($blocks);
 
     $phids = array();
     if ($blocks) {
       $phids[] = PhabricatorMarkupEngine::extractFilePHIDsFromEmbeddedFiles(
         $this->getActor(),
         $blocks);
     }
 
     foreach ($xactions as $xaction) {
       $phids[] = $this->extractFilePHIDsFromCustomTransaction(
         $object,
         $xaction);
     }
 
     $phids = array_unique(array_filter(array_mergev($phids)));
     if (!$phids) {
       return array();
     }
 
     // Only let a user attach files they can actually see, since this would
     // otherwise let you access any file by attaching it to an object you have
     // view permission on.
 
     $files = id(new PhabricatorFileQuery())
       ->setViewer($this->getActor())
       ->withPHIDs($phids)
       ->execute();
 
     return mpull($files, 'getPHID');
   }
 
   /**
    * @task files
    */
   protected function extractFilePHIDsFromCustomTransaction(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction) {
     return array();
   }
 
 
   /**
    * @task files
    */
   private function attachFiles(
     PhabricatorLiskDAO $object,
     array $file_phids) {
 
     if (!$file_phids) {
       return;
     }
 
     $editor = new PhabricatorEdgeEditor();
 
     $src = $object->getPHID();
     $type = PhabricatorEdgeConfig::TYPE_OBJECT_HAS_FILE;
     foreach ($file_phids as $dst) {
       $editor->addEdge($src, $type, $dst);
     }
 
     $editor->save();
   }
 
   private function applyInverseEdgeTransactions(
     PhabricatorLiskDAO $object,
     PhabricatorApplicationTransaction $xaction,
     $inverse_type) {
 
     $old = $xaction->getOldValue();
     $new = $xaction->getNewValue();
 
     $add = array_keys(array_diff_key($new, $old));
     $rem = array_keys(array_diff_key($old, $new));
 
     $add = array_fuse($add);
     $rem = array_fuse($rem);
     $all = $add + $rem;
 
     $nodes = id(new PhabricatorObjectQuery())
       ->setViewer($this->requireActor())
       ->withPHIDs($all)
       ->execute();
 
     foreach ($nodes as $node) {
       if (!($node instanceof PhabricatorApplicationTransactionInterface)) {
         continue;
       }
 
       $editor = $node->getApplicationTransactionEditor();
       $template = $node->getApplicationTransactionTemplate();
       $target = $node->getApplicationTransactionObject();
 
       if (isset($add[$node->getPHID()])) {
         $edge_edit_type = '+';
       } else {
         $edge_edit_type = '-';
       }
 
       $template
         ->setTransactionType($xaction->getTransactionType())
         ->setMetadataValue('edge:type', $inverse_type)
         ->setNewValue(
           array(
             $edge_edit_type => array($object->getPHID() => $object->getPHID()),
           ));
 
       $editor
         ->setContinueOnNoEffect(true)
         ->setContinueOnMissingFields(true)
         ->setParentMessageID($this->getParentMessageID())
         ->setIsInverseEdgeEditor(true)
         ->setActor($this->requireActor())
         ->setActingAsPHID($this->getActingAsPHID())
         ->setContentSource($this->getContentSource());
 
       $editor->applyTransactions($target, array($template));
     }
   }
 
 }